Zykronix Symphony XL 11.6 Nti Kov Vaj Huam Sib Luag Installation Guide

Zykronix Logo

Symphony XL

Muaj nyob rau hauv lub thawv

  • 1 ib Device
  • 1ea Mounting bracket
  • 4ea Mounting screws

Introduction

Txhawm rau nruab cov cuab yeej koj kuj tseem yuav xav tau ib qho ntawm cov thawv hluav taws xob hauv qab no lossis qis-voltage cov kab.

Electrical Junction Boxes

Cov lus qhia kev nyab xeeb tseem ceeb

Read, understand and follow ALL safety and installation instructions included in this manual. Failure to follow the included documentation may damage the product and will void the manufacturer’s warranty. Follow ALL installation guidelines included with the product. Installation of the product in high humidity environments, in close proximity to heat sources and/or non-recommended locations WILL impede, interfere and/or damage the intended operation of the product. Only use attachments and accessories which have been specified for use by the manufacturer. The use of abrasive, liquid or solvent-based cleaning fluids WILL damage the product. Product Servicing may ONLY be completed by authorized or certified service centers & personnel. For a complete list of product servicing options, please follow instructions included in the product documentation and/or contact the original manufacturer for details.

Cov khoom siv no tau sim thiab pom tias ua raws li qhov kev txwv rau ib chav Class B digital device, ua raws li ntu 15 ntawm FCC Cov Cai.

Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev ua kom muaj kev cuam tshuam tsis zoo hauv kev teeb tsa hauv chaw nyob. Cov khoom siv no tsim tawm, siv thiab tuaj yeem tshaj tawm cov xov tooj cua hloov lub zog thiab, yog tias tsis ntsia thiab siv ua raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam tsis zoo rau xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov khoom siv no ua rau muaj kev cuam tshuam tsis zoo rau xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm tig cov cuab yeej tawm, thiab cov neeg siv raug txhawb kom sim kho qhov kev cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:

  • Kho dua tshiab lossis rhais chaw ntawm lub kav hlau txais xov.
  • Ua kom kev sib cais sib txawv ntawm cov khoom siv thiab tus txais.
  • Txuas cov khoom siv rau hauv qhov hluav taws xob ntawm qhov hluav taws xob tsis zoo ib yam los ntawm kev sib txuas uas tus tau txais.
  • Nrog tus tswv lag luam lossis tus xov tooj cua / TV paub txog kev pab kom pab.

Ntaus - Tshajview

Nyobview

Note: Only Symphony XL equipped with hue lights.

Npaj lub installation

The device is designed to be wall mounted in either Portrait or Landscape orientation, or on tabletop with stand.

Npaj lub installation

Txhim kho lub ntaus ntawv

Txhim kho lub ntaus ntawv

A. Mounting height

The recommended mounting height for the device is 57”- 65” (145 cm -165 cm) from the finished floor to the center of the unit.

B. Landscape/Portrait mounting

Device can be mounted and oriented in Portrait or Landscape.

C. Installing the device mounting bracket

The device package includes a stainless steel mounting bracket that MUST be used for installation. Please note the mounting bracket in the box is designed for the US standard 2-gang and supplied Arlington mounting ring supplied in the box. You can order additional stainless steel mounting brackets for UK or European electrical boxes. Verify that the bracket is level before tightening the captive screws on the device. (US mounting bracket included in the box)

Txhim kho lub cuab yeej mounting bracket

D. Connecting the device to power

Cov cuab yeej tsim los siv rau kev sib txuas Ethernet (PoE) lossis los ntawm kev sib txuas 24Vdc fais fab mov (tsis suav nrog), tab sis tsis yog ob qho tib si. Yog tias ob qho tib si PoE thiab 24Vdc fais fab mov txuas nrog, lub cuab yeej yuav rub lub zog los ntawm 24V DC qhov chaw.

Kev sib txuas PoE

PoE kev sib txuas yuav tsum tau IEEE 802.3af tus qauv. Siv lub network hloov lossis PoE injector uas ua tau raws li tus qauv no. Txuas lub cuab yeej siv tus qauv T568A lossis T568B Ethernet cable los ntawm lub network hloov mus rau LAN / PoE jack nyob tom qab ntawm lub cuab yeej.

Kev sib txuas PoE

24V DC Lub Hwj Hwj Hwj

Koj tuaj yeem muab lub zog hauv zos lossis nyob deb ntawm lub cuab yeej los ntawm kev siv 24V DC fais fab mov (tsis suav nrog). Thov nco ntsoov tias khiav cov hlau los ntawm phab ntsa raws li cov cai hauv zos thaum fais fab hauv zos. Yog hais tias lub hwj chim nyob deb, thov xyuas kom siv cov xaim ntawm qhov ntsuas txaus rau qhov ntev ntawm kev khiav. Thov siv kev pom zoo 24V DC fais fab mov.

Tshawb xyuas qhov polarity ntawm lub chim connector ntawm koj lub hwj chim mov ua ntej txuas mus rau lub cuab yeej. Lub hauv paus tus pin ntawm lub tshuab fais fab txuas yog qhov zoo thiab lub nplhaib sab nraud yog qhov tsis zoo. Yog tias cov xaim txuas ntxiv, thov xyuas kom meej tias txoj kev ua raws li cov cai hauv zos.

Txuas lub connector rau hauv lub cuab yeej DC jack nyob tom qab ntawm lub cuab yeej.

Plug the connector into the device

Powering up the device

Powering up the device

The device will automatically power on when power is applied. Wait for the unit to boot up. When it’s connected to a network switch by Ethernet cable, the device will acquire a network address via DHCP and automatically connect to the system.

Temperature ranges/humidity

Kub

E. Mounting the device

  1. Loosen the captive screws of the unit first. Screws should not be moved apart from the unit. Please meet the indicated line.
  2. Teem lub mounting ncej hooks nrog lub mounting slots thiab maj mam rub lub tsev nyob rau hauv lub mounting bracket. Xyuas kom tseeb tias cov mounting hooks tau koom nrog zoo.
  3. Txhawm rau ua kom tiav qhov kev teeb tsa, nruj 2-kab screws nyob rau hauv qab ntawm chav tsev, kom ruaj ntseg cov cuab yeej ntawm lub mounting bracket.
  4. For Portrait orientation, rotate mounting bracket and 90 degrees in counterclockwise direction before installation.

Mounting lub ntaus ntawv

Tshem tawm lub cuab yeej

Siv lub precision Philips lub taub hau ntsia hlau tsav tsheb kom loosen 2-captive screws ntawm lub cuab yeej, ces me ntsis rub ncaj nraim ntawm lub mounting ncej kom disengage lub tsev.

Tshem tawm lub cuab yeej

Teeb tsa qhov screen orientation

Ntawm lub vijtsam kov lub teeb tsa, xaiv Landscape lossis Portrait zaub hom. Nias Start ntaus ntawv kom tso tus neeg siv interface.

Hloov kev taw qhia:

Teeb tsa qhov screen orientation

  • Tshem tawm lub zog ntawm lub cuab yeej.
  • Rov ua dua lub zog rau lub cuab yeej.
  • Xaiv toj roob hauv pes lossis portrait orientation.

Thank you for including the device as part of the user interface strategy for your customer. The device has been designed to provide years of trouble free operation when wired and installed properly. The device is designed for installation in low humidity indoor environments and should never be installed outdoors or in high humidity areas.

Ib qho hloov pauv lossis hloov kho uas tsis tau pom zoo pom zoo los ntawm tus neeg tau txais cov cuab yeej no yuav ua rau tus neeg siv txoj cai ua haujlwm ntawm cov khoom siv.
Cov cuab yeej siv no ua raws li Ntu 15 ntawm FCC Cov Cai. Kev ua haujlwm yog raug rau ob qho xwm txheej nram qab no: (1) cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam tsis zoo, thiab (2) cov cuab yeej no yuav tsum lees txais txhua yam cuam tshuam uas tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis tsim nyog.

RF ceeb toom
Cov cuab yeej no yuav tsum tau teeb tsa thiab ua haujlwm raws li cov lus qhia thiab cov kav hlau txais xov (s) siv rau lub tshuab xa khoom no yuav tsum tau teeb tsa kom muab qhov sib nrug deb tsawg kawg 20 cm los ntawm txhua tus neeg thiab yuav tsum tsis txhob nyob ua ke lossis ua haujlwm nrog lwm lub kav hlau txais xov lossis xa tawm. Cov neeg siv kawg thiab cov neeg teeb tsa yuav tsum tau muab cov lus qhia txhim kho kav hlau txais xov thiab xa cov haujlwm ua haujlwm kom txaus siab rau RF ua raws.

Canada, Kev Lag Luam Canada (IC) Kev Ceeb Toom
Cov cuab yeej no ua raws li Canada daim ntawv tso cai-tsim RSS tus qauv (s).
Kev ua haujlwm yog raug rau ob qho xwm txheej hauv qab no: (1) cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam, thiab (2) cov cuab yeej no yuav tsum lees txais txhua yam cuam tshuam, suav nrog kev cuam tshuam uas yuav ua rau tsis ua haujlwm ntawm lub cuab yeej.

Consult the dealer or contact [email tiv thaiv] rau kev pab 

English V1.1

Cov ntaub ntawv / Cov ntaub ntawv

Zykronix Symphony XL 11.6 Inch Touch Panel [pdf] Installation Guide
LBEE5ZZ1PJ, 2AGRR-LBEE5ZZ1PJ, 2AGRRLBEE5ZZ1PJ, Symphony XL 11.6 Inch Touch Panel, Symphony XL, 11.6 Inch Touch Panel

Cia ib saib

Koj email chaw nyob yuav tsis tsum luam tawm.