Manyèl itilizatè
Fast Wireless Machin Charger

Shenzhen Xuanfeng Innovations Technology FD01 Fast Wireless Car Charger

Product Features

  1. Smart touch button and LED indicator on both sides, fully automatic induction,one-hand operation.
  2. Build-in wireless charging transmitter, support Qi wireless charging for all Qi-enabled smartphones.
  3. Adjustable feet suitable for phones of different sizes, anti-slip silicone on both arms and feet, Type-C charging port.
  4. Built-in stepper motor works noiselessly.
  5. NPO capacitors ensure lower charging temperature and higher charging efficiency.
  6. Mòd sibstiti: limyè endikatè ki ap dirije vèt ak ble a klere altènativman, Lè sa a, limyè endikatè vèt la ap kontinye limen.
  7. Charging mode: the blue LED indicator light keeps on.
  8. FOD function. When metal or magnet objects are on the charger, the blue and green LED indicator light flash 6 times for reminding.
  9. Perfect protection function based on over-voltage protection, over current protection, over-temperature protection, and short circuit protection.


Antre DC5V2A
DC9V 1.67A
Sòti 10W/7.5W15W
Pwodwi estanda Qi
Chaje Distans <5mm
Chaje Efikasite
Dimansyon pwodwi 4120x50x65mm
Materyèl pwodwi ABS + PC

*Fast wireless charging requires QC2.0/3.0 quick car charger.

Gid Operasyon pwodwi

  1. Please make sure the product is power supplied.
  2. The green LED indicator light keeps on once the charger is power supplied.
  3. The LED indicator light will flash and the product will stop charging when the current is too large or there is a foreign object on the charger. Do not charge the phone in these situations.
  4. Touch the power button to open the two arms and place the phone on the charger, then the phone will start wireless charging and the two arms lock automatically. Only need to touch the power button to release two arms if you want to take out the phone.
  5. Wireless receiver module or case is not included in this product. Please purchase them separately if your phone does not support wireless charging.


  1. Please do not vigorously extrude or bump the product.
  2. Please do not dismantle the product. Do not put it on fire or drop it in water.
  3. Please do not use it in severely high temperatures, high humidity or corrosive environment to avoid damage to the circuit.
  4. Please do not put a magnetic card or chip card ( such as an ID card, bank card, etc) on the charging pad to prevent the card from losing effectiveness.
  5. Please do not put metal (such as coins etc) on the charging pad to avoid damage from heating.

Deklarasyon Avètisman FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and or the user is encouraged to try to correct the interference by one or more of the following measures:
- Reoryante oswa deplase antèn k ap resevwa a.
- Ogmante separasyon ki genyen ant ekipman an ak reseptè.
- Konekte ekipman an nan yon priz sou yon sikwi diferan de sa ki reseptè a konekte.
- Konsilte konsesyonè a oswa yon teknisyen ki gen eksperyans radyo / televizyon pou èd.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions(1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. RF Exposure StatementTo maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Dokiman / Resous

Shenzhen Xuanfeng Innovations Technology FD01 Fast Wireless Car Charger [pdf] Manyèl itilizatè
FD01, 2A5DD-FD01, 2A5DDFD01, FD01 Fast Wireless Car Charger, Fast Wireless Car Charger, Car Charger, Charger

Kite yon kòmantè

Adrès imèl ou pa pral dwe pibliye.