Download - DriveSmarter
Accurate Driver Alert Systems, Drive Smarter! | ESCORT Radar
Contact Us
Owner's Manual for ESCORT models including: MAX 360 MKII Radar and Laser Detector, MAX 360 MKII, Radar and Laser Detector, Laser Detector, Detector
ESCORT MAX 360 MKII Radar Detector - EscortRadar.com
File Info : application/pdf, 14 Pages, 7.37MB
DocumentDocumentMAKE EVERY DRIVE LEGENDARY
Contents
INTRODUCTION..................................................................................................................... 3 MAX 360 MKII FEATURES...................................................................................................... 3 PRODUCT SERVICE AND SUPPORT .................................................................................... 4 WHAT'S IN THE BOX ............................................................................................................. 4 OPTIONAL ACCESSORIES AVAILABLE AT WWW.ESCORTRADAR.COM......................... 4 CONTROLS & FEATURES...................................................................................................... 5 INSTALLATION ....................................................................................................................... 7 DOWNLOAD AND CONNECT TO DRIVE SMARTER® ......................................................... 10 DISPLAY AND MENU ........................................................................................................... 11 UNDERSTANDING YOUR DETECTOR ................................................................................ 12 PROGRAMMING MENU ...................................................................................................... 13 TROUBLESHOOTING .......................................................................................................... 24 TRADEMARKS ACKNOWLEDGEMENT, WARNINGS & REGULATORY INFORMATION.......................................................................................... 25 LIMITED 1-YEAR WARRANTY ............................................................................................. 26
2
Introduction
Congratulations! Your new ESCORT MAX 360 MKII takes the legendary performance of the MAX series to another level, using Ultra DSP (Digital Signal Processing) for exceptional radar detection range and false alert filtering while reporting threat direction information. This booklet describes the simple steps for mounting and setting up your detector. It also provides helpful information about how radar and laser guns are used and how you can interpret the alerts you receive. Please drive safely.
MAX 360 MKII FEATURES
· Exceptional Range - The M13 platform with dual antennas provides 50% improved detection range and sensitivity
· Dramatically Quieter Ride - Outstanding false alert filtering effectively reduces CAS, BSM, and other false radar signals
· AutoLearnTM Intelligence - Intelligent GPS-based software learns your route and rejects repeated false alert locations
· True 360° Awareness - Directional arrows provide true 360° awareness to let you know where you need to pay attention
· Faster Performance - Blackfin® DSP processes radar signals fast so you can react with plenty of time
· Shared Network Alerts - Get advance warning of laser and radar alerts from other connected detectors
· Defender Preloaded with ESCORT's updatable Defender Database, the award-winning location database of verified speed traps, speed cameras and red-light cameras.
· Color OLED Display - Multiple selectable colors to match your vehicle's instrumentation.
· Dual Language - English and Spanish voice and text alerts.
Introduction
PRODUCT SERVICE AND SUPPORT
For any questions about operating or installing this new Escort product, PLEASE CONTACT ESCORT FIRST...do not return this product to the retail store. The contact information for Escort will vary depending on the country in which you purchased and utilize the product. For the latest contact information, please go to www.escortradar.com/support
WHAT'S IN THE BOX
· MAX 360 MKII · SmartCord® USB · EZ Mag MountTM · Carry Case · Quick Start Guide
Drive Smarter®
drivesmarter.com/downloads
3
4
Introduction
CONTROLS & FEATURES
Sensitivity
Mark Volume Current Speed/ Vehicle Voltage Overspeed Setting
EZ Mag MountTM Area Power
Brightness
Volume + Mute
Alert Area 360° Directional Alert Arrows
Over Speed Alert Setting
Bluetooth® is connected Speed Limit data from Drive
to smartphone
Smarter, "--" means no data
is available
SENSITIVITY MODES
The SEN button selects radar sensitivity/range. The choices are:
Highway Full sensitivity.
Auto Reduces X and K band sensitivity based on the speed of the vehicle.
AutoNoX Same as Auto but without X band detection.
AutoLoK Same as Auto but with lowered K band sensitivity at all times.
Speed Limit Data
5
Introduction
Using MAX 360 MKII
Using SmartCord USB
1 Plug small end of SmartCord into modular jack · Mute Button:
on MAX 360 MKII and large end of SmartCord
- Press to mute the audio for a specific alert.
into your car's lighter/accessory socket.
- Press three times to lock out a false alert.
2 MAX 360 MKII should power on automatically. If
not, press the device's PWR button.
- Press twice while receiving a locked-out alert to unlock.
Software Updates
- When connected to the Drive Smarter® app
MAX 360 MKII can be updated using a
press and hold the mute button on unit or
USB A / Micro USB cable and our Detector
cord to manually report to other user
Tools Pro software available on our web site.
a verified X or K-band alert, or police office
Go to EscortRadar.com.
observing traffic.
Importantly note that Defender database updates require first registering MAX 360 MKII to activate the included 90 day Defender subscription. Defender subscriptions are available at EscortRadar.com
· Alert Light: Blinks red when receiving an alert.
· Power Light: Lights green when device is powered on.
· USB Charging Port: Charge smartphones, tablets and other USB-charged devices.
Modular Jack Connects to SmartCord
powering your device
Smartcord USB Adapter Connects to lighter/accessory
socket
Earphone Jack
Connect to optional
Micro USB Jack
3.5 mm stereo earphone
Connects to your computer via
USB A / Micro USB cable for software up-
6
Modular Connector Plugs into detector jack
Installation
7
Installation
Your new detector comes with our latest EZ Mag MountTM. Simply slide the detector onto the mounting bracket fully and that's it. To remove the detector from the mount, simply pull the detector off of the mount. Mounting Tips: · Center of windshield between driver and passenger. · Ensure clear view of road ahead and sky above. · Avoid windshield wipers and heavily tinted areas. To Mount the Detector in Your Vehicle: 1 Remove backing from EZ Mag Mount. 2 Firmly press the EZ Mag Mount onto the windshield and flip the locking clamp to secure. 3 Tilt the display end of the detector slightly upward and engage with the mounting bracket.
The EZ Mag Mount magnet holds the detector firmly in place. 4 To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb
wheel to secure. 5 To remove the detector, simply lift the display end of the detector upward. The detector will
from the mount. 6 To remove the mount from windshield, release the locking clamp and pull the tab on top of
the EZ Mag Mount. EZ Mag Mount Care Instructions: To clean your EZ Mag Mount, simply rinse under warm water, gently wipe off any debris and allow to air dry.
8
Installation 1 Attach EZ Mag MountTM
to MAX 360 MKII
Flip Tab Down
2 Mount
Windshield
MAX 360 MKII
Operation
DOWNLOAD AND CONNECT TO DRIVE SMARTER®
1 Power on MAX 360 MKII.
2 Install and run the Drive Smarter® app on your smartphone.
3 In the Drive Smarter® app, press the Account button then select "Add Detector".
4 Follow the prompts in the Drive Smarter® app to connect MAX 360 MKII.
Note: the first time you run the app, you will be prompted to register
3 Lock Mount
4 Connect and Power On
To 12V Power Source
Drive Smarter®
drivesmarter.com/downloads
9
10
Operation
DISPLAY AND MENU
OSP/Speed Limit
Signal Band Indicator
Rear Signal Strength Meter
Front Signal Strength Meter
Signal Counter
· Signal Band Indicator
· OSP/Speed Limit Indicator
Displays the radar band of the alert: - X Band (commonly false alerts). - K band (used by police radar and false alerts) - Ka band (almost always police radar)
Over Speed alert setting, can be adjusted in the Programming menu. Bluetooth icon will appear here when paired to phone. Speed limit data will appear here when connected to the Drive
Smarter app.
- Laser (almost always police)
· Signal Strength Meters Displays the signal strength, or how close, the alert is. The more alert bars displayed, the stronger the signal strength. The left meter is front signal strength. The right meter is rear signal strength.
· Signal Counter Displays the number of alerts being detected.
· Speed
Displays the current speed. When Speed Display is off, displays the vehicle voltage
11
Operation
UNDERSTANDING YOUR DETECTOR
How Radar Works
Traffic radar, which consists of microwaves, travels in straight lines and is easily reflected by objects such as cars, trucks, even guardrails and overpasses. Radar works by directing its microwave beam down the road. As your vehicle travels into range, the microwave beam bounces off your car, and the radar antenna looks for the reflections. Using the Doppler Principle, the radar equipment then calculates your speed by comparing the frequency of the reflection of your car to the original frequency of the beam sent out. Traffic radar has limitations, the most significant of these being that it typically can monitor only one target at a time. If there is more than one vehicle within range, it is up to the radar operator to decide which target is producing the strongest reflection. Since the strength of the reflection is affected by both the size of the vehicle and its proximity to the antenna, it is difficult for the radar operator to determine if the signal is from a sports car nearby or a semi-truck several hundred feet away. Radar range also depends on the power of the radar equipment itself. The strength of the radar unit's beam diminishes with distance. The farther the radar has to travel, the less energy it has for speed detection. Because intrusion alarms and motion sensors often operate on the same frequency as X, and K-band radar, your detector will occasionally receive non-police radar signals. These transmitters generally produce much weaker readings than will a true radar encounter. As you become familiar with the sources of these pseudo alarms in your daily driving, they will serve as confirmation that your device's radar detection abilities are fully operational.
How Laser (Lidar) Works
Laser speed detection is actually light detection and ranging (LIDAR). Laser guns project a beam of invisible infrared light. The signal is a series of very short infrared light energy pulses that move in a straight line, reflecting off your car and returning to the gun. Laser uses these light pulses to measure the distance to a vehicle. Speed is then calculated by measuring how quickly these pulses are reflected, given the known speed of light. Laser is a newer technology whose use is not as widespread as conventional radar; therefore, you may not encounter it on a daily basis. And unlike radar detection, laser is not prone to false alarms. Because laser transmits a much narrower beam than does radar, it is much more accurate in its ability to distinguish between targets and is also more difficult to detect. As a result, even the briefest laser alert should be taken seriously. There are limitations to laser, however. Laser is much more sensitive to weather conditions than radar, and a laser gun's range will be decreased by anything affecting visibility, such as rain, fog or smoke. A laser gun cannot operate through glass, and it must be stationary to get an accurate reading. Because laser must have a clear line of sight and is subject to cosine error (an inaccuracy that increases as the angle between the gun and the vehicle increases), police typically use laser equipment parallel to the road or from an overpass. Laser can be used day or night.
TSR Signal Ranking Software
Your radar detector includes an optional boost in false alert filtering software to eliminate excessive alerts from erroneous K-band sources. One example of this is traffic flow monitoring systems. These systems, which are becoming more widely used in several countries, generate K-band signals to measure the flow of traffic on a given road. Unfortunately most detectors see this as a real threat and will alert you to it unnecessarily. Our proprietary TSR software, intelligently sorts, ranks and rejects this type of false alarm automatically. The result is ultimate protection without excessive false alarms.
12
Operation
PROGRAMMING MENU
Overview To access the programming menu, press the SEN and BRT buttons. Press the SEN button to change the selected menu item. Use the - or + button to change the setting on the selected menu item. Press the SEN button again to return to the selected Menu item. To exit programming, press the SEN button. A "Completed" message will display, confirming your selection(s). Restore Factory Settings To restore MAX 360 MKII to its original factory settings, press and hold the MRK and BRT buttons while powering on. "Factory Settings Restored" will display.
13
Operation
User Mode Advanced* Novice
Access and customize all Settings and Preferences Access and customize Units and Display Color only, (all other Settings are set to factory defaults)
NOTE: Switch back to Advanced Mode to view all Preferences.
Pilot Mode Scanning* Full Word
Display scanning bar and the selected SEN mode Displays only the selected SEN mode
Arrow Mode
Single* Multiple Band
Displays a single threat-direction arrow for the primary alert Displays threat-direction arrows for multiple alerts Displays color-coded threat-direction arrows for multiple alert bands
X = green, K = blue, Ka/Laser = red
Display Color Blue*/Green/Red/Amber Set color to match your vehicle's dash display
Speed Display On*
Displays current speed Displays battery voltage
Cruise Alert 20 mph* Off/20-160 mph
Offers only double beep alert tones below the specified speed
Over Speed 70 mph* Off/20-160 mph
Alerts when the specified speed is exceeded
Over Spd Limit
Off/Spd Limit*/5 Over/ 7 Over/10 Over/15 Over/ 20 Over/25 Over
Alerts when the specified speed over the speed limit has been exceeded
NOTE: only applicable when connected to a mobile Wi-Fi hotspot
Meter Mode
Standard Stand FR1*
Standard FR2
Spec
Spec FR1
Spec FR2
Expert FR Simple
Displays primary alert band with front signal strength bar graph
Displays primary alert band and signal counter with front and rear signal strength bar graphs
Displays primary alert band and signal counter with front and rear signal strength bar graphs
Displays primary alert band with numeric frequency and only front signal strength bar graph
Displays primary alert band, numeric frequency and signal counter with front and rear signal strength bar graphs
Displays primary alert band, numeric frequency and signal counter with front and rear signal strength bar graphs for primary and secondary alerts
Displays up to four alert bands with front and rear signal strength bar graphs for each
Simple messages replace alert band and signal strength bar graphs:
Caution (if traveling below Cruise Alert limit) Slow Down (if traveling above Cruise Alert limit)
14
Operation
Tones Standard*
Standard alert tones
Standard+
Standard alert tones for primary alert plus a double-beep tone for additional alerts
Mild
Mild doorbell chime alert tones
AutoMute Low / Med* / High / Off
During an alert, automatically reduces audio to selected volume level
AutoLearn On* / Off
Automatically stores and locks out false alerts
Units English* / Metric
Units for distance and speed
Language English* / Español
Language for voice and text
Voice On* / Off
Voice announcements
GPS Filter On* / Off
Enables GPS Filtering of stored false alerts
AutoPower Off / 1 Hour / 2 Hours / 4 Hours*/ 8 Hours
Powers down unit after specified time NOTE: If AutoPower is enabled, to save screen life the display screen goes blank after 30 minutes without moving. Display screen will turn on automatically after you reach 10MPH
Band Enables Default* Modified
Default Band Enables Band Enables have been modified from their default settings
Repeatedly press BRT to cycle through Band Enables. Press + or to change the selected Band Enable on or off
X Band On* / Off
K Band On* / Off
Covers frequency range: 24.050 24.250 GHz NOTE: When K Band is off, K Narrow bands are available selections
K Narrow 1 On* / Off
Covers frequency range: 24.050 24.110 GHz
K Narrow 2 On* / Off
Covers frequency range: 24.110 24.175 GHz
K Narrow 3 On* / Off
Covers frequency range: 24.175 24.250 GHz
K Narrow 4 On / Off*
Covers frequency range: 23.950 24.050 GHz
MultaRadar CD On / Off*
MultaRadar CD detection
MultaRadar CT On / Off*
MultaRadar CT detection
Operation
Ka Band
On / Off*
Covers frequency range: 33.400 36.000 GHz NOTE: When Ka Band is off, Ka Narrow bands are available selections
Ka Narrow 1
On / Off*
Covers frequency range: 33.400 33.700 GHz
Ka Narrow 2
On* / Off
Covers frequency range: 33.700 33.900 GHz
Ka Narrow 3
On / Off*
Covers frequency range: 33.900 34.200 GHz
Ka Narrow 4
On / Off*
Covers frequency range: 34.200 34.600 GHz
Ka Narrow 5
On* / Off
Covers frequency range: 34.600 34.800 GHz
Ka Narrow 6
On / Off*
Covers frequency range: 34.800 35.160 GHz
Ka Narrow 7
On / Off*
Covers frequency range: 35.160 35.400 GHz
Ka Narrow 8
On* / Off
Covers frequency range: 35.400 35.600 GHz
Ka Narrow 9
On / Off*
Covers frequency range: 35.600 35.840 GHz
Ka Narrow 10
On / Off*
Covers frequency range: 35.840 36.000 GHz
Ka-POP
On/Off*
Ka-POP detection
Laser
On* / Off
Laser detection
TSR
On* / Off
Traffic Sensor Rejection (TSR) filtering
Exit
Exit Band Enables menu
K Notch
On / Off*
Reduces sensitivity of K band frequency range: 24.190 24.210 GHz NOTE: K Notch is effective at reducing alerts to certain vehicle collision avoidance systems
Shifters
Receive / Shift* / Shift4 / Shift6 / Shift8 / Shift10 / Off
Shifter mode. Receive = receive-only Shift4/6/8/10 puts shifters in receive-only mode after 4/6/8/10 seconds from receiving an alert
NOTE: only available when optional ZR5 or ZW5 shifters are connected
Marker Enable
Default* Modified
Default Marker Enables Marker Enables have been modified from their default settings
Repeatedly press BRT to cycle through Marker Enables. Press + or to change the selected Band Enable on or off
15
16
Operation
Other Red light Red & Speed Speed Camera Speed Trap Air Patrol
Exit Clear Location
Bluetooth Auto Update Software Update
Interface
On* / Off
Other location
On* / Off
Red light camera
On* / Off
Red light and speed camera
On* / Off
Speed camera
On* / Off
Speed trap
On / Off*
Aircraft enforcement areas
Exit Marker Enables menu
Marked
Clear all user marked locations
Lockouts
Clear all locked out false alerts
Defender
Clear all Defender locations
Format
Clears all locations Press BRT twice to confirm selection
On* / Off
Allows connection to the Drive Smarter app
Off / Database/ Firmware/All*
Automatically checks for the selected updates when connected to the internet
Database/Firmware Perform an update to the selected software
Mode 1* Mode 2
Supports accessories including ZR5 and ZW5 Supports aftermarket accessories
Serial Number and Software Version
To view your MAX 360 MKII's serial number and software revision, press and hold the MRK and MUTE buttons while powering on the detector.
User Mode
Advanced Access and customize all settings and preferences.
Novice
Access and customize only Units (English or metric) and Display Color. All other preferences are set to factory defaults. To view all settings and preferences, you must switch to Advanced mode.
Operation
Arrow Mode
Single Arrows are displayed indicating the direction of only the primary threat. All arrows use your selected display color.
Multiple Threat-direction arrows are displayed for multiple threats. When multiple threats are displayed, the direction arrow of the primary threat will blink.
Band
Threat-direction arrows are color-coded for the band that is being detected. When multiple threats are displayed, the direction arrow of the primary threat will blink. X band = green, K band = blue, Ka band and Laser = red
Display Color
The display graphics can be changed to blue, green, red or orange to match the instrument lighting of your vehicle.
Speed Display Turns Speed Display off or on. When Speed Display is off, the vehicle's voltage is displayed.
Cruise Alert
While traveling below the set Cruise Alert speed, all alerts sound a short double beep. The alert will fully sound when you exceed the Cruise Alert speed.
Over Speed
You can set the Over Speed alert to notify you when you are traveling over a specified speed. When you travel above the speed that you have set, the background display for your current speed will turn red and a voice prompt will announce "Over Speed".
When connected to the Drive Smarter app, the Over Speed setting is automatically set to the speed limit showing on the display. If no speed limit data is available and the display shows --, the Over Speed setting is used.
Over Speed Limit
Note: this setting only applies when MAX 360 MKII is connected to the internet.
When the speed limit is exceeded by the set speed, the background for your current speed will change to red and a voice prompt will announce "Over Speed". If no speed limit data is available and the display shows --, the Over Speed setting is used.
17
18
Operation
Meter Mode MAX 360 MKII offers five different settings for displaying information about alerts.
Standard The Standard meter mode provides only the band information and front signal strength information of a single alert. When radar is detected, the band (X, K or Ka) and a bar graph of the signal's strength are displayed. When laser is detected, the display will simply read "Laser." If there are multiple alerts present, only the highest priority threat is displayed. Laser is the highest priority threat, followed by Ka, K, then X band radar.
Standard FR
The Standard FR meter mode displays the band of the highest priority threat along with a front and rear bar graph of its signal strength.. The left bar graph shows the signal strength in front of the detector while the right bar graph shows the signal strength from the rear. If there are multiple alerts present, only the signal strength of the highest priority threat is displayed. Laser is the highest priority threat, followed by Ka, K, then X band radar. The number in between the bar graphs is the total number of alerts that are being detected.
Spec FR
The Spec FR meter mode displays the numeric frequency and band of the highest priority threat along with a front and rear bar graph of its signal strength. The left bar graph shows the signal in front of the detector while the right bar graph shows the signal strength from the rear. If there are multiple alerts present, only the signal strength of the highest priority threat is displayed. Laser is the highest priority threat, followed by Ka, K, then X band radar. The number in between the bar graphs is the total number of alerts that are being detected.
Expert FR
Expert FR meter mode (FR = Front and Rear signal strengths) simultaneously tracks up to four radar alerts displaying each alert's band along with a bar graph of their front and rear signal strengths. When using this meter mode the rear signal strength bar graph is always the opposite color of the selected display color. In the above image, a Ka band, two K bands, and an X band signal are being detected. The X band alert is grey to show that it is a locked out false alert. For more information about locking out false alerts see the GPS Filtering/TrueLock section. Expert FR meter mode can help you spot a change in your normal driving environment (e.g., a traffic radar unit being operated in an area where there are normally other signals present).
19
Operation
Simple
Simple messages replace bands and signal strengths or frequencies:
Caution
used when an alert is received while you are traveling below your current Cruise Alert setting (or posted speed limit for your current location when connected to Drive Smarter).
Slow Down displayed when an alert is received while you are traveling above the current Cruise Alert setting (or posted speed limit of your current location, when connected to Drive Smarter).
Tones
Standard
The factory default Standard alert tones uses a Geiger counter-type sound to indicate the signal strength and type of radar signal being encountered. When you encounter radar, a distinct audible alert will sound and will increase as the signal gets stronger. This allows you to judge the distance from the signal source without taking your eyes off of the road. Each band has a distinct tone for easy identification:
X band = beep tone K band = brap tone Ka band = double-brap tone Laser = solid brap tone POP = solid brap tone
Standard Plus
Features the Standard alert tones outlined above for the primary alert, plus double-beep tones for additional alerts.
Mild Mild alert tones offer softer, simpler alert tones that are less obtrusive to the driving experience:
X band, K band, Ka band and POP = Doorbell chime Low signal strength = Double chime High signal strength = Triple chime If alert remains in area more than 15 seconds = Single chime (as a reminder) Laser = Solid brap tone Since laser signals are a possible threat no matter how weak, laser alerts are always full strength.
AutoMute
Your MAX 360 MKII also includes ESCORT's patented AutoMute feature. Once MAX 360 MKII alerts you to a radar encounter at your selected volume level, it automatically reduces the volume to the selected AutoMute level. This keeps you informed without the annoyance of a continuous full-volume alert. If you prefer, you can turn the AutoMute feature off.
20
Operation
AutoLearnTM Intelligence The AutoLearn feature analyzes (over time) the source of radar signals by location and frequency. This allows MAX 360 MKII to determine if a fixed location signal is a real threat or a false one. If it determines that the signal is an automatic door opener, motion sensor, etc., it automatically locks out this source at this particular location. A "Stored" message will appear on the display when a signal has been automatically locked out. AutoLearn needs to encounter the exact frequency in the same location approximately three times to lock it out. Since some door openers are turned on and off routinely, some variations may occur. Variations may also occur with seasonal temperature changes that can affects the frequency that these radar sources transmit. MAX 360 MKII will also unlearn signals to protect you from locking out real threats. If a particular signal is no longer present at a location that was previously locked out, MAX 360 MKII will unlock that signal. If you prefer, you can turn the AutoLearn feature off.
GPS Filter (TrueLock) MAX 360 MKII is equipped with a TrueLock GPS Filter to store and lock out, or ignore, fixed location false alerts in its memory. Common sources of fixed location false alerts are storefront automatic door openers and motion sensors. The TrueLock GPS Filter will not lock out moving false alerts that are commonly caused by vehicle's blind spot monitoring and collision avoidance systems.
Locking Out False Alerts To manually lock out a fixed location false alert (X band, K band or laser only), press the MUTE button three times during an alert. Pressing the first time will silence the audio. Pressing a second time will generate a prompt on the display that will read "Lockout?" Press a third time to confirm you want to lock this signal out by location and frequency. A "Stored" message will be displayed. Once a signal has been stored, MAX 360 MKII will not audibly alert the next time you approach this area but will display the locked-out alert in grey.
Locked Out Alert
To unlock a signal that has already been stored, simply press the MUTE button twice while receiving the locked out alert. The display will read "Unlock?" when pressing MUTE the first time. Press the MUTE button again to unlock it from memory. The display will read "Unlocked" to confirm your action. Note: When the GPS Filter is set to OFF, you do not have access to MAX 360 MKII's other GPSenabled features (e.g., Defender Database alerts, marking locations, etc.).
Operation
AutoPower
This feature automatically turns off MAX 360 MKII after a set period of time to save unnecessary drain on your battery. This is especially useful if your vehicle has a constant-power ignition. To turn MAX 360 MKII on again you must press the power button.
Note: If AutoPower is on, to save screen life the display screen goes blank after 30 minutes without moving. The display screen will turn on automatically after you reach 10MPH.
Band Enables
In the factory default setting the suggested radar and laser bands for North America are monitored and sources of some common false alerts are rejected. It is highly recommended that you use your MAX 360 MKII in this mode.
If you modify Band Enables then this setting will show Modified. The MAX 360 MKII will also notify you during the startup sequence with an audible alert.
WARNING: Do not turn off any Band Enables unless you are absolutely certain there are no traffic radar guns in your area using that specific band.
K Notch
Reduces sensitivity of K band in the frequency range of 24.190 24.210 GHz. This is effective at reducing alerts to certain vehicle collision avoidance systems.
Shifters (only available when optional ZR5 or ZW5 laser shifters are connected)
Sets the shifter mode of operation. Receive = receive-only mode. Shift4/6/8/10 puts the laser shifters into receive-only mode after 4/6/8/10 seconds from receiving an alert. After 30 seconds of not receiving a Laser alert, the shifters automatically return to shift mode. You can also manually put the laser shifters into receive-only mode by double tapping the Mute button on the detector or SmartCord.
Marker Enables MAX 360 MKII gives advanced warning of upcoming markers at the following distances:
Red light cameras Red light & speed cameras Speed cameras
Speed traps Other
250 ft or 10 seconds 250 ft or 10 seconds 500 ft when traveling below 55 mph 1,000 ft when traveling above 55 mph 0.3 mi or approximately 1,584 ft 500 ft when traveling below 55 mph 1,000 ft when traveling above 55 mph
21
22
Operation
To Mark A Location - Press MRK. The display will read "Mark?" Press MRK again to bring up a menu of markers to
choose from. - Use the plus and minus buttons to scroll through the markers then press MRK to select the marker
that you wish to use at this location. - The display will read "Marked!" Air Patrol locations cannot be marked by the user. Note: When a location is marked the first time, you must travel at least 1 mile away from that location to receive an alert when you return to the area.
To Unmark A Location Touch the MRK button when you are receiving a marked-location alert. The display will read "Unmark?" Touch the MRK button again to confirm. The display will read "Unmarked!" Clear Locations At some point, you may wish to clear some of the data in MAX 360 MKII's database. This may include any of the following: Defender Database data, Marked locations or false alert Lockouts. To clear locations in the selected database, select the database then press MUTE to confirm. Format clears locations in all databases.
Troubleshooting
PROBLEM
Detector beeps briefly at the same location every day, but no radar source is in sight.
SOLUTION
A motion sensor or intrusion alarm is located within range of your route. If you have AutoLearn enabled, the factory default setting, then MAX 360 MKII will store this signal after about 3 passes and no longer alert to it.
Detector did not alert when a police car was in view.
Officer may not have radar or laser unit turned on. VASCAR (Visual Average Speed Computer and Recorder), a stopwatch method of speed
detection, may be in use.
Detector's audible alerts become softer after the first few alerts.
Detector is in AutoMute mode. See "AutoMute" in the Settings & Preferences section for details.
The power-on sequence reoccurs while you are driving.
A loose power connection can cause MAX 360 MKII to be briefly disconnected and will retrigger the power-on sequence. Check all connections.
You wish to restore the factory default settings.
Press and hold the MRK and BRT buttons while powering on the detector. A "Factory Settings Restored" message will display, acknowledging the
reset.
The device will not turn on.
Check that vehicle ignition is on.
The display is blank.
MAX 360 MKII is in Dark mode. Press the BRT button to adjust the brightness.
23
24
Trademarks Acknowledgment, Warnings, and Regulatory Information
©2022 ESCORT Inc. ESCORT®, MAX 360 MKII®, Defender®, AutoLearn®, TrueLockTM, AutoSensitivityTM, SpecDisplayTM, ExpertMeterTM, IVT FilterTM, SmartMuteTM and EZ Mag MountTM are trademarks of ESCORT, Inc. Drive Smarter® is a registered trademark of Cedar Electronics Corporation. Apple and the Apple Logo are trademarks of Apple Inc. Android, Google Play, and the Google Play Logo are trademarks of Google Inc. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG and any use of such marks by ESCORT Inc is under license. Ambrella, and the Ambrella Logo are trademarks of Ambrella, Inc. All other brands, product names and company names are trademarks of their respective owners. Features, Specifications and prices subject to change without notice. FCC NOTE: Modifications not expressly approved by the manufacturer could void the user's FCC granted authority to operate the equipment. FCC ID: QKLM13. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC Part 15.21 Warning StatementNOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. FCC Part 15.105(b) Warning Statement- (ONLY Required for 15.109-JBP devices) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help Warning: This device should be installed and operated with minimum 20 cm between the radiator and your body.
DISPOSAL OF ELECTRONICS EQUIPMENT: This product may contain hazardous substances that could impact health and the environment if not disposed of properly.
The crossed out wheeled bin symbol indicates that the product should not be disposed of along with household waste. It should be handed over to an applicable collection point for the recycling of electrical equipment. By ensuring that this product is disposed of correctly you will help/prevent potential negative impact on the environment. If you need more information on the collection, reuse and recycling systems, please contact your local civic office or the shop where it was originally purchased.
25
Warranty
LIMITED 1-YEAR WARRANTY
Escort, Inc. ("Escort") warrants that this product and the component parts thereof, will be free of defects in workmanship and materials for a period of one year from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser. If the product is under warranty, it will be repaired or exchanged depending on the model as determined at Escort's sole discretion. Such remedy shall be your sole and exclusive remedy for any breach of warranty. The procedure for obtaining service and support, and the applicability of this warranty, will vary depending on the country or jurisdiction in which you purchased and utilize the product. For the details on obtaining product service, support and warranty please visit https://www.escortradar.com/pages/contact-us Provided that the product is utilized within the U.S.A.- Escort will, without charge, repair or replace, at its option, defective products, products or component parts upon delivery to the Escort Factory Service department, accompanied by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt. You must pay any initial shipping charges required to ship the product for warranty service, but the return charges, to an address in the U.S.A., will be at Escort's expense, if the product is repaired or replaced under warranty. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state and country to country. Exclusions: This limited warranty does not apply: 1) To any product damaged by accident; 2) In the event of misuse, ordinary wear, failure to follow directions, or improper maintenance of the product or as a result of unauthorized alterations or repairs; 3) If the serial number has been altered, defaced, or removed; 4) If the product was purchased or is utilized in a jurisdiction not covered by the limited warranty. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty. Escort shall not be liable for any incidental, consequential or other damages; including, without limitation, damages resulting from loss of use or cost of installation. Some states and countries do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country
26