Honeywell Lynx 3 Mobile Label Printer User Guide

Honeywell Lynx 3 Mobile Label Printer User Guide

www.honeywellaidc.com

Packing List

Standard Accessories

lf any items are damager or missing, please contact the supplier .

Honeywell Lynx 3 Mobile Label Printer User Guide - Packing List

The pictures are for reference only, please subject to practicality.

Appearance & Parts

Front view

Honeywell Lynx 3 Mobile Label Printer User Guide - Front View

Preparation before using

Honeywell Lynx 3 Mobile Label Printer User Guide - Preparation before using

Battery installation

Before product leaving factory. battery has been installed in printer.

  1. Open protection film of battery contacts.
  2. Install battery refer to above diagrams.
  3. Fasten battery.

Honeywell Lynx 3 Mobile Label Printer User Guide - Battery Installation

Printing papered roll installation
  1. Remove the seal of the paper roll
  2. Press the open button to open the paper bin cover
  3. Put the paper roll into the paper bin
  4. Pull out a part of the paper along the exit and close the paper bin cover.

Honeywell Lynx 3 Mobile Label Printer User Guide - Packing List

Battery Charge

Honeywell Lynx 3 Mobile Label Printer User Guide - Battery Charge

Use function

Basic features

Honeywell Lynx 3 Mobile Label Printer User Guide - Basic features

Use function

Setting

Honeywell Lynx 3 Mobile Label Printer User Guide - Use function

Fault diagnosis

Honeywell Lynx 3 Mobile Label Printer User Guide - Fault diagnosis

Maintenance

Printer daily maintenance

Honeywell Lynx 3 Mobile Label Printer User Guide - Printer daily maintenance

Printing paper usage and preservation

Honeywell Lynx 3 Mobile Label Printer User Guide - Printing paper usage and preservation

Product Technical Indicators

Honeywell Lynx 3 Mobile Label Printer User Guide - Product Technical Indicators

Battery recycling

Honeywell Lynx 3 Mobile Label Printer User Guide - Disposal iconThis product adopts Li-on rechargeable battery. In order to protect environment please don’t dispose waste battery at will supplier will provide battery recycling service for you.

Support

To search our knowledge base for a solution or to log into the Technical. Support portal and report a problem, go to www.hsmcontactsupport.com.

Limited Warranty

For warranty information, go to www.honeywellaidc.com and click Get Resources>Product Warranty.

Patents

Fer patent information, see www.hsmpats.com

Disclaimer

Honeywell Lynx 3 Mobile Label Printer User Guide - Disclaimer

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This LNX3 Mobile Printer meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. MODEL: LNX3-0 (FCC ID:HD5-LNX3-0) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for when properly worn on the body is0.162W/kg. This device was tested for typical body-worn operations with the back of the Mobile Printer kept 0 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0 cmseparation distance between the user’s body and the back of the Mobile Printer. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Documents / Resources

Honeywell Lynx 3 Mobile Label Printer [pdf] User Guide
LNX3-0, LNX30, HD5-LNX3-0, HD5LNX30, Lynx 3 Mobile Label Printer, Lynx 3, Mobile Label Printer, Label Printer, Printer
Honeywell Lynx 3 Mobile Label Printer [pdf] User Guide
LNX3-1, LNX31, HD5-LNX3-1, HD5LNX31, Lynx 3 Mobile Label Printer, Lynx 3, Mobile Label Printer, Label Printer, Printer

Leave a comment

Your email address will not be published. Required fields are marked *