Hoover CleanSlate Pet Carpet & Upholstery Spot Cleaner Visit User Guide
Hoover CleanSlate Pet Carpet & Upholstery Spot Cleaner Visit

GETTING STARTED

  1. Remove Solution Tank from the unit.
    GETTING STARTED
  2. Add cleaning formula to Solution Tank using the ratio chart in manual and included measuring cup.
    GETTING STARTED
  3. Slide tank back into the unit. Unwrap hose from unit and attach preferred tool.
    GETTING STARTED

HOW TO USE

  1. Spray a generous amount of cleaning formula over stain by pressing the trigger behind the tool
    Spray
    HOW TO USE
  2. Scrub the stain in a back and forth motion until you see bubbles.
    Scrub
    HOW TO USE
  3. Apply downward pressure on the front of the cleaning tool and pull towards you to lift the stain. Repeat as needed.
    Suction
    HOW TO USE

TOOLS FOR EVERY MESS

7in WidePath Tool
Tackle stairs and larger messes in fewer passes.
TOOLS FOR EVERY MESS

Tight Spot Tool
Clean crevices, corners, baseboards and other tough to reach areas
TOOLS FOR EVERY MESS

Hose Rinse Tool
Flush the hose with water to remove any left behind dirt & debris after use
TOOLS FOR EVERY MESS

PRO TIPS

FOR BEST EXPERIENCE: Use formula ratio chart in manual when filling solution tank. Add water before formula.

FOR BEST PERFORMANCE: Empty the tank, flush the hose, and rinse the tools after each use.

WHEN FULL, THERE WILL BE A CHANGE IN OPERATING SOUND: Empty recovery tank promptly

SCAN HERE

For more information on CleanSlate™ or to view this guide in other languages, scan the QR code.QR Code

Documents / Resources

Hoover CleanSlate Pet Carpet & Upholstery Spot Cleaner Visit [pdf] User Guide
CleanSlate, Pet Carpet Upholstery Spot Cleaner Visit

Leave a comment

Your email address will not be published. Required fields are marked *