Flieks Twin Over Twin Bunk Bed with 2 Drawers and Multi-Layer Cabinet, Grey - Instruction Manual

1. Entwodiksyon

This manual provides detailed instructions for the assembly, operation, and maintenance of your Flieks Twin Over Twin Bunk Bed with 2 Drawers and Multi-Layer Cabinet. Please read all instructions carefully before assembly and use to ensure safe and proper operation.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Si w pa suiv avètisman sa yo, sa ka lakòz blesi grav.

• Always use the recommended mattress size and thickness. For the upper bunk, the mattress should not exceed 6 inches in thickness.
• Ensure all connections are tight before use. Periodically check and tighten all fasteners.
• Kabann anwo a pa apwopriye pou timoun ki poko gen 6 an.
• Pa kite plis pase yon moun sou etaj anwo a.
• Do not attach or hang items on any part of the bunk bed that are not designed for use with the bed.
• Toujou sèvi ak nechèl la pou antre ak soti nan kabann ki anlè a.
• The maximum weight capacity for both upper and lower bunks is 220 lbs (100 kg).
• Kenbe enstriksyon sa yo pou referans nan lavni.

3. Pake kontni

Your Flieks Bunk Bed is delivered in two packages. Please ensure all parts are present before beginning assembly. Refer to the included hardware list and assembly diagram for specific component identification.

Imaj 3.1: Eksploze view showing all components and hardware for the bunk bed, including bed frames, ladder, drawers, and multi-layer cabinet sections.

If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

4. Enstalasyon ak Asanble

Assembly is required for this bunk bed. It is recommended that two adults assemble the bed. Please follow the step-by-step instructions provided in the separate assembly manual included in your package. Ensure you have sufficient space for assembly.

Etap kle pou asanblaj la:

1. Depake tout konpozan yo epi verifye yo avèk lis pyès yo.
2. Assemble the lower bunk frame first, ensuring all connections are secure.
3. Attach the upper bunk frame to the lower structure, carefully aligning all connection points.
4. Install the ladder and ensure it is firmly attached to the bunk bed frame.
5. Assemble the two drawers and the multi-layer cabinet. Integrate them into the bed structure as per the assembly manual.
6. Insert the wooden slats into both upper and lower bunk frames.
7. Once fully assembled, double-check all bolts, screws, and fasteners to ensure they are tight and secure.

Imaj 4.1: Devan view of the fully assembled bunk bed, showing the upper and lower bunks, two storage drawers, and the integrated multi-layer cabinet.

Imaj 4.2: Kote view of the bunk bed, highlighting the integrated ladder for the upper bunk and the multi-layer storage cabinet.

5. Operasyon Enstriksyon

• Plasman Matla: Place a standard twin-size mattress on both the upper and lower bunks. Ensure the upper bunk mattress does not exceed 6 inches in thickness to maintain guardrail safety.
• Kapasite pwa: The maximum weight capacity for both the upper and lower bunks is 220 lbs (100 kg). Do not exceed this limit.
• Itilizasyon tiwa: The two integrated drawers can be used for storing clothes, bedding, or other items. Ensure they slide smoothly and are not overloaded.
• Itilizasyon Kabinè: The multi-layer cabinet provides additional storage space. Distribute weight evenly across shelves.
• Itilizasyon Eskalye: Always use the provided ladder to access the upper bunk. Do not jump on or off the bunk bed.

6. Antretyen

• Netwayaj: Siye ankadreman kabann lan avèk yon twal mou.amp twal. Evite pwodui chimik ki agresif oswa pwodui netwayaj abrazif ki ka domaje fini an.
• Verifikasyon Fastener: Periodically (e.g., every 3 months) check all bolts, screws, and fasteners to ensure they remain tight. Re-tighten if necessary to maintain structural integrity and safety.
• Planch: Ensure all wooden slats are properly seated and undamaged. Replace any broken slats immediately.
• Drawers and Cabinet: Keep drawer slides clean and free of debris for smooth operation.

NAN. Depanaj

Bed feels wobbly or unstable:

Check all assembly bolts and screws. Tighten any loose fasteners. Ensure the bed is on a level surface.

Tiwa yo pa glise fasilman:

Check for obstructions in the drawer slides. Ensure the drawers are assembled correctly and not overloaded. Clean the slides if necessary.

Bri k ap kriye:

Identify the source of the squeak. Often, tightening loose bolts or applying a small amount of lubricant to metal-on-metal contact points can resolve this. Ensure slats are properly seated.

8. Espesifikasyon

Image 8.1: Dimensional drawing of the bunk bed, including overall length, width, height, and specific measurements for the drawers and multi-layer cabinet.

9. Garanti ak sipò

For warranty information or technical support, please refer to the documentation included with your purchase or contact Flieks customer service directly. Keep your purchase receipt for warranty claims.