MASTOP Model 1220 Retro Square Analog Digital Watch User Manual

Uvod

Thank you for choosing the MASTOP Model 1220 Retro Square Analog Digital Watch. This timepiece combines a classic retro design with modern functionality, offering both analog and digital displays, temperature measurement, multiple time zones, an alarm, and a stopwatch. This manual provides detailed instructions to help you set up, operate, and maintain your watch for optimal performance.

Proizvod gotovview

Ključne značajke

• Moderan retro dizajn: Combines a vintage square case with both analog and digital displays.
• Waterproof & Temperature Measurement: 50-meter water resistance (3ATM) and a built-in temperature display.
• Durable Premium Materials: Constructed with a zinc alloy case, mineral tempered glass, and a stainless steel strap.
• Udobno pristajanje: Adjustable band for various wrist sizes.
• Višenamjenski: Equipped with luminous display, alarm, stopwatch, and three time zones.

Komponente sata

Familiarize yourself with the main components of your MASTOP Model 1220 watch:

This image displays the watch face, showing the two analog dials, the digital display for time, date, and temperature, and the four control buttons located on the sides: MODE (top left), LIGHT (bottom left), START/STOP (top right), and SPLIT/RESET/SET (bottom right).

• Analog Dials: Two separate dials for displaying time.
• Digitalni prikaz: Prikazuje vrijeme, datum, dan u tjednu i temperaturu.
• Gumb MODE: Cycles through different functions (Time, Alarm, Stopwatch, Temperature).
• LIGHT tipka: Aktivira pozadinsko osvjetljenje za bolju vidljivost u uvjetima slabog osvjetljenja.
• tipka START/STOP: Used for starting/stopping stopwatch, and adjusting settings.
• SPLIT/RESET/SET Button: Used for split times in stopwatch mode, resetting, and confirming settings.

Postavljanje

Početno uključivanje

Your watch comes with a pre-installed battery (CR2032). If the display is blank, press any button to activate it. If it remains blank, the battery may need replacement.

Postavljanje digitalnog vremena i datuma

Za postavljanje digitalnog vremena i datuma:

1. Pritisnite tipku NAČIN RADA više puta pritisnite tipku dok se ne prikaže način podešavanja vremena (obično označen treperenjem znamenki).
2. Koristite START/STOP za odabir znamenke ili postavke koju želite podesiti (npr. sati, minute, godina, mjesec, dan).
3. Koristite SPLIT/RESET/SET button to increase the value of the selected digit. Hold the button to rapidly advance.
4. Repeat steps 2 and 3 for all desired time and date settings.
5. Nakon što su sve postavke ispravne, pritisnite tipku NAČIN RADA gumb za izlazak iz načina podešavanja i povratak na normalni prikaz vremena.

Postavljanje analognog vremena

The analog dials are typically synchronized with the digital time or set independently through digital controls. If your analog hands do not match the digital time after setting, consult the specific instructions for analog hand adjustment within the digital setting mode, which may involve a combination of button presses while in time setting mode.

Podešavanje trake

The stainless steel band is adjustable to ensure a comfortable fit. To adjust the band:

1. Locate the clasp mechanism on the band.
2. Use a small tool (like a flat-head screwdriver or a watch tool) to lift the locking plate on the clasp.
3. Slide the clasp along the band to the desired position.
4. Press the locking plate back down firmly to secure the clasp in place. Ensure it clicks securely to prevent accidental opening.

This image shows the MASTOP Model 1220 watch comfortably fitted on a wrist, illustrating the adjustable stainless steel band. The band can be adjusted by sliding the clasp mechanism to achieve a secure and comfortable fit.

Upute za rad

Odabir načina rada

Pritisnite tipku NAČIN RADA button to cycle through the watch's various functions: Time Display, Alarm, Stopwatch, and Temperature Display.

Funkcija alarma

Za postavljanje i aktiviranje alarma:

1. Pritisnite tipku NAČIN RADA button until the Alarm mode is displayed.
2. Koristite START/STOP gumb za odabir znamenki sati ili minuta.
3. Koristite SPLIT/RESET/SET gumb za podešavanje vremena alarma.
4. Pritisnite NAČIN RADA to exit. To turn the alarm on/off, typically a short press of the START/STOP button while in alarm mode will toggle it.

Funkcija štoperice

Da biste koristili štopericu:

1. Pritisnite tipku NAČIN RADA button until the Stopwatch mode is displayed (usually showing '00:00:00').
2. Pritisnite tipku START/STOP gumb za pokretanje štoperice.
3. Pritisnite tipku START/STOP ponovno pritisnite gumb za zaustavljanje štoperice.
4. Za snimanje međuvrijeme, pritisnite SPLIT/RESET/SET button while the stopwatch is running. The display will show the split time while the stopwatch continues to run in the background. Press SPLIT/RESET/SET ponovno za povratak na vrijeme izvođenja.
5. Za resetiranje štoperice na nulu, pritisnite SPLIT/RESET/SET button when the stopwatch is stopped.

Pozadinsko osvjetljenje

Pritisnite tipku SVJETLO button (bottom left) to illuminate the digital display for a few seconds, allowing you to read the time in dark conditions.

Prikaz temperature

Do view the temperature, cycle through the modes using the NAČIN RADA button until the temperature is displayed. Note that the temperature sensor is located on the watch body, and readings may be influenced by your body heat. For a more accurate ambient temperature reading, remove the watch from your wrist for approximately 15-20 minutes.

Održavanje

Vodootpornost

Your MASTOP Model 1220 watch is water resistant to 3ATM (50 meters). This means it can withstand daily splashes, rain, and brief immersion in water. However, it is nije prikladno for swimming, showering, diving, or snorkeling. Avoid pressing buttons while the watch is wet or submerged to prevent water ingress.

Čišćenje

To keep your watch clean, wipe the case and band regularly with a soft, dry cloth. For stubborn dirt, a slightly damp Može se koristiti krpa, nakon čega slijedi odmah sušenje. Izbjegavajte upotrebu jakih kemikalija, otapala ili abrazivnih sredstava za čišćenje jer mogu oštetiti završni sloj sata.

Zamjena baterije

The watch uses a CR2032 coin cell battery. When the display becomes dim or stops functioning, it's time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

Rješavanje problema

Difficulty Setting Time

If you encounter difficulty setting the time or other functions, please review the 'Setup' section carefully. Watch settings often require precise button presses and sequences. Patience is key. If issues persist, ensure the battery is not low.

Netočno očitavanje temperature

The watch's temperature sensor is affected by body heat. For an accurate ambient temperature reading, remove the watch from your wrist and allow it to sit in the open air for 15-20 minutes before checking the display.

Watch Band Pinches Hair

Some metal link bands may occasionally catch arm hair. Ensure the band is adjusted to a comfortable, but not overly tight, fit. If discomfort persists, consider consulting a jeweler for alternative band options or adjustments.

Small Text on Watch Face

The watch face features detailed information in a compact design. If you find the text difficult to read, especially in certain lighting conditions, using a magnifying glass may assist in viewing the smaller indicators.

Tehnički podaci

• Broj modela: 1220
• Marka: MASTOP
• Vodootpornost: 3ATM (50 metara)
• Dial Case Diameter: 40 mm (1.57 inča)
• Dial Case Thickness: 12 mm (0.47 inča)
• Širina trake: 23 mm (0.9 inča)
• Dužina trake: 220 mm (8.66 inča)
• Težina gledanja: 140 g (5 oz)
• Materijal kućišta: Legura cinka
• Materijal trake: Nehrđajući čelik
• Materijal stakla: Mineral Tempered Glass
• Vrsta baterije: CR2032
• Proizvođač: Mastop