Flieks WF311379AAK-MZJ
Flieks Solid Wood Veneer Cabinet - Model WF311379AAK-MZJ Instruction Manual
1. Entwodiksyon
Thank you for choosing the Flieks Solid Wood Veneer Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new cabinet. Please read these instructions thoroughly before beginning assembly and retain them for future reference.
2. Enfòmasyon sou Sekirite
Enstriksyon enpòtan pou sekirite:
- Toujou rasanble kabinèt la sou yon sifas mou epi pwòp pou evite reyur.
- Asire w tout pyès yo byen fikse anvan w itilize yo. Pa sere vis yo twòp.
- Pa kite timoun yo monte sou kabinè a oswa jwe ak li.
- Distribute weight evenly across shelves and the top surface to prevent tipping. The table top has a weight capacity of 220 lbs.
- If an anti-tip kit is included, it is highly recommended to install it to secure the cabinet to a wall, especially in homes with children or pets.
- Kenbe ti pyès ak materyèl anbalaj lwen timoun yo.
3. Pake kontni
Before assembly, verify that all components and hardware are present and undamaged. Refer to the included parts list in your packaging. All hardware accessories and parts are labeled for easy identification.
Kontni tipik yo enkli:
- Panno kabinèt (anwo, anba, kote, dèyè, pòt)
- Etajè reglabl
- Janm
- Manch pòt yo
- Assembly hardware (screws, dowels, hinges, shelf pins, etc.)
- Assembly tools (if provided, e.g., Allen wrench)
4. Enstalasyon ak Asanble
This cabinet requires assembly. Follow the detailed, step-by-step instructions provided in the separate assembly guide included in your package. Ensure you have adequate space and the necessary tools before starting.
- Dekonpoze: Ak anpil atansyon retire tout eleman nan anbalaj la.
- Idantifye pati yo: Match each part to the corresponding label in the assembly guide.
- Rasanble ankadreman: Connect the main cabinet panels according to the instructions.
- Tache janm yo: Secure the pine legs to the base of the cabinet.
- Enstale Pòt: Attach the three fir doors using the provided hinges.
- Enstale Manch yo: Fasten the metal door handles.
- Mete etajè yo: Place the adjustable shelves at your desired height.
- Tcheke final la: Asire w tout koneksyon yo sere epi kabinè a stab.

Imaj: Anglè devan view of the assembled Flieks Solid Wood Veneer Cabinet, showcasing its three doors and overall design.
5. Operasyon Enstriksyon
Your Flieks cabinet is designed for versatile storage in various rooms such as studies, corridors, or entrances.
- Ouvèti/Fèmen Pòt: Gently pull or push the metal handles to open and close the three cabinet doors.
- Ajiste etajè: The cabinet features three adjustable shelves. To change a shelf's height, remove all items from the shelf, lift the shelf, and reposition the shelf pins to the desired slots. Ensure all four shelf pins are securely in place before placing items back on the shelf.
- Distribisyon pwa: For stability and longevity, distribute items evenly across the shelves and the cabinet top. Do not exceed the top surface weight capacity of 220 lbs.

Imaj: Enteryè view of the Flieks cabinet with its three doors open, revealing the adjustable shelves inside for customizable storage.
6. Swen ak Antretyen
Proper care will help maintain the appearance and longevity of your Flieks cabinet.
- Netwayaj: Wipe the cabinet surfaces with a soft, dry cloth. Avoid abrasive cleaners, harsh chemicals, or excessive moisture, which can damage the wood veneer and finish.
- Devèsman: Immediately wipe up any spills with a dry cloth to prevent staining or damage.
- Limyè solèy la: Evite ekspoze a limyè solèy dirèk pou yon tan ki long, sa ka lakòz li pèdi koulè oswa pèdi koulè.
- Chalè ak Imidite: Keep the cabinet away from direct heat sources and areas with extreme humidity fluctuations to prevent warping or cracking.
- Materyèl: Tcheke tout vis ak eleman fikse yo detanzantan pou asire yo rete byen sere. Sere yo ankò si sa nesesè.
NAN. Depanaj
Si ou rankontre pwoblèm ak kabinèt ou a, gade solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Kabinèt la ap tranble oswa li pa estab. | Klou ki lach; planche inegal. | Ensure all screws are tightened. Adjust leg levelers if present, or place shims under legs on an uneven floor. |
| Pòt yo pa fèmen byen oswa yo pa byen aliyen. | Gon yo lach oswa yo pa byen ajiste. | Check and tighten hinge screws. Adjust hinge mechanisms if they offer adjustment options (refer to hinge manufacturer's instructions if needed). |
| Etajè yo pa nivo. | Shelf pins are not inserted correctly or are in different height slots. | Ensure all four shelf pins are fully inserted into corresponding slots at the same height. |
| Scratches or minor damage to the finish. | Enpak aksidantèl oswa fwotman. | For minor scratches, a wood repair kit or furniture marker matching the finish color may be used. Consult a professional for significant damage. |
8. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | Flieks |
| Nimewo Modèl | WF311379AAK-MZJ |
| Dimansyon jeneral (L x W x H) | 47.2'' x 15.7'' x 31.5'' |
| Materyèl Tablo | MDF |
| Materyèl ankadreman | MDF + Fir |
| Cabinet Door Material | MDF + Fir |
| Legs Material | Pine |
| Door Handle Material | Metal |
| Cabinet Texture | Fraxinus mandschuric |
| Table Top Weight Capacity | 220 liv |
| Etajè reglabl | Yes, 3 shelves |
| Asanble obligatwa | Wi |
| UPC | 195358408834 |

Image: Diagram showing the dimensions of the Flieks cabinet, indicating a width of 52.17 inches, a height of 19.49 inches, and a depth of 9.84 inches.
9. Garanti ak sipò
For warranty information or if you require assistance with your Flieks cabinet, please refer to the warranty card included in your packaging or contact Flieks customer support through the retailer's platform or the official Flieks website. Please have your model number (WF311379AAK-MZJ) and purchase details ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.