Hotack Bluetooth projector Instructions

Hotack-logo

Hotack Bluetooth projector

Hotack-Bluetooth-projector-product

Attention
Please read this manual carefully before use and keep it for future reference.

  1. The projector is non dustproof or waterproof.
  2. In order to reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
  3. Please use the original power adapter. The projector should work under specified rated power supply.
  4. When projector is working, please do not look directly into the lens, the strong light will flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
  5. Do not cover the vents of projector. Heating will reduce the life of projector and cause danger.
  6. Regularly clean projector vents, or dust may cause cooling malfunction.
  7. Do not use the projector in greasy, damp, dusty or smoky environment. Oil or chemicals will cause malfunction.
  8. Please handle with care during daily use.
  9. Please cut off the power if the projector is out of use for long time.
  10. Non-professionals are forbidden to disassemble the projector for testing and maintenance.

Structure description

This manual is for reference only. It is subject to change without prior notice. Hotack reserves the right of final interpretation.

Hotack-Bluetooth-projector- (2)

Please rotate the focus wheel to adjust the focus for optimal definitionHotack-Bluetooth-projector- (3)

Mouse connection and control

  • Step 1 . Please open the battery cover of the mouse and take out the mouse receiver.
  • Step 2. Please install 2 AAA batteries in the mouse and turn on the mouse power switch
  • Step 3. Please install the mouse receiver in the USB port of the projector. Hotack-Bluetooth-projector- (4)

Tips

  1. The left mouse button is to select, the right button is to go back to the previous page
  2. Please adjust the volume of the projector via the remote control. The projector also support wired mouse

How to connect projector with HDMI

  • Step 1. Please use an HDMI cable to plug into the HDMI port of the projector
  • Step 2. Then please plug another end of the HDMI cable into the HDMI portof the laptop or computer
  • Step 3. Please find the HDMI option on the projector and enter. Operation son projector: Home Screen-HDMIHotack-Bluetooth-projector- (5)

The HDMI option is in the Home Screen of the projector

Remote control functions

Note: Please install 2 AAA batteries in the remote control Hotack-Bluetooth-projector- (6)

How to use Miracast with projector

(Android devices)

  • Step 1: As shown in the picture below, please tum on the WiFi function of the projector, and then tum on the WiFI function of your Android device(Phone or tablet)
    Note: Only need to tum on the WiFi function of both, not necessarily need lo connect to the network
    Hotack-Bluetooth-projector- (8) Home screen Setting Networking settngs
  • Step 2. Open Miracast Receiver. Operations on Projector: Home Screen—+Applications—-+Miracast ReceiverHotack-Bluetooth-projector- (8)
  • Step 3. Operations on your Android devices(phone or tablet): Turn on the ‘Screen Cast’—+Wait for searching—Connect the projectorHotack-Bluetooth-projector- (9)

If there are no search results, click on the ‘Settings’ under ‘Screen Cast’ to display the search results Hotack-Bluetooth-projector- (10)

HOW to use Airplay With projector

Apple iOS devices
Please ensure that Apple devices (iPhone,iPad) and projector are connected the same WiFi

  • Step 1. Please connect the projector and Apple devices to the same WiFi
  • Step 2. Check and make sure that the projector and smartphone are connected to the same WiFi. Then please perform Step 3
  • Step 3. Operations on your iPhone/iPad
    Turn on ‘Screen Mirroring’ → Wait for Searching → Connect the Projector Hotack-Bluetooth-projector- (11)

Switch in the Applications
Click on”My apps”to view installed programs,click program icon to switch between applications. Move to “My Apps”,click OK to enter. All Apps’ can be clearly distinguished from the icons. Hotack-Bluetooth-projector- (13)

Settings
Enter to setup Networking, Bluetooth, Language, Other Setting, Projection, Audio, Date And Time Hotack-Bluetooth-projector- (13)

Networking Setting
Settings – Networking Setting – WIFI setting, WIFI “ON”, select objective WIFI ID and input password to connect internet. Hotack-Bluetooth-projector- (14)

If WiFi usage is abnormal, please turn off the WiFi Setting switch in the upper right corner and then turn it back on

BT Setting
Settings – BT setting, BT “ON”, click Refresh Device and choose objective device to pair. Hotack-Bluetooth-projector- (15)

Language Setting
Settings – Language Setting, enter to setup language and select input method. Hotack-Bluetooth-projector- (16)

Other Setting
Setting – Other Setting, enter to get Application setting, Factory Reset Setting, and Developer opinions. Hotack-Bluetooth-projector- (17)

Projection Setting
Setting – Projector setting, enter to setup projection mode, keystone correction.Hotack-Bluetooth-projector- (18)

Audio Setting
Setting – Audio setting, enter to adjust volume.
Hotack-Bluetooth-projector- (19)

Date And Time Setting
Setting – Date And Time Setting, enter to setup timezone, timeformat, dateformat, date and time.
Hotack-Bluetooth-projector- (20)

Signal
After connecting projector to other output device, enter HD or Audio/Video.

Hotack-Bluetooth-projector- (2)

Safety instructions

  • Please pay attention to important information related to the operation and maintenance of the projector. You should read this information carefully to avoid problems. Following safety instructions will increase the life of projector.
  • Please consult the qualified personnel for installation and repair services, and do not use damaged wires, accessories and other peripherals.
  • Projector should be kept away from flammable, explosive, strong electromagnetic interference (large radar stations, power stations, substations) ,etc. Strong ambient light (avoid direct sunlight), etc.
  • Do not cover projector vents.
  • Please use the original power adapter.
  • Keep adequate ventilation and make sure vents are not covered to avoid projector overheating
  • When projector is working, please do not look directly into the lens, the strong light will flash your eyes and cause slight pain.
  • Do not bend or drag the power cord.
  • Do not put power cord under projector or any heavy objects.
  • Do not cover other soft materials on power cord.
  • Do not heat the power cord.
  • Avoid touching power adaptor with wet hands.

Disclaim

  • This manual is general instructions, The pictures and functions in this manual should subject to the actual product. Our company is devoting to improve product performance, we reserve the right to modify product functions and interface described in this manual without notice.
  • Please keep your device properly. We are not responsible for any loss caused by wrong operation of software/hardware or repairing or any other reasons. We are not responsible for any loss of any third party claims.
  • This manual has been carefully checked by professional engineer, please understand for any inevitable omissions.

Attention:
Please do not look directly into the lens when projecting to prevent the strong light doing harm to your eyes. Kids should use the projector under the supervision of adults.

FCC Notice

The following notice covers the transmitter module contained in this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Documents / Resources

PDF thumbnailBluetooth projector
Instructions · Hotack, projector, bluetooth projector

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.