Electight 14 LEDs Motion Sensor Light Indoor

Entwodiksyon

Thank you for choosing the Electight 14 LEDs Motion Sensor Light. This product is designed to provide convenient, energy-efficient lighting for various indoor spaces. Featuring advanced motion sensing technology, multiple operating modes, and a rechargeable battery, it offers a versatile lighting solution for your home. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.

Enfòmasyon sou Sekirite

• Pa demonte oswa modifye limyè a.
• Keep away from water and high humidity environments. This product is for indoor use only and is not waterproof.
• Avoid direct exposure to strong light sources, which may interfere with the motion sensor.
• Pa ekspoze a tanperati ekstrèm.
• Use only the provided USB charging cables for recharging.
• Kenbe soti nan atenn timoun yo.

Ki sa ki nan bwat la

Pake ou a ta dwe genyen atik sa yo:

• 3 x Motion Sensor Lights Indoor
• 3 x USB Chaje Câbles
• 3 x Magnetic Sheets
• 3 x Fè dra

Image: Package contents including lights, cables, and mounting accessories.

Pwodwi souview

The Electight Motion Sensor Light features 14 high-quality LED beads for soft, flicker-free illumination. Its compact and round design (3.26"D x 3.26"W x 0.78"H) makes it suitable for various indoor applications.

Karakteristik kle:

• Eye Protection Night Light: 14 LED beads provide soft, glare-free warm white light (3000 Kelvin).
• Auto Motion Sensor & 3 Modes: Adjustable ON/AUTO/OFF modes. In AUTO mode, it detects motion within 120° and 9.8 ft (3m) and turns off after 15 seconds of no motion.
• Rechargeable & Long Battery Life: Built-in high-capacity battery, rechargeable via USB-C. Lasts over 90 days in AUTO mode or 8-12 hours in ON mode on a full charge.
• Lejè & pòtab: Easy magnetic installation without additional tools.

Image: Key features of the motion sensor light.

Image: Product dimensions and mode switch explanation.

Enstalasyon

The Electight Motion Sensor Light features a simple magnetic installation method, requiring no drilling or complex tools.

Magnetic Installation Method:

1. Attach the small circular magnet to the center of the night light's back.
2. Remove the blue protective film from the iron sheet.
3. Paste the iron sheet firmly onto the desired clean, dry surface where you need lighting.
4. Attach the night light (with the magnet attached) to the iron sheet. The light will securely hold in place magnetically.

Image: Step-by-step magnetic installation guide.

For a visual guide on installation, please watch the video below:

Enstriksyon Operasyon

The light features a simple slide switch to select between three operating modes:

• Mòd ON: The light remains continuously on. Use this mode for constant illumination, such as an emergency light.
• Mòd OTO: The light activates automatically when motion is detected in dark conditions. It will turn off approximately 15 seconds after no motion is detected. This mode is ideal for energy saving and hands-free operation in areas like hallways, closets, or stairs.
• Mòd OFF: The light is completely off.

Image: Motion sensing range and auto-off function.

See the motion sensor in action:

Chaje

The Electight Motion Sensor Light is equipped with a built-in rechargeable Lithium Polymer battery. To charge the device:

1. Jwenn pò chaje USB-C a sou bò limyè a.
2. Connect one end of the provided USB charging cable to the light and the other end to a USB power source (e.g., computer, power bank, USB wall adapter).
3. A red indicator light will illuminate while charging. The light will turn off when the battery is fully charged.

A full charge typically takes approximately 2 hours. The light can last for over 90 days in AUTO mode or 8 to 12 hours in continuous ON mode, depending on usage frequency.

Image: Charging indicator status.

Antretyen

To ensure optimal performance and longevity of your Electight Motion Sensor Light:

• Netwayaj: Wipe the light gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Depo: If storing for an extended period, charge the battery fully and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
• Swen Capteur: Keep the motion sensor lens clean and free from obstructions to ensure accurate detection.

Depanaj

Espesifikasyon

Garanti ak sipò

Electight products are manufactured to high-quality standards. For any product-related inquiries, technical support, or warranty claims, please contact Electight customer service through the retailer's platform or the official brand websit la. Tanpri konsève prèv acha ou a pou rezon garanti.