Manyèl itilizatè Q&ARepons
08 avril 2025 - 09:28 AM
To install an attachment to the RYOBI P20101BTL Atachman Kapab Koulè Fil, swiv etap sa yo:
1. Etenn motè a epi retire pake batri a.
2. Loosen the xxxx on the coupler of the power head shaft and remove the end cap from the attachment.
3. Push in the button located on the attachment shaft. Align the button with the guide recess on the power head coupler and slide the two shafts together. Rotate the attachment shaft until the button locks into the positioning hole.
4. Slightly rotate from side to side until the button is locked into place.
5. Tighten the xxxx securely.
Please note that this power head is designed to be used only with specific RYOBI EXPAND-IT attachments. Using other attachments could cause serious personal injuries or property damage. Always refer to the operator's manual for each attachment for specific instructions and safety information.
Ajoute yon nouvo kòmantè