EK Lights
User Manual for EK models including: K35, K35 LED Moving Head Light, LED Moving Head Light, Moving Head Light, Head Light
Guangdong Yiri Lighting Technology Co., Ltd. No. 55, Zhongzhun Road, Cuiheng New District, Zhongshan City, Guangdong, China Tel 86 0760 8828 0099
K35 - EK Lights
Strobe. 0~30Hz. LED Frequency. 40K Hz. Dimmer. 4 dimming curves with 0~100 ... 39CH/41CH. Display. 2.83inch TFT disply. Data Connection. Amphenol 3Pin(or 5Pin) ...
File Info : application/pdf, 22 Pages, 4.34MB
DocumentDocumentwww.eklights.com CONTENTS SAFETY 01 INTRODUCTION 02 PHOTOMETRICS 03 COLOR & GOBO 04 DIMENSION 05 OVERVIEW 06 INSTALLATION 07 CONNECTION 08 MENU 10 DMX CHART 14 MAINTENANCE 19 SAFETY WARNING!Before carrying out any operations with the unit,carefully read this instruction manual and keep it with care for future reference,It contains important information about the installation,user and maintenance of the unit. General instruction - The products referred to in this manual conform to the European Community Directives and are therefore marked with CE. - The unit is supplied with hazardous network voltage (230V~). Leave serving to skilled personnel only. Never make any modifications on the unit not described in this instruction manual,otherwise you will risk an electric shock. - Connection must be made to power supply system fitted with efficient earthing (Class I appliance according to standard EN60598-1) .It is moreover,recommended to protect the supply lines of the units from indirect contact and/or shorting to earth by using appropriately sized residual current devices. - The connection to the main network of electric distribution must be carried out by a qualified electrical installer. Check that the main frequency and voltage correspond to those for which the unit is designed as given on the electrical data lable. - This unit is not for home use,only professional applications. - Never use the fixture under the following conditions: · in places subject to vibrations or bumps; · in places with a temperature of over 40¥. - Make certain that no inflammable liquids,water ot metal objects enter the fixture, - Do not dismantle or modify the fixture. - All work must always be carried out by qualified technical personnel.Contact the nearest sales point for an inspection or contact the manufacturer directly. - If the unit is to be put out of operation definitively,take it to a local recyling plant for a dosposal which is not harmful to the environment. Warnings and installation precautions - If this device will be operated in any way different to the one described in this manual,it may suffer damage and the guarantee becomes void.Furthermore,any operation may lead to dangers like short circuit,burns,electric shock,etc. - Before starting any maintenance work or cleaning the fixture,cut off power from the main supply. - Always additionally secure the fixture with the safety rope.When carrying out any work,always comply scrupulously with all the regulations (particularly regarding safety) currently in force in the country in which the fixture's being used. - Install the fixture in a well ventilated place. - Keep any inflammable materials at a safe distance from the fixture. - Shields,lenses or ultraviolet screens shall be changed if they have become damaged to such an extent that their effectiveness is impaired. - The lamp (LED) shall be changed if it has become damaged or thermally deformed. - Never look directly at the light beam.Please note that fast changes in lighting,e.g. flashing light,may trigger epileptic seizures in photosensitive persons or persons with epilepsy. - Do not touch the product's housing when operating because it may be very hot. 01 www.eklights.com INTRODUCTION FEATURES · Creative double-sided design provides flexible solutions for different applications ·900W 6000K LED engine ·Up to 20000lm output ·Exquisite color rendition, Ra96, R992 ·Linear CTO correction of 2600K~6700K ·8x wide-raging zoom of 5.7°j51° with quick and precise control ·Extremely even spot with flawless field consistency ·Dual 1° light frost for instant softening of gobo and framing ·40K Hz high-frequency output for flicker-free video playback ·Quiet operation suitable for any noise-sensitive applications ·DMX and RDM control SPECIFICATIONS Light Source Color Tempeature Lumen Output Lux Output CRI DUV TM-30-15rg/rf TLCI LED Life Beam Angle PAN TILT Color System Gobo System Framing System Iris Zoom Frost Strobe LED Frequency Dimmer Prism Mains Consumption Fuse 900W LED engine 6000±300K Up to 20000lm 58000lux@5M Ra96, R992 0.0023 100/93 98 Over 20K hrs 5.7~51° 540° 270° CMY + CTO(2600K~6200K, linear) + Color Wheel(6+open) 1 * rotating gobo wheel (7 interchangeable glass gobo + open) 1 * fixed gobo wheel (8 interchangeable glass gobo + open) 1 * animation wheel 4 independent blades, each with +/-35° rotation, complete system with +/-60° rotation Motorzied iris, 0~100% adjustable 5.7° ~ 51° motorized zoom Dual 1° frost for edge softening 0~30Hz 40K Hz 4 dimming curves with 0~100% adjustable Bi-directional 4-facet prism with variable speed 100~240V AC, 50~60Hz 1240W @ 230VAC T10A, 250V 02 SPECIFICATIONS Power Connection Power Factor Protocol DMX Channel Display Data Connection Housing Cooling Operating Ambient Tempt. Dimension Weight PowerCON True One In 0.95@230VAC DMX512/RDM 39CH/41CH 2.83inch TFT disply Amphenol 3Pin(or 5Pin) XLR for DMX, linking up to 32pcs Flame-retardant nylon with matt black finish Low noise fan with heat pipe 0~45°C 439.2*315.8*744.9mm 38KG PHOTOMETRICS 5.7° Distance(m) 5 10 20 30 50 Illuminance(lux) 58000 14500 3620 1610 580 Diameter(m) 0.5 1 2 3 5 51° Distance(m) 3 5 10 20 30 Illuminance(lux) 3889 1400 350 88 39 Diameter(m) 2.88 4.8 9.6 19.2 28.8 03 www.eklights.com $0-034:45&. COLOR & GOBO 305"5*/((0#0 2700K-6000K '*9&%(0#0 '3".*/(4)655&3 "/*."5*0/ '"$&513*4. 04 D*.&/4*0/ 05 www.eklights.com Fixture Illustration OVERVIEW 1. CONTROL PANEL 2. PowerCon True1 In 3. Fuse Control Panel 4. 3Pin(or 5Pin) DMX In 5. 3Pin(or 5Pin) DMX Out 6. Fixing clamp OK MODE MENU UP DOWN ENTER OK ILLUSTRATION FUNCTION DESCRIPTION EFFECT Menu Option Enter the menu Menu operation Up Scroll up Increase the numeric value Down Scroll down Decrease the numeric value Confirm Confirm Save the function Confirm Confirm Save the function If the panel is password-protected, go to the Advanced menu, in the Menu locking submenu, enter the Unlock code using the navigation buttons: 1234 If you want to flip the display, hold UP + DOWN buttons for 3seconds to set display orientation. 06 INSTALLATION We recommend the following general guidelines below: 1. Always mount this product in a safe position and make sure there is adequate room for ventilation, configuration and maintenance. 2. Keep any inflammable materials at a safe distance from the fixture, as indicated in the safety notes. 3. Make sure that the device is not exposed to extreme heat, moisture or dust. 4. Make sure that the structure to which you are hanging the modules can support the weight. The KX0 may be set up on a solid and even surface. The unit can also be mounted upside down to a cross arm. For fixing, stable mounting clips are required. The mounting place must be sufficient stability and be able to support a weight of 10 times of the unit's weight. When carrying out any installation, always comply scrrupulously with all the regulations (particularly regarding safety) currently in force in the country in which the fixture's being used. · Install the fixture at a suitable location by means of the mounting bracket · Always additionally secure the fixture with the safety rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum fall of the fixture will be 20 cm. · Adjust the fixture and use the knob to slightly release or tighten the locking mechanism of the bracket if is neccessary 07 www.eklights.com CONNECTION POWER CONNECTION Using PowerCon In power cable connected in series Attention: due to power rating, one 1.5mm² power cable can connect 1 unit maximum Power IN WARNING Do not connect more than one unit in series with one power cable Do not use damage power cable Power off the fixture when not in use 08 CONNECTION DATA CONNECTION DMX512 4+>: · Depending on the length of the DMX cable run, or other factors, it may be advisable to install a terminator at the last fixture in the run. · The illustration below shows the correct placement of a 120 0.25W resistor in a terminator, as well as the standard DMX signal pin-outs 1 2 3 45 COMMON DMXDMX+ Not Used Not Used 1 2 3 45 5 4 3 12 DMX INPUT 1 3 2 COMMON DMX+ DMX- DMX OUTPUT 120 1/4 W resistor 1 3 2 2 3 1 EXAMPLE OF DMX ADDRESSING The below table shows an example of starting addresses for four fixtures assuming a first fixture with starting address of 001. The actual starting addresses will be determined by the operator as needed to match external controller settings. Relation between DMX and Address MODE ALLOCATION 39CH 001 - 039 41CH 001 - 041 START ADDRESS 1ST FIXTURE 001 001 START ADDRESS 2ND FIXTURE 040 042 START ADDRESS 3RD FIXTURE 079 083 START ADDRESS 4TH FIXTURE 118 124 Follow above method for subsequent fixtures, calculating starting addressed as indicated. 09 www.eklights.com NO. Main Menu 1 CONNECT 2 SETUP Menu Level 1 DMX Address DMX Mode Movement Screen Fixture Auto Test Manual Test MENU Menu Level 2 CH39 1-474CH41 1-472 STANDARD-39CH EXTENDED-41CH Pan Reverse Tilt Reverse Encoder pan/Tilt Back Light Flip Display Warn Cue Key Lock Dimmer Mode Dimmer curve Fan Mode Temperature unit Auto Test ... Pan Pan Fine Tilt Tilt Fine P/T Speed Shutter Dimmer Dim Fine 10 Menu Level 3 Default Default: 1 Default: 39CH No Yes No Yes No Yes On 10S 20S 30S No Yes Auto Off On No Yes Dimmer 1 Dimmer 2 Dimmer 3 Dimmer 4 Linear EXPOnentiel Logarithmic S-curve Auto Silent High Off °C °F Default: NO Default: NO Default: YES Default: NO Default: No Default: No Default: No Default:Dimmer 1 Default:Logarithmic Default: Auto Default: °C 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 NO. Main Menu Menu Level 1 2 SETUP Manual Test Reset 3 ADVANCED Adjust MENU Menu Level 2 Dim Fade Cyan Magenta Yellow CTO Color Gobo1 RGobo Gobo2 Prism Rot Prism Frost Focus 4+>: Focus Fine Zoom Zoom Fine Effect Rot Effect Iris Fr.shutter 1 Move. Fr.shutter 1 Swiv. Fr.shutter 2 Move. Fr.shutter 2 Swiv. Fr.shutter 3 Move. Fr.shutter 3 Swiv. Fr.shutter 4 Move. Fr.shutter 4 Swiv. shu Rot. Fr Macros Macros Sp Control ALL PAN/Tilt Head Pan Tilt Cyan Magenta Yellow CTO Color Gobo1 RGobo1 Gobo2 Prism 11 Menu Level 3 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 Default www.eklights.com NO. Main Menu Menu Level 1 Adjust 3 ADVANCED Factory Reload Fixture hours Fans Speed Software Version 4 INFORMATION RDM UID View DMX MENU Menu Level 2 R Prism Effect Focus Zoom Frost 1 Iris Fr.shutters Rot. Fr.shutter 1 M1 Fr.shutter 1 M2 Fr.shutter 2 M1 Fr.shutter 2 M2 Fr.shutter 3 M1 Fr.shutter 3 M2 Fr.shutter 4 M1 Fr.shutter 4 M2 Detault preset user preset1 user preset2 user preset3 0-9999 100% DISP- V1.0 CTR1-XY- V1.0 CTR2-MOTOR-V1.0 CTR3-MOTOR-V1.0 CTR4-MOTOR-V1.0 030F0AB***** Pan Pan Fine Tilt Tilt Fine P/T Speed Shutter Dimmer Dim Fine Dim Fade Cyan 12 Menu Level 3 Default 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 Reset To Default GoBack Load preset1 save to preset1 Load preset2 save to preset2 Load preset3 save to preset3 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 NO. Main Menu Menu Level 1 4 INFORMATION View DMX MENU Menu Level 2 Magenta Yellow CTO Color RGobo1 RGobo Gobo2 Prism Rot Prism Frost Focus Focus Fine Zoom Zoom Fine Effect Rot Effect lris Fr.shutter 1 Move. Fr.shutter 1 Swiv. Fr.shutter 2 Move. Fr.shutter 2 Swiv. Fr.shutter 3 Move. Fr.shutter 3 Swiv. Fr.shutter 4 Move. Fr.shutter 4 Swiv. shu Rot. Fr Macros Macros Sp Menu Level 3 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 Default 13 www.eklights.com 39CH 41CH 1 1 d 2 3 3 4 4 5 5 Function Pan Pan Fine Tilt Tilt Fine P/T Speed 6 6 Strobe 7 7 8 8 9 9 10 10 11 11 12 12 13 13 Dimmer Dimmer Fine Dimmer Mode Cyan Magenta Yellow CTO 14 14 Color DMX CHART Value 000-255 000-255 000-255 000-255 000-250 251-255 000-010 011-082 083-093 094-163 164-174 175-243 244-255 000-255 000-255 000-051 052-101 102-152 153-203 204-255 000-255 000-255 000-255 000-255 000-004 005-009 010-013 014-018 019-022 023-027 028-031 032-036 037-040 041-045 046-049 050-054 055-058 059-063 064-095 096-127 128-255 Percent/Setting Pan Coarse Pan Fine Tilt Coarse Tilt Fine Fastes to Slowest Movement with Blackot No function (shutter open) Shutter effect slow to fast No function (shutter open) Pulse-effect in sequences No function (shutter open) Random Shutter effect slow to fast No function (shutter open) Dimmer 0%-100% Dimmer Fine Off Dimmer 1 Dimmer 2 Dimmer 3 Dimmer 4 CTO 0~100% White White +Color1 Color1 Color1 + Color2 Color2 Color2 + Color3 Color3 Color3 + Color4 Color4 Color4 + Color5 Color5 Color5 + Color6 Color6 Color6 + White Slow to Fast(Forward Spin) Slow to Fast(Revers Spin) Positioning from 0-360 degrees(Indexing) 14 DMX CHART 39CH 41CH Function 15 15 Gobo Wheel 1 16 16 Gobo Wheel 1,gobo rotation / 17 Gobo Wheel 1,gobo rotation Fine 17 18 Gobo Wheel 2 Value 000-005 006-010 011-015 016-020 021-025 026-030 031-035 036-040 041-055 056-070 071-085 086-100 101-115 116-130 131-145 146-201 202-255 000-191 192-221 222-225 226-255 Percent/Setting Open Position 1 Position 2 Position 3 Position 4 www.eklights.com Position 5 Position 6 Position 7 Position 1 (Position 1 Shake,from slow to fast) Position 2 (Position 2 Shake,from slow to fast) Position 3 (Position 3 Shake,from slow to fast) Position 4 (Position 1 Shake,from slow to fast) Position 5 (Position 5 Shake,from slow to fast) Position 6 (Position 6 Shake,from slow to fast) Position 7 (Position 7 Shake,from slow to fast) Positioning from 0-360 degrees(Indexing) Stop to fastest (Reverse Wheel Spin) Positioning from 0-360 degrees(Indexing) Fastest to Slowest(Forward Spin) Stop Fastest to Slowest(Reverse Spin) 0-255 Gobo Wheel 1,gobo rotation Fine 0-360 degrees 0-7 8-15 16-23 24-31 32-39 40-47 48-55 56-63 64-71 72-113 114-117 118-159 160-171 172-195 184-195 196-207 208-219 220-231 232-243 244-255 15 Open Position 1 Position 2 Position 3 Position 4 Position 5 Position 6 Position 7 Position 8 Fast to Stop(Reverse Spin) Positioning from 0-360 degrees(Indexing) Stop to fastest (Forward Wheel Spin) Position 1 (Position 1 Shake,from slow to fast) Position 2 (Position 2 Shake,from slow to fast) Position 3 (Position 3 Shake,from slow to fast) Position 4 (Position 1 Shake,from slow to fast) Position 5 (Position 5 Shake,from slow to fast) Position 6 (Position 6 Shake,from slow to fast) Position 7 (Position 7 Shake,from slow to fast) Position 8 (Position 8 Shake,from slow to fast) www.eklights.com DMX CHART 39CH 41CH Function Value Percent/Setting 18 19 Prism 000-127 Prism Excluded 128-255 Prism Inserted 000-127 Insertion and Positioning from 0-360(Index) 19 20 RPrism 128-188 189-193 1j94-255 fastest to Slowest (Forward Spin) Stop fastest to Slowest (Reverse Spin) / 21 RPrism Fine 000-255 RPrism Fine 20 22 Frost 000-255 Dual Frost 21 23 Focus 000-255 Focus 22 24 Focus Fine 000-255 Focus Fine 23 25 ZOOM 000-255 ZOOM 24 26 ZOOM Fine 000-255 ZOOM Fine 25 27 Effect 000-255 000-004 No Function 26 28 REffect 005-127 Slowest to fastest (Forward Spin) 128-132 Stop 133-255 Slowest to fastest (Reverse Spin) 000-063 From large to small 27 29 Iris 064-127 Close from slow to fast (Effects) 128-191 Open from slow to fast (Effects) 192-255 Open and Close ramdomly 28 30 Framing Shutter 1 movent 000-255 Movement from outward to inward 000-127 Swivelling from -25 degrees towards 0 degrees 29 31 Framing Shutter 1 swivelling 128 0° ¥ 129-255 Swivelling from 0 degrees to +25 degrees 30 32 Framing Shutter 2 movent 000-255 Movement from outward to inward 000-127 Swivelling from -25 degrees towards 0 degrees 31 33 Framing Shutter 2 swivelling 128 0° 129-255 Swivelling from 0 degrees to +25 degrees 32 34 Framing Shutter 3 movent 000-255 Movement from outward to inward 000-127 Swivelling from -25 degrees towards 0 degrees 33 35 Framing Shutter 3 swivelling 128 0° 129-255 Swivelling from 0 degrees to +25 degrees 34 36 Framing Shutter 4 movent 000-255 Movement from outward to inward 000-127 Swivelling from -25 degrees towards 0 degrees 35 37 Framing Shutter 4 swivelling 128 0° 129-255 Swivelling from 0 degrees to +25 degrees 000-127 Rotation from left to center 36 38 Framing Shutters Rotation 128 Center 129-255 Rotation from center to right 16 DMX CHART 39CH 41CH Function 37 39 Framing Shutters Macro 38 40 Framing Shutters Macro Speed 39 41 Control Value 000-003 004-011 012-018 019-025 026-032 033-039 040-047 048-054 055-061 062-068 069-075 076-082 083-090 091-097 098-104 105-111 112-118 119-125 126-133 134-140 141-147 148-155 156-161 162-168 169-176 177-183 184-190 191-197 198-204 205-211 212-219 220-226 227-233 234-240 241-247 248-255 000-255 000-025 026-076 077-127 128-255 Percent/Setting No Function Framing Shutters Macro 1 Framing Shutters Macro 2 Framing Shutters Macro 3 Framing Shutters Macro 4 Framing Shutters Macro 5 Framing Shutters Macro 6 Framing Shutters Macro 7 Framing Shutters Macro 8 Framing Shutters Macro 9 Framing Shutters Macro 10 Framing Shutters Macro 11 Framing Shutters Macro 12 Framing Shutters Macro 13 Framing Shutters Macro 14 Framing Shutters Macro 15 Framing Shutters Macro 16 Framing Shutters Macro 17 Framing Shutters Macro 18 Framing Shutters Macro 19 Framing Shutters Macro 20 Framing Shutters Macro 21 Framing Shutters Macro 22 Framing Shutters Macro 23 Framing Shutters Macro 24 Framing Shutters Macro 25 Framing Shutters Macro 26 Framing Shutters Macro 27 Framing Shutters Macro 28 Framing Shutters Macro 29 Framing Shutters Macro 30 Framing Shutters Macro 31 Framing Shutters Macro 32 Framing Shutters Macro 33 Framing Shutters Macro 34 Framing Shutters Macro 35 Framing Shutters Macro Speed From Slow to Fast No Function Head Rest Pan/Tilt Reset Complete Reset 17 www.eklights.com 18 MAINTENANCE MAINTENANCE AND CLEANING THE UNIT - Make sure the area below the installation place is free from unwanted person during setup. - Switch off the unit,unplug the main cable and wait till the unit has cooled down. - All screws used for installing the device and any of its parts should be tightly fastened and should not be corroded. - Housings,fixations and installation spots (celling,trusses,suspensions) should FRONT LENS be totally free from any deformation. - The main cables must be in impeccable condition and should be replaced ZOOM LENS immediately even when a small problem is detected. FOCUS LENS - It is recommended to clean the front at regular intervals,from impurities CLEAR LENS caused by dust,smoke,or other particles to ensure that the ligh is radiated at maximum brightness.For cleaning,disconnect the main CLUSTER LENS plug from the socket.Use a soft,clean cloth moistened with a mild detergent.Then carefully wipe the parts dry. For cleaning other housing parts use only a soft,clean cloth.Never use a liquid,it might pernetrate the unit and cause damage to it. FUSE REPLACEMENT ¥ 1.Disconnect this product from the power outlet. 2.Using a screwdriver,unscrew the fuse holder cap from the housing. 3.Remove the blown fuse and replace with a good fuse of the same type and rat -ing. 4.Screw the fuse holder cap back in place and reconnect power. Contact an authorized service center in case of technical problems or not reported in the above table cannot be resolved by the procedure given in the table. 19 E K I N C . Address: NO.55 Zhongzhun Road, Cuiheng New District, Zhongshan City, Guangdong Province Phone: 0086 (0760) 88280099 www.eklights.com