Philipsov priručnik za solarnu sigurnosnu svjetiljku

Uvod

Thank you for choosing the Philips Solar Security Light. This manual provides essential information for the safe and efficient operation of your solar-powered, wall-mounted flood light with PIR motion sensor. Please read these instructions carefully before installation and use, and retain them for future reference.

Sigurnosne informacije

• Provjerite je li površina za montažu stabilna i može li podnijeti težinu rasvjetnog tijela.
• Ne pokušavajte rastavljati ili modificirati proizvod. To može poništiti jamstvo i predstavljati sigurnosne rizike.
• Održavajte solarni panel čistim kako biste osigurali optimalne performanse punjenja.
• Avoid looking directly into the light source when it is active, as it may cause eye strain.
• Na kraju životnog vijeka proizvoda i njegovih dijelova odgovorno odložite u skladu s lokalnim propisima.

Sadržaj paketa

Prije instalacije provjerite jesu li sve komponente prisutne:

• Philips Solar Security Light (1 unit)
• Daljinski upravljač (1 jedinica)
• Nosač za montažu (1 jedinica)
• Vijci (2 jedinice)
• Wall Plugs (2 units)

Proizvod gotovview

The Philips Solar Security Light is an outdoor, solar-powered flood light designed for enhanced security and illumination. It features a PIR motion sensor, high-brightness LEDs, and multiple lighting modes.

Slika: Prekoview of the Philips Solar Security Light, highlighting its durable design with a solar panel, three LED light heads, and an integrated motion sensor.

Ključne karakteristike:

• Visoka svjetlina: 800 lumens with 6500K cool daylight color temperature.
• PIR senzora pokreta: Detects motion up to 49.2 feet with a 180-degree detection angle.
• 3 načina osvjetljenja: Customizable illumination settings for various needs.
• Na solarni pogon: Equipped with an upgraded polycrystalline solar panel and a 2000 mAh high-capacity battery for efficient charging and extended use.
• Otporan na vremenske uvjete: IP65 rated for resistance against heavy rain, humidity, and extreme temperatures.
• Daljinski upravljač: Allows convenient adjustment of light modes without manual interaction.

Postavljanje i instalacija

The Philips Solar Security Light is designed for easy wall-mounted installation with no wiring required. It comes pre-assembled.

Koraci instalacije:

1. Odaberite lokaciju: Select an outdoor location that receives direct sunlight for most of the day to ensure optimal charging of the solar panel. The light should be mounted on a wall.
2. Označite točke bušenja: Hold the mounting bracket against the desired wall location and mark the positions for the two screws.
3. Izbušite rupe: Drill two holes at the marked points. Insert the wall plugs into the drilled holes.
4. Pričvrstite montažni nosač: Pričvrstite nosač za montažu na zid pomoću priloženih vijaka.
5. Montirajte svjetlo: Slide the solar security light onto the mounting bracket until it clicks securely into place.
6. Podesite svjetiljke i senzor: Adjust the three light heads and the PIR motion sensor to cover the desired area. The motion sensor has an adjustable angle of 180 degrees.

Image: Visual guide for installing the Philips Solar Security Light, including dimensions and the accessories provided for wall mounting.

Image: Illustration of the motion sensor's coverage, showing a 180-degree detection angle and a maximum sensing range of 49.2 feet.

Upute za rad

The Philips Solar Security Light features three distinct lighting modes, controllable via the included remote control.

Načini osvjetljenja:

1. Način rada senzora: The light remains off until motion is detected. Upon detection, it illuminates at 100% brightness (800 lumens) for approximately 25 seconds, then turns off.
2. Zatamnjeni način rada: The light stays on continuously at a low brightness of 10% (80 lumens) throughout the night.
3. Način rada zatamnjivanja + senzora: The light stays on continuously at a very low brightness of 2-3% (16-24 lumens). When motion is detected, it brightens to 100% (800 lumens) for approximately 25 seconds, then returns to the dim state.

Image: Detailed explanation of the three operational modes, showing how the light behaves in Sensor, Dim, and Dim + Sensor modes based on motion detection and ambient light.

Use the remote control to switch between these modes as needed. Ensure the remote control has a clear line of sight to the light fixture for proper function.

Održavanje

Regular maintenance ensures optimal performance and longevity of your Philips Solar Security Light.

• Čišćenje solarnih panela: Povremeno obrišite solarnu ploču mekom,amp cloth to remove dust, dirt, or debris. A clean solar panel ensures maximum sunlight absorption and charging efficiency.
• Čišćenje uređaja: Clean the light fixture with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
• Baterija: The integrated high-capacity 2000 mAh battery is designed for long-term use. No user maintenance or replacement is required for the battery.
• Otpornost na vremenske uvjete: The IP65 rating ensures the light is protected against dust and water jets. However, avoid submerging the unit in water.

Image: Focus on the high-quality solar panel, illustrating its role in providing power for 8-10 hours of operation and its 1800mAh high-capacity battery.

Rješavanje problema

Ako naiđete na probleme sa svojom Philipsovom solarnom sigurnosnom svjetiljkom, pogledajte sljedeće uobičajene probleme i rješenja:

• Svjetlo se ne pali noću:
  • Osigurajte da solarni panel prima dovoljno izravne sunčeve svjetlosti tijekom dana.
  • Check if the light is in the correct operating mode (e.g., not in 'off' state if the remote has an off button).
  • Verify that the remote control battery is functional.
• Svjetlo je slabo ili svijetli samo kratko vrijeme:
  • The solar panel may not be fully charged. Ensure it is clean and exposed to direct sunlight for at least 6-8 hours.
  • Ambient temperature can affect battery performance; extreme cold may reduce operating time.
• Senzor pokreta ne detektira pokret:
  • Provjerite je li leća senzora čista i bez prepreka.
  • Verify the light is in a motion-activated mode (Sensor Mode or Dim + Sensor Mode).
  • Adjust the angle of the motion sensor to cover the desired detection area.

If problems persist, please contact Philips customer support for further assistance.

Tehnički podaci

Image: A comparison table highlighting key specifications of the Philips solar security light, such as brightness, lighting modes, battery capacity, and waterproof rating.

Jamstvo i podrška

Za informacije o jamstvu i korisničku podršku obratite se službenom Philipsovom webweb-mjesto ili se obratite njihovoj službi za korisnike. Sačuvajte račun kao dokaz o kupnji.

Za dodatnu pomoć posjetite: www.philips.com/support