Dokiman

GCBIG
MD026 True Wireless Earbuds User Guide 
Vrè ekouteur stereo san filGCBIG MD026 True Wireless Earbuds -

Pwodwi sa

GCBIG MD026 True Wireless Earbuds - 1

pwodwi Specification

Bluetooth Version: 5.3
Sipò: HSP / HFP / A2DP / AVRCP
Chaje Port: Kalite-C
Battery capacity: Earbuds:25mAh
Battery life: 5 hours of use per full charge (actual battery life varies with song type and volume requirements)
Charging time: 1 hour for earbuds / 1 hour for charging case
Transmission range: 15 meters (without obstacles)

entwodiksyon

GCBIG MD026 True Wireless Earbuds - 2

Kouman pou mwen marye de kas ekoutè ak telefòn mwen an?

  • Tanpri asire w ke tou de ekoutè yo ak ka chaje a yo konplètman chaje anvan premye itilize.
  • etap 1
    Take both earbuds out of the charging case and both earbuds will power on and start pairing automatically (If the earbuds are not connected to your device for more than 5 minutes, the earbuds will automatically turn off Press the MPS button for about 3 seconds to manually turn on the earbuds when prompted “Power on”.) The indicator light of one earbud will flash red and blue alternately, and the indicator light of the other earbud will slowly flash blue when paired successfully.
  • etap 2
    Enable the Bluetooth pairing mode on your phone device, search and select “MD026” to connect. (You should hear a voice prompt “connected” when wearing earbuds).
  • Si limyè endikatè ekoutè a etenn, sa vle di telefòn nan konekte
  • Automatic connection By default, the earbuds will connect to the last paired mobile automatically when powered on.GCBIG MD026 True Wireless Earbuds - 3
  • Èd Memwa
  1. Si w gen nenpòt pwoblèm pou asosye de ekoutè yo ak telefòn ou, mete ekoutè yo tounen nan ka chaje a epi repete etap ki anwo yo.
  2. These earbuds can be used not only together, but also individually
    Si ou vle sèvi ak yon sèl ekoutè
    Just take one earbud out of the case and connect it to your phone. or when using two earbuds, manually turn off one earbud or put one back in the charging case and you’ll be able to use the other earbud alone.

Fonksyon

  • Telefon kominikasyon  GCBIG MD026 True Wireless Earbuds - 4

Answer call: Tap once
Hang up: Press and hold the key for 2s
Refuse incoming calls: Press and hold the key for 2s

  • Pou Mizik GCBIG MD026 True Wireless Earbuds - 5
Jwe / pran yon poz Tape de fwa
Track anvan yo Peze epi kenbe "L" pou 2s
Next tras Press and hold “R” for 2s
Aktive Siri Tape rapid twa fwa
Vire desann volim la Yon sèl tape sou ekoutè gòch la
Vire volim Yon sèl tape sou ekoutè dwat la

Pote plent-

  • Ekouteur Chaje
    The earbuds will only be charged when you correctly place them in the charging slots and close the lid. (You can charge the charging case and the earbuds at the same time, or you can charge the charging case first and then the earbuds.)
    Ka chaje a ap sispann chaje otomatikman epi limyè endikatè ki sou ekoutè yo ap etenn lè konplètman chaje.
    Lè ekoutè yo ap chaje nan ka chaje a, ba ekspozisyon dijital ka a ap kontinye clignote epi etenn apre 60 segonn.
  • Ka chaje
    There is a Type-C usb charging cable in the package, please use it to charge the case directly. During charging, the digital display will flash and display the battery level in real-time. When fully charged, the number shows 100.

GCBIG MD026 True Wireless Earbuds - 6

Alèt chaje GCBIG MD026 True Wireless Earbuds - 7

  • Apre w fin itilize li pou yon peryòd tan long, akòz oksidasyon konektè leman an, ekoutè yo pa ka chaje oswa menm limen. Ou ka rezoud pwoblèm sa a lè w netwaye konektè leman yo sou ekoutè yo ak ka chaje ak yon ti sèvyèt alkòl.
  • Put the earbuds in the charging case, and the earbuds will turn off immediately and the charging case will start charging automatically. The earbuds will connect to the last paired mobile automatically.

Depo ak Antretyen

  • If the earbuds have not been used for more than 3 months, we recommend that you charge them.
  • Tanpri itilize yon chajè ki apwouve pa FCC FFC: (Komisyon Federal Kominikasyon).
  • Pa demonte ekoutè yo.
  • Timoun ki gen laj 12 an oswa mwens bezwen sipèvizyon adilt.
  • Pa ekspoze ekoutè yo nan tanperati ki wo oswa ba, epi pa sèvi ak ekoutè yo pandan yon tanpèt loraj.
  • Evite tonbe gratis oswa chòk vyolan nan aparèy la. Kenbe aparèy la lwen sous dife epi pa mete aparèy la nan dlo.

Kesyon moun poze souvan

Q: Why don’t these earbuds pair with my phone?
A: Make sure the earbuds are fully charged and powered on. Make sure your phone’s Bluetooth is enabled If there is no problem with the two points stated above, turn off the powered-on earbuds after 5 continuous and quick clicks. Put them back into the charging case and close the lip, wait for 1 minute, then open the charging case and reconnect the earbuds to the phone.
Q: Why does the music cut in or out?
A: Premyèman, kenbe ekoutè yo pa plis pase 49 pye lwen telefòn ou (pa gen obstak). Si distans la mwens pase 49 pye, swiv etap sa yo:

  1. Put the earbuds back into the case and close the lid, manually click “forget the MD026” on your phone
  2. Apre 10 segonn, louvri ka chaje a epi rekonekte ekoutè sa yo ak telefòn ou

Q: Why do the earbuds still won’t be charged or disconnected from the phone after I put them in the case and close the lid?
A: Make sure the charging case is not in a low battery state. If the charging case is in a low battery state, the earbuds will neither be charged nor disconnected. In this case, please use a type-c charging cable to fully charge the case.
Q: Are these earbuds sweat- and water-resistant?
A: These earbuds are sweatproof and slightly waterproof. For electronic devices, we do not recommend that you submerge the earbuds in water.
Pou plis detay FAQ pwodwi, tanpri kontakte sèvis kliyan nou an.

Aktivasyon & Garanti

Permanent replacement of damaged, defective, upgraded, or missing items (no need to return the original)
Please activate via email below within 15 days. ” [imèl pwoteje]"

Dokiman / Resous

GCBIG MD026 True Wireless Earbuds [pdf] Gid itilizatè
MD026 True Wireless Earbuds, MD026, True Wireless Earbuds

Rantre nan konvèsasyon an

1 Kòmantè

  1. How can I unpair from Device A to pair to Device B without having to open Device A and have it unpair from my MD026s? Sometimes I have to go outside with Device B to pair to my MD026 earbuds. It gets tedious to change from one device to another. Thank you.

Kite yon kòmantè

Adrès imèl ou pa pral dwe pibliye.