01 Package List
- Host*1
- LivePods*2
- Dual Type-C Charging Cable*1
- User Manual*1
- Silicone Ear Tips*2
- Free Gift: Type-C To Lightning Converter*1
- Free Gift: Type-C To USB Converter*1
Product Introduction
Host Components:
- 1. Mode Switch Button
- 2. Microphone (Built-in Component)
- 3. Host Volume Button
- 4. Host Volume Button
- 5. Host volume Indicator Light
- 6. Host volume Indicator Light
- 7. Type-C Charging Port
LivePods Components:
- 1. LivePods light indicator light
- 2. Secondary microphone for LivePods
- 3. Main Microphone for the LivePods
- 4. Silicone Ear Tips
- 5. Charging Pin
- 6. Touch Control Area
02 Bluetooth Connect
Power On: When you open the host case, the LivePods will power on automatically.
Power Off: When you put the LivePods into the host and close the case, the LivePods will power off automatically.
Bluetooth Connection: Turn on your Bluetooth in settings, search for the available device, and click "ThriveAudio S1" to pair it.
Switch to "TWS Mode": If the host is in "Show Mode" (the indicator light of the host keeps green), press the main button for 2 seconds. S1 will switch to "TWS Mode" (the indicator light of the host turns off).
Note: When using the left or right LivePods individually, volume adjustment via LivePods touch control is not supported.
03 "TWS MODE" Touch Control Instructions
| Operation | Feature |
|---|---|
| One Click L or R | Music: Play/Pause Call: Answer |
| Double Click L or R | Music: Next track Call: Reject/End |
| Triple Click L or R | Music: Volume down |
| Long-press L (3s) | Music: Previous track |
| Long-press R (3s) | Music: Volume up |
Note: When using the left or right LivePods individually, volume adjustment via LivePods touch control is not supported.
04 Show Mode
How to Switch to "Show Mode": If in "TWS Mode", press the host main button for 2 seconds. The host will switch to "Show Mode" (the host indicator light will stay green).
Note: If LivePods prompts "Show Mode" after switching, but the host indicator light is flashing green, it means the connection between the LivePods and the host fails. Please put both LivePods back into the host and keep the host case open, then long-press the host volume for 5 seconds. The host indicator light will flash between orange and green. Once pairing is successful, the green light will remain on.
05 Show Mode Control Instructions
| Operation | Feature |
|---|---|
| Long press for 2 seconds | Mode switch |
| Single Click | Microphone input volume increase (Max volume level is 10, prompts 'beep' at level 10) |
| Single Click | Microphone input volume decrease (Min volume level is 0, prompts 'beep' at level 0) |
| Long press both for 2 seconds | In-ear monitoring on/off |
Note: The host will automatically switch back to TWS Mode when the battery of the host is below 15%.
Note: There’s a noise canceling algorithm inside the host; please increase the volume of the host if there’s noise around you. The bigger the volume, the stronger the noise canceling will be.
Clear Bluetooth pairing information: In "TWS Mode", place both LivePods back into the host, then long-press the host volume for 5 seconds while the cover is open. The host indicator light will flash alternately between orange and green. Once pairing is cleared, the indicator light will turn off.
In-ear monitoring status:
- Indicator lights keep orange: In-ear monitoring off
- Indicator lights keep green: In-ear monitoring on
06 How to Use S1 in Show Mode?
6.1 Singing/Practice Singing & Karaoke Scenario
Sing for Fun: If you enjoy singing, no need to save your songs. Use them wirelessly. The host acts as a professional HD microphone, audio interface, and in-ear monitoring system.
Diagram Description: Shows wireless connection to a device playing music. The host functions as a microphone and audio interface, providing in-ear monitoring.
Sing for Sharing (Recommended): To save and share your songs, connect the host to your phone with a cable. This ensures accompanying music and your voice are combined for playback.
Diagram Description: Shows the host connected via cable to a phone/PC for recording. Accompanying music is played from another source (e.g., LivePods/Bluetooth), and the host captures both music and voice for a combined output.
6.2 Recording the song/recitation | Vlog Recording
Recording the Singing/Reciting without Accompanying Music: Connect the host to your phone/PC with a cable. Use the host as the microphone and start recording. Save your work on your phone/PC.
Diagram Description: Shows the host connected via cable to a phone/PC, used as a microphone for direct recording.
Recording the Singing/Reciting with Accompanying Music:
- Pair the LivePods with phone/PC/tablet A to play accompanying music.
- Connect the host via cable to phone/PC/tablet B where the recording will be saved.
- Hold the host as the microphone. Click the recording start button on device B, play accompanying music on device A, and begin singing or reciting.
Diagram Description: Shows LivePods paired to Device A for music playback. The host is connected via cable to Device B for recording. The host captures voice and accompanying music from A, mixing them for recording on B.
6.3 Live-streaming
Live-streaming without Accompanying Music: Connect the host to your smartphone/PC with the cable. Use the host as your microphone, open the live-streaming app, and start your live-stream.
Diagram Description: Shows the host connected via cable to a smartphone/PC, used as a microphone for live-streaming.
Live-streaming with Accompanying Music:
- Pair the LivePods with phone/PC/tablet A to play the accompanying music.
- Connect the host via cable to live-streaming phone/PC/tablet B.
- Use the host as the microphone, open the live-streaming app, and start live-streaming on B.
- Control the accompanying music playback (PLAY/PAUSE) on device A. Your voice and accompanying music will be pushed into the live-streaming platform together.
Diagram Description: Shows LivePods paired to Device A for music. The host is connected via cable to Device B for live-streaming. The host captures voice and accompanying music from A, mixing them for the live-stream on B.
Product Light Display Explanation:
Host Light Display:
- Green light flashing simultaneously: The host is not paired with the LivePods.
- Indicator lights keep green: The host is paired with the LivePods.
- Green light is constantly on: Sufficient battery.
- Orange light is flashing simultaneously: Low battery.
- Orange light is flashing alternately at a slow pace: Charging.
- Green light is flashing alternately at a slow pace: Fully charged.
LivePods Light Display:
- Steady on for 1 second: Power On/Off.
- One LivePod is flashing quickly while the other is flashing slowly: Bluetooth Disconnected.
- Both LivePods synchronize to flash once every 5 seconds: Bluetooth Connected.
Note: "Show Mode" prioritizes displaying the mode indicator light.
07 Specification
| Category | Details |
|---|---|
| Brand | ThriveAudio |
| Product Name | Mobile Studio S1 Wireless IEMs LivePods |
| Model | S1 |
| LivePods Battery Capacity | 50mAh |
| LivePods Input | DC5V=110mA |
| LivePods Charging Time | 45mins |
| Host Battery Capacity | 650mAh |
| Host Input | DC5V=750mA |
| Host Charging Time | 60mins |
| LivePods Period in TWS Mode (per full charge) | 3.5-4 Hours |
| LivePods Period in TWS Mode (with Charging Case) | 14-16 Hours |
| LivePods Period in Show Mode (per time) | 3.5 Hours |
| LivePods Period in Show Mode (with Charging Case) | 6-7 Hours |
| Microphone Type | ECM Capacitive Microphone |
| Microphone Frequency Range | 20Hz-20kHz |
| Microphone Sensitivity | -39±1dB |
| Microphone Operating Frequency | 2.400-2.4835GHz |
| Microphone Distortion | ≤0.1% |
| Microphone Equivalent Isotropically Radiated Power (EIRP) | <20dBm |
| Microphone Frequency Response | 100Hz-20kHz |
| Audio Interface Chip | BAJIN A1 |
| Audio Interface Latency | 30ms |
| Audio Interface Input Gain | 0-10 levels |
| Audio Interface Sound Effects | Hall Reverb, Space Reverb, Room Reverb, and Original Sound |
| Audio Interface Noise Cancel Levels | 0-5 Levels |
08 Warranty Regulations
- One-year warranty service from the date of product purchase. Free gift accessories are not covered. Free maintenance service is provided for performance failures not caused by human error during normal use.
- Send the product for repair with the packaging box, completed warranty card, and purchase receipt to the designated location for maintenance.
- Consumers cannot enjoy warranty rights in the following situations:
- a. Non-genuine product.
- b. Damage caused by man-made factors (e.g., abnormal usage environments, failure to follow instructions).
- c. Damage caused by force majeure.
Hearing Loss: Prolonged exposure to high volume levels may affect hearing health. It is recommended not to use excessively high volume levels.
Battery Note: Using the wrong type of battery pack may cause safety protection failure. Do not place the battery pack in extremely high-temperature environments; if severe swelling occurs, do not continue to use it.
Charging: Use a charging cable with a power adapter or computer to charge the charging case. It is recommended to place the charging case with the status indicator facing upwards to avoid prolonged contact with high temperatures. When the device is charging, avoid prolonged skin contact with it.
09 FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.