Ampeg
Ampeg
Login • Instagram
User Manual for Ampeg models including: 405515 Scrambler Bass Overdrive, 405515, Scrambler Bass Overdrive, Bass Overdrive, Overdrive
Ampeg :: Product Manuals
File Info : application/pdf, 6 Pages, 1.10MB
DocumentDocumentScrambler Bass Overdrive Quick Start Guide What's in the Box Scrambler Bass Overdrive Pedal, Quick Start Guide. Hookup Diagrams Standard Setup PA/Recording Setup 6 7 2 5 4 1 3 3 10 15dB PIN1>> NORMAL 9 8 Front, Rear, Side and Bottom Panel Descriptions 1. Input: Connect a passive or active instrument to this Input jack. 2. Output: Feeds the signal to an external power amplifier, mixer, or recording setup. 3. On/Off Switch: Turns the pedal on/off. The LED indicates on/off status. 4. Volume: Adjusts the overall output level. 5. Scrambler Blend: Blends the affected Scrambler signal with the clean bass signal. 6. Scrambler Drive: Adjusts the amount of Drive. 7. Treble Knob: Boost or cut the levels at certain frequencies to enhance the sound. 8. Power: Input socket for optional AC/DC power supply. 9. Battery (not included): Provides 9V of power (acces- sible by removing the four screws on the bottom panel). 10. Pad: Reduces input level by 15 dB. Getting Started 1. Read and understand the included "Important Safety Instructions." 2. Make all initial connections with the power switches OFF on all equipment. Make sure the Volume and Drive controls are all the way down. 3. Insert 9V battery or connect optional AC/DC power supply. The Scrambler Bass Overdrive may accept the appropriate voltage as indicated on the rear panel. 4. Connect an instrument to the Input jack with a (shielded) 1/4" instrument cable. 5. While playing the instrument, adjust the Volume knob to the preferred level. 6. Adjust the knobs to taste. Technical Specifications Signal-to-Noise Ratio (50 Hz @ 300mV RMS) Maximum Gain >85 dB +18 dB Power Requirements Size (H x W x D) Weight Internal: 9V Battery External: 9V DC, 20mA 2.2 x 2.6 x 4.5 in 56 x 66 x 114 mm 0.6 lb / 0.3 kg All specifications subject to change WARRANTY AND SUPPORT Visit WWW.AMPEG.COM to... (1) ...identify WARRANTY coverage provided in your local market. Please keep your sales receipt in a safe place. (2) ...retrieve a full version, printable OWNER'S MANUAL (English only) for your product. (3) ...REGISTER your product. (4) ...CONTACT Technical Support, or call 818-575-3600. www.ampeg.com Yamaha Guitar Group, Inc. 26580 Agoura Road, Calabasas, CA 91302-1921 USA Part No. 40-00-0532 Rev. A © 2019 Yamaha Guitar Group, Inc. All rights reserved. Ampeg and the Ampeg logo are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.