Align the front and back base pieces and gently push the halves until the pieces snap securely together.
Securing the tower fan to the base:
At the base of the housing, remove the locking nut and set aside.
Carefully lift the fan housing and place the power cord through the center of the base.
Lower the fan housing into the base.
Take the locking nut and thread the power cord through the locking nut and move the nut up the power cord. Attach the locking nut to the fan housing by turning clockwise (by turning to the Right) until fully tightened.
The fan cord can exit either side of the base; choose which one is closer to your outlet.
The back of this fan is intentionally closed. This allows the air intake and exit to happen at the front grille. This aerodynamic cross-flow design harnesses the Turbo Force® power of your fan!