Manyèl itilizatè Q&ARepons
27 Desanm 2023 - 02:52 AM
Pou program your Philips Universal Remote to control your TV, you can follow the Direct Code Entry method. Here are the step-by-step instructions:
1. Locate the Code List included with your remote. Find the section for the type of device you wish to control (e.g., TV).
2. Locate the brand of your TV and circle all the remote codes for that brand.
3. Peze epi kenbe bouton SETUP la sou telekòmand lan jiskaske limyè wouj la limen. Lage bouton SETUP la. Limyè wouj la ap rete limen.
4. Peze epi lage bouton televizyon an sou telekòmand lan. Limyè wouj la ap flache yon fwa epi li rete limen.
5. Sèvi ak bouton nimewo yo sou telekòmand lan pou antre premye kòd 4 chif ou te antoure nan Lis Kòd la. Limyè wouj la ap etenn apre ou fin antre katriyèm chif la.
6. Point the remote at your TV and test the buttons on the remote to see if the TV responds as you would expect. If the buttons do not operate the TV, repeat steps 3-5 using the next code that you circled for your TV brand.
7. Repeat steps 3-6 for each TV brand you wish to control.
Note: Some codes may only operate a few functions of your TV. If you find that the remote does not control all the desired functions, you can try programming the remote with a different code from the Code List.
For more detailed instructions and troubleshooting tips, you can refer to the complete instruction guide provided with your Philips Universal Remote.
Ajoute yon nouvo kòmantè