Hyperice Hypervolt Heated Head Attachment User Manual

1. Entwodiksyon

The Hyperice Hypervolt Heated Head Attachment is designed to enhance your percussion massage experience. This attachment is compatible with all Hypervolt models and helps to relax tight muscles and maintain range of motion by combining heat with percussion therapy.

Image 1.1: The Hyperice Hypervolt Heated Head Attachment.

2. Enfòmasyon sou Sekirite

Please read all safety warnings and instructions before using this product. Failure to follow these instructions may result in injury or damage to the device.

• Sèvi ak sèlman jan yo dirije.
• Do not use on open wounds or broken skin.
• Consult a physician before use if you have a medical condition or are taking any medications.
• Stop use if you experience pain or discomfort.
• Kenbe soti nan atenn timoun yo. Pwodui sa a pa fèt pou timoun yo itilize.
• Pa itilize pandan w ap dòmi oswa nan basen an.
• Deploge aparèy la lè li pa itilize.
• Pa sèvi ak yon fil elektrik oswa yon ploge ki domaje.
• Do not submerge in water or expose to rain or wet conditions.
• Do not use with oils, lotions, or creams.
• Do not exceed the recommended massage time without a break.
• This product is not a substitute for professional medical care.

Image 2.1: Regulatory markings on the base of the attachment.

3. Sa ki enkli

Your Hyperice Hypervolt Heated Head Attachment package includes:

• One (1) Hyperice Hypervolt Heated Head Attachment
• One (1) USB-C Charging Cable

Image 3.1: Contents of the package: Heated Head Attachment and USB-C cable.

4. Enstalasyon ak Chaje

4.1 Attaching to Your Hypervolt Device

1. Ensure your Hypervolt massager is powered off and compatible with the Heated Head Attachment.
2. Gently push and twist the Heated Head Attachment onto the Hypervolt massager's head slot until securely seated.

Image 4.1: The Heated Head Attachment being connected to a Hypervolt device.

4.2 Charging the Heated Head Attachment

The Heated Head Attachment has an internal battery that powers its heating function. Charge the attachment using the provided USB-C cable.

• Connect the USB-C cable to the charging port on the Heated Head Attachment.
• Konekte lòt bout kab USB-C a nan yon adaptè kouran USB konpatib (pa enkli).
• A full charge provides approximately 75 minutes of heated operation.

Image 4.2: The Heated Head Attachment with its USB-C charging cable.

5. Operasyon Enstriksyon

Once the Heated Head Attachment is securely attached and charged, you can begin your heated percussion massage.

1. Power on your Hypervolt massager.
2. Press the single button on the Heated Head Attachment to cycle through the three heat levels:
   • Nivo 1: 109 ° F (43 ° C)
   • Nivo 2: 115 ° F (46 ° C)
   • Nivo 3: 120 ° F (49 ° C)
3. Apply the massager with the Heated Head Attachment to your desired muscle group for relaxation, pain relief, and increased blood flow.
4. To turn off the heat, cycle through the heat levels until the indicator lights are off, or power off the Hypervolt device.

Image 5.1: Using the Heated Head Attachment for neck massage.

Image 5.2: Applying the Heated Head Attachment to a thigh muscle.

6. Antretyen

To ensure the longevity and optimal performance of your Heated Head Attachment, follow these maintenance guidelines:

• Netwayaj: Siye atachman an ak anonsamp cloth after each use. Do not use harsh chemicals or abrasive cleaners. Ensure the device is completely dry before storing or recharging.
• Depo: Store the attachment in a cool, dry place away from direct sunlight and extreme temperatures.
• Swen batri: Pou pi bon dire batri a, evite dechaje batri a nèt souvan. Chaje aparèy la regilyèman, menm si ou pa itilize li pandan yon bon bout tan.

NAN. Depanaj

If you encounter any issues with your Hyperice Hypervolt Heated Head Attachment, consider the following:

• Pa gen chalè: Ensure the attachment is fully charged. Verify that the heat setting is activated by pressing the button.
• Attachment Not Secure: Re-attach the head, ensuring it is pushed and twisted firmly into place on your Hypervolt device.
• Pwoblèm chaj: Check the USB-C cable for damage and ensure it is properly connected to both the attachment and a working power source.

For further assistance, please contact Hyperice customer support.

8. Espesifikasyon

Imaj 8.1: Detaye view of the Heated Head Attachment.

9. Garanti ak sipò

For warranty information and customer support, please visit the official Hyperice websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe prèv acha ou pou reklamasyon garanti.

Manifakti: Hyperice

Websit: www.hyperice.com