RAINPOINT ITP138 Compact Programmable Solar Automatic Plant Waterer Kit

Entwodiksyon

Thank you for choosing the RAINPOINT ITP138 Compact Programmable Solar Automatic Plant Waterer Kit. This system is designed to provide efficient and consistent watering for your plants, whether they are located indoors or outdoors. With its solar-powered operation and programmable settings, you can ensure your plants remain hydrated without constant manual intervention, making it ideal for daily use or during extended absences.

This manual will guide you through the installation, operation, and maintenance of your new watering system. Please read all instructions carefully before use to ensure optimal performance and longevity of the product.

Ki sa ki nan bwat la

Your RAINPOINT ITP138 kit includes the following components:

• 1 x Solar Irrigation Pump (Main Unit)
• 1 x Drip Irrigation Accessories Kit, including:
• Anti-Siphon Valv
• 10 x Micro Drip Emitters
• 1/6'' Main Line Tubing
• 1/8'' Branch Line Tubing
• 10 x T Barb Fittings
• 10 x lyen zip
• Pye tè
• USB-C Charging Cable (for backup charging)

Note: The standard kit includes accessories for 10 pots. Expansion kits can be purchased separately to extend coverage for up to 20 plants.

Enstriksyon Enstalasyon

Follow these steps to set up your RAINPOINT ITP138 watering system:

1. Prepare Sous Dlo a: Place a bucket or container of water near your plants. Ensure the container is stable and can hold enough water for your desired watering duration.

   

2. Enstale filtè a: Attach the filter to one end of the 1/6'' main line tubing. Submerge the filter end into your water source. This prevents debris from entering the pump and drip system.

   

3. Connect Tubing to Pump: Connect the other end of the 1/6'' main line tubing to the 'IN' port of the solar irrigation pump. Connect the 1/8'' branch line tubing to the 'OUT' port. Ensure connections are secure to prevent leaks.

   

4. Install Anti-Siphon Valve: Insert the anti-siphon valve into the main line tubing, ensuring the larger end is closer to the pump. This prevents water from flowing back into the reservoir when the pump is off.
5. Route Drip Lines and Emitters: Cut the 1/8'' branch line tubing to desired lengths for each plant. Use the T barb fittings to create branches from the main line. Attach a micro drip emitter to the end of each branch line and insert it into the soil near the base of each plant. Use zip ties to secure tubing as needed.
6. Pozisyon panèl solè a: Mount the solar irrigation pump using the provided ground stake. Adjust the solar panel to face direct sunlight for optimal charging. The panel is 360° adjustable.

   

7. Prime the Pump (if necessary): If the pump does not start pumping water immediately, use the included small pipette to add water into the 'IN' port to wet the diaphragm and prime the pump.

Enstriksyon Operasyon

The RAINPOINT ITP138 features easy-to-use dial programming for automated watering and a manual watering option.

1. Setting the Automatic Watering Schedule

• 'How Often' Dial: Turn the left dial to select the frequency of watering. Options range from every 8 hours to every 30 days. Select 'ONCE' for a single watering cycle or 'OFF' to disable automatic watering.
• 'How Long' Dial: Turn the right dial to set the duration of each watering cycle. Options range from 10 seconds to 20 minutes. Select 'OFF' to disable watering duration.
• The system will automatically begin watering according to your selected schedule.

2. Awozaj Manyèl

• To initiate a temporary watering cycle without affecting your preset schedule, press the manual button (indicated by a hand icon) on the control panel. The pump will run for the duration set on the 'How Long' dial.

3. Pouvwa ak Endikatè

• The solar panel charges the internal rechargeable lithium battery. Ensure the panel receives adequate sunlight.
• A low battery indicator will alert you when the battery needs charging. You can also charge the unit via the USB-C port using the provided cable.
• A low water auto shut-off feature protects the pump from running dry.

Antretyen

• Netwaye filtè a: Regularly check and clean the water filter to prevent blockages and ensure consistent water flow. Remove any debris or sediment.
• Check Tubing and Emitters: Periodically inspect all tubing and emitters for kinks, blockages, or damage. Ensure emitters are securely placed in the soil and delivering water effectively.
• Netwayaj Panèl Solè: Keep the solar panel clean from dust, dirt, and leaves to maximize sunlight absorption and charging efficiency. Wipe it gently with a soft, damp twal.
• Swen batri: Recharge the internal battery promptly when the low battery indicator appears to maintain optimal performance and battery lifespan. If storing for an extended period, ensure the battery is fully charged.
• Depo ivè: In colder climates, drain all water from the system and store the pump and tubing indoors to prevent freezing and damage.

Depanaj

Espesifikasyon

Garanti ak sipò

For warranty information, technical support, or to purchase additional accessories, please refer to the contact details provided in your product packaging or visit the official RAINPOINT websit. Kenbe resi acha ou pou reklamasyon garanti.