StarTech RKCONS1701 1-Port VGA Rackmount LCD konsole gid itilizatè

Quick-Start Gid
SKU #: RKCONS1701

1-Port VGA Rackmount LCD Console |17 in | 1U

Pwodwi Design

Pwodwi aktyèl la ka varye de foto

Devan View

1 Manch NAN ray 3 Mounting Brackets (Installed)

4 Keyboard LEDs 5 Display Menu Buttons 6 Release Switch

Dèyè View

1 Power Connection Port 2 pouvwa switch

3 Ground Connection Screw 4 Host Port

Pake Contents

• LCD Rack Console x 1
• KVM Cables x 1
• M5 kaj nwa x 8
• M5 Vis x 8
• Kòd kouran rejyonal yo (NA, JP, Inyon Ewopeyen, UK, ANZ) x 5
• Mounting ray x 2
• Quick-Start Gid x 1

Kondisyon pou

• 1U of Rack Space
• Baz fil
• Sous pouvwa
• Computer, Server, or KVM
• Phillips Type Screwdriver

Kondisyon yo ka chanje. Pou dènye kondisyon yo, tanpri vizite www.startech.com/RKONS1701.

Enstalasyon

• Atansyon! Double pole / neutral fuse. Disconnect mains before
• Always ground the unit before connecting/disconnecting the Pouvwa kòd.

Mounting the LCD Rackmount Console

Remak: Li pi fasil pou enstale LCD Rackmount Console if another person helps you with the installation.

Avètisman: Use caution and proper lifting techniques when installing the LCD Rackmount Console.

1. Based on the mounting depth of the server rack that you are using, select the appropriate length of Mounting Rails.
2. Decide where in the server rack you want to install the LCD Rackmount Console.
3. Mete la MS Cage Nuts (two per Mounting Post) nan kare a Mounting Twou sou Mounting Posts.
4. Align the rear Mounting Bracket Rails ak nan MS Cage Nuts on the corresponding Mounting Post.
5. Mete yon MS Screw (two per Mounting Post) through the rear Mounting Bracket Rail ak nan la MS Cage Nut. Do not tighten the MS Screws.
6. With assistance, slide the LCD Rackmount Console into the server rack guiding the rear Mounting Bracket Rails nan la Rail Assembly.
7. Insert an MS Screw (two per Mounting Post) through the front Mounting Bracket Rail nan la MS Cage Nut.
8. Sèvi ak Phillips Type Screwdriver sere boulon an MS Screws.
9. Ensure that the rear Ray are properly aligned.
10. Sèvi ak Phillips Type Screwdriver sere boulon an MS Screws. Grounding the LCD Console

Notes: Grounding wires are typically green or green with a yellow stripe, and should be at least 18 AWG.

Grounding is recommended in all environments and essential in environments with high levels of electromagnetic interference (EMI), or frequent electrical surges.

1. Sèvi ak yon Phillips tèt tournevis, dekole la baz Connection Screw.
2. Tache la Baz fil to the shaft of the Grounding Connection Screw.
3. Sere boulon an Grounding Connection Screw, making sure not to over-tighten.
4. Attach the other end of the Baz fil (not connected to the LCD Rackmount Console) to a proper earth-ground

Installation Depth

Konekte konsole a

Konsiderasyon Enpòtan

• If you’re installing the device in a closed or multi-unit rack assembly, ensure that the environmental conditions are within the unit’s maximum and minimum specifications.
• Installing this unit in a rack or cabinet may reduce airflow. Consider your airflow requirement when selecting a location for
• The device should be installed with an even mechanical load.
• It’s recommended that the device be connected to a power source with overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
• The device should be grounded appropriately.

1. Konekte yon Baz fil nan la Ground Connection Screw sou LCD Rackmount Console and to the earth-ground
2. Konekte nan KVM Cable nan yon Computer, Server or KVM and to the host ports on the console.
3. Konekte apwopriye a Corydon pouvwa for your region to the Pouvwa Koneksyon Port sou LCD Rackmount Console ak nan yon Sous pouvwa.
4. Sèvi ak nan Power switch yo vire sou la LCD Rackmount Console.
5. Louvri nan LCD Rackmount Console. For more information about how to do this, see the “Open the console” topic.
6. Vire sou konekte la Odinatè, sèvè or

Disconnect the Console

1. Power off the connected Odinatè, sèvè or
2. Fèmen a LCD Rackmount Console. For more information about how to do this, see the “Close the console” section.
3. Sèvi ak nan Power switch etenn nan LCD Rackmount Console.
4. Dekonekte a Corydon pouvwa ki soti nan Pouvwa Koneksyon Port sou LCD Rackmount Console.

Remak: Toujou dekonekte a Corydon pouvwa before disconnecting the Grounding Wire.

5. Dekonekte a KVM Cable konekte ak yon Computer, Server or
6. (Optional) Disconnect the Baz fil ki konekte nan la Ground Connection Screw sou LCD Rackmount Console.

Operasyon

Open the Console

1. Deplase nan Lage switch to the unlocked position.
2. Sèvi ak nan Manyen pou rale a LCD Rackmount Console out towards you until you hear the LCD Rackmount Console klike an plas.
3. Rale la Display up and position it at the desired angle.

Close the Console

1. Bese a montre until it’s flush against the
2. Slide the switches located on the sides of the console forward and push the LCD Rackmount Console in towards the rear of the rack.
3. Release the switches and continue pushing the LCD Rackmount konsil the rest of the way into the rack.

Mezi sekirite

• Fini revokasyon pa ta dwe fèt ak pwodwi a ak / oswa liy elektrik anba pouvwa.
• Product installation and/or mounting should be completed by a certified professional.
• Please note that the included power cables are for use with this product only and cannot be used with other electrical devices.

Deklarasyon Konfòmite FCC

Ekipman sa a te teste epi yo te jwenn konfòme li avèk limit yo pou yon aparèy dijital Gwoup B, dapre pati 15 nan Règleman FCC yo. Limit sa yo fèt pou bay pwoteksyon rezonab kont entèferans danjere nan yon enstalasyon rezidansyèl. Ekipman sa a jenere, itilize, epi li ka gaye enèji frekans radyo epi, si li pa enstale ak itilize an akò avèk enstriksyon yo, ka lakòz entèferans danjere nan kominikasyon radyo yo. Sepandan, pa gen okenn garanti ke entèferans pa pral rive nan yon enstalasyon patikilye. Si ekipman sa a lakòz entèferans danjere nan radyo oswa resepsyon televizyon, ki ka detèmine pa vire ekipman an sou yo ak sou, se itilizatè a ankouraje pou yo eseye korije entèferans la pa youn oswa plis nan mezi sa yo:

• Reoryante oswa deplase antèn k ap resevwa a.
• Ogmante separasyon ki genyen ant ekipman an ak reseptè.
• Konekte ekipman an nan yon priz sou yon sikwi diferan de sa ki reseptè a konekte.
• Konsilte konsesyonè a oswa yon teknisyen radyo / televizyon ki gen eksperyans pou èd

Aparèy sa a konfòme li avèk pati 15 nan Règleman FCC yo. Operasyon an sijè a de kondisyon sa yo:

(1) Aparèy sa a pa ka lakòz entèferans danjere, ak
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Deklarasyon endistri Kanada

Aparèy dijital Gwoup B sa a konfòme li avèk Kanadyen ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B) / NMB-3 (B)
Aparèy sa a konfòm ak lisans egzante endistri Kanada RSS (yo). Operasyon an sijè a de kondisyon sa yo:
(1) Aparèy sa a pa ka lakòz entèferans, ak (2) Aparèy sa a dwe aksepte nenpòt entèferans, ki gen ladan entèferans ki ka lakòz operasyon endezirab nan aparèy la.

Sèvi ak mak komèsyal, mak komèsyal ki anrejistre, ak lòt non ak senbòl ki pwoteje
Manyèl sa a ka fè referans a mak komèsyal, mak anrejistre, ak lòt non pwoteje ak / oswa senbòl nan konpayi twazyèm-pati ki pa gen rapò nan okenn fason StarTech.com.
Kote yo parèt referans sa yo se pou rezon ilistrasyon sèlman epi yo pa reprezante yon andòsman yon pwodwi oswa yon sèvis pa StarTech.com, oswa yon andòsman nan pwodwi a (yo) manyèl sa a aplike pa konpayi an twazyèm pati nan kesyon an. StarTech.com rekonèt ke tout mak komèsyal, mak anrejistre, mak sèvis, ak lòt non pwoteje ak/oswa senbòl ki genyen nan manyèl sa a ak dokiman ki gen rapò se pwopriyete detantè respektif yo.

Enfòmasyon sou garanti

Pwodwi sa a apiye pa yon garanti de ane. StarTech.com garanti pwodwi li yo kont domaj nan materyèl ak atizan konn fè pou peryòd yo te note, apre dat inisyal la nan achte. Pandan peryòd sa a, pwodwi yo ka retounen pou reparasyon oswa ranplasman ak pwodwi ekivalan nan diskresyon nou an. Garanti a kouvri pati ak depans travay sèlman. StarTech.com pa garanti pwodwi li yo soti nan domaj oswa domaj ki rive soti nan move itilizasyon, abi, chanjman, oswa mete nòmal ak chire.

Limit nan responsablite

Nan okenn ka, responsablite StarTech.com Ltd. ak StarTech.com USA LLP (oswa ofisye yo, direktè yo, anplwaye yo, oswa ajan yo) pou nenpòt domaj (si dirèk oswa endirèk, espesyal, pinitif, okazyonèl, konsekan, oswa otreman) , pèt nan pwofi, pèt nan biznis, oswa nenpòt pèt lajan, ki rive soti nan oswa ki gen rapò ak itilize nan pwodwi a depase pri aktyèl la peye pou pwodwi a. Gen kèk eta ki pa pèmèt esklizyon oswa limit domaj ensidan oswa konsekan. Si lwa sa yo aplike, limit yo oswa esklizyon ki genyen nan deklarasyon sa a pa ka aplike pou ou.

StarTech.com Ltd. 45 atizan Kwasan London, Ontario N5V 5E9 CanadaFR: startech.com/fr DE: startech.com/de ES: startech.com/es NL: startech.com/nl IT: startech.com/it JP: startech.com/jp

StarTech.com LLP 4490 Sid Hamilton Road Groveport, Ohio 43125 USA a

StarTech.com Ltd. Inite B, Pinnacle 15 Wout Gowerton Brackmills, Nòamptòn NN4 7BW Wayòm Ini

StarTech.com Ltd. Siriusdreef 17-27 2132 WT Hoofddorp Pays-Bas

For manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manyèl Revizyon: 09/23/2021

Dokiman / Resous

StarTech RKCONS1701 1-Port VGA Rackmount LCD Console [pdf] Gid itilizatè RKCONS1701, 1-Port VGA Rackmount LCD Console, RKCONS1701 1-Port VGA Rackmount LCD Console, Rackmount LCD Console, LCD Console

Referans

• aparèy.rapò
• aparèy.rapò
• You | Fabricant de cuisines aménagées & salles de bains sur-mesure
• aparèy.rapò