hp BTS02 Bluetooth Speaker
Product Usage Instructions
Bluetooth Connection
- To reduce volume: Short press
- To play the previous song: Long press
- To increase volume: Short press
- To play the next song: Long press
- To power on/off: Long press
- To switch light or mode (TF card required): Click or long press accordingly
- To pair TWS (True Wireless Stereo): Double click on any machine
Low Voltage and Automatic Shutdown:
If the battery level is lower than 10%, the audio system will emit a prompt tone. Charge the device promptly. If the battery level drops below 3%, the machine will automatically shutdown.
TWS Function:
To activate TWS, turn on both machines simultaneously, then double-click on any machine to pair. Wait for the pairing prompt tone and tick sound to indicate successful pairing. Use the host to connect to Bluetooth and double-click the switch key of the auxiliary machine to pair/disconnect TWS.
Bluetooth Connection:
- Long press to turn on speaker until blue LED flashes quickly for pairing mode.
- Search for ‘HP BTS02 Bluetooth Speaker’ on your Bluetooth device list and connect.
- Once connected, the speaker emits a prompt sound and the blue LED stays on constantly.
- In subsequent uses, automatic connection occurs when Bluetooth on the mobile device is turned on.
Product Introduction
- Bluetooth 5.0 scheme supports multiple protocols with low power and high transmission
- Support for Bluetooth hands-free calls
- Mini and corn pact body, accompanied by music anytime and
- TWS interconnection
The complete set of products includes the following
- Bluetooth speaker* 1
- Type-C charging cable *1
- Quick Installation Guide
- Lanyard
Specifications
- Product Name: Bluetooth Speaker
- Product Model: BTS02
- Bluetooth Version: Bluetooth 5.0
- Horn Size: 52mm
- Rated Power: 5W
- Frequency Response: 60Hz – 16kHz
- Rated Voltage and Current: DC 5V – 500mA
- Rated Voltage/Current of Lithium Battery: 3.7V – 600mA
- Charging Time: Not specified
- Listening Time: About 8 hours (50% volume)
- Play/Function: Bluetooth, TF card support, TWS interconnection
- Speaker Size: 63.5 x 80mm
- Speaker Weight: 215g
Icon and function description
Tum off: When not using the audio system, press and hold the”
” key to turn off the computer to prevent power loss.
Low voltage alarm and automatic shutdown function: When the battery level is lower than 10%, the audio system will emit a prompt tone. At this time, the audio system should be charged in a timely manner. When the battery level is lower than 3%, the machine will automatically shutdown.
TWS function: when carrying out the TWS function, prepare two whole machines, turn on both machines at the same time, after turning on the machine, double-click any machine (double-click is the host), the sound of “tick” and “tick” appears when double-clicking, and wait for about 1 minute after the prompt tone appears. The sound of “tick” will appear when the pairing is completed, and the machine has been paired successfully, and then you can choose a song to play on the Bluetooth device. When the host is connected to Bluetooth, double-click the switch key of the auxiliary machine to pair/disconnect the TWS. 2. No Bluetooth connection status Double-click any machine for TWS pairing/disconnection.
Connection
Bluetooth audio connection
- After pressing and turning on the speaker fora long time, the blue LED will flash quickly, and the pairing mode will be entered.
- Tum on the Bluetooth device to search for Bluetooth devices. Find “HP bts02 Bluetooth Speaker “‘ in the Bluetooth device list. After successful connection, the speaker emits a prompt sound and the blue LED turns on constantly.
- In subsequent use, as long as the Bluetooth on the mobile device is turned on, it can be automatically connected.
The complete set of products includes the following
When using, please read the following suggestions to help you comply with the warranty terms and extend the service life of the product.
- Keep the product dry and do not place it in a damp place to avoid affecting the internal circuitry of the product.
- It is necessary to avoid using this product during intense sports or excessive sweating to prevent sweat from penetrating into the product and damaging the product.
- Do not place the product in the sun or at high temperatures. High temperatures can shorten the service life of electronic components, damage batteries, and deform some plastic components.
- Do not place the product in an excessively cold place to avoid damaging the internal circuit board.
- Do not attempt to disassemble the product, which may be damaged by non professional personnel.
- Do not drop, vibrate strongly, or hit the product with hardware to avoid damaging the internal circuit.
- Do not use strong chemicals or cleaning agents to clean products. If cleaning is necessary, please use neutral solvents or clean water.
- Do not scribble on the surface of the product with a pointed body to avoid damaging the housing and affecting the appearance. If the product does not work properly, please send it to your qualified maintenance organization.
Safety precautions
- Do not plug into a power outlet
- Children should use this equipment under adult supervision, this product is not a toy.
- Using speakers at high volume, especially for a long time, may cause damage to your hearing.
- Dispose of discarded electronic products correctly, electronic and electrical equipment, components, batteries and other domestic waste shall not be discarded together.
- There is a danger of explosion if the battery is not replaced properly, so it can only be replaced with batteries of the same type or equivalent.
- For products with removable batteries, batteries must be recycled or properly disposed of. For products with non-removable batteries, disassembly is prohibited.
- Batteries are not allowed to be disassembled, impacted, squeezed or put into fire. Do not use batteries to be exposed to conductivity, liquid, fire or high temperature.
- If the battery is bulging, leaking, discoloring, smelly or otherwise abnormal, do not continue to use it.
- Short-wave FM signals emitted by wireless products may affect the normal use of other electronic and medical equipment.
- Do not use this product in medical institutions, airplanes, gas stations, or near automatic doors or automatic fire alarms.
- If the consumer uses a power adapter for charging, they should purchase a matching power adapter that is certified by CCC and meets the requirements of the standard
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, The device has been evaluated to meet general RF exposure requirement. The device ca n be used in portable exposure condition without restriction.
FAQ
- Q: How can I know if the battery is low on the Bluetooth speaker?
- A: The audio system will emit a prompt tone when the battery level is below 10%. Charge the device immediately. Automatic shutdown occurs when the battery level is below 3%.
- Q: How do I activate TWS function on the Bluetooth speaker?
- A: Turn on both machines simultaneously, then double-click on any machine to pair for TWS. Follow the pairing prompts for successful connection.
Documents / Resources
 | hp BTS02 Bluetooth Speaker [pdf] Instruction Manual BTS02 Bluetooth Speaker, BTS02, Bluetooth Speaker, Speaker |
