Tranya S2 Smart Watch User Manual

Tranya S2 Smart Watch

TAU TXAIS pIB

Daim Ntawv Teev Npe

Replace The Band

1. Side button: Power on/off; Back to the last interface
2. Side button: Power on; Switch to training interface

Yog tias koj yuav cov bands tshiab thiab xav hloov, ua ntej, tig qhov hloov pauv thiab tshem tawm lub dab teg, tom qab ntawd khaws cov hlua uas koj nyiam, thiab hloov pauv mus rau qhov kawg ntawm lub moos kom txog thaum koj hnov ​​​​ib nyem thiab tom qab ntawd snaps rau hauv qhov chaw. .
Nco ntsoov: Pay attention to the position of the long and short band and the display screen, do not install them upside down.

Them koj qhov Saib

• Txuas lub USB-them cable nrog lub saib raws li daim duab.
• Thaum lub cuab yeej txuas nrog lub hwj huam mov, nws yuav vibrate.

Hnav

Hnav cov cuab yeej nrog tus ntiv tes nyob deb ntawm lub dab teg ntawm pob txha thiab kho qhov nruj ntawm lub dab teg mus rau qhov chaw xis nyob.

Lub Hwjchim On / Off

1. Ntev nias lub khawm ntawm sab xis sab sauv rau 4-5 vib nas this kom lub zog rau. Los yog them nws rau lub hwj chim.
2. Hloov mus rau Off interface, thiab nias nws kom lub hwj chim tawm. Los yog nias lub pob ntawm sab xis rau 4-5 vib nas this hauv lub ntsiab interface kom lub hwj chim tawm.

Nruab Ib Lub App

1. Open your App store and search “GloryFit” to install.
2. Or scan the following QR codes to install “GloryFit”. The QR code can be found in the Setting.
   

Device requirement iOS 9.0 And Above, Android 4.4 Above to support Bluetooth 4.0..

Personal Information and exercise goals

1. Qhib App GloryFit los teeb tsa koj cov ntaub ntawv ntiag tug.
2. Setting your avatar, name, gender, age. height and weight, which can help to increase the accuracy of the monitoring data.
3. Teem koj lub hom phiaj kev tawm dag zog txhua hnub.

Ntaus ntawv txuas

Before connecting, ensure the following matters.

1. Lub moos tsis txuas ncaj qha rau Bluetooth ntawm lub xov tooj ntawm tes. Yog tias muaj, thov rho tawm "S2" los ntawm cov npe Bluetooth ntawm koj lub xov tooj ntawm tes.
2. The watch is not connected to other mobile phones. If so, please unbind the watch from other mobile phones. If the original phone is an iOS system, you also need to delete the “S2” from the Bluetooth List of the phone).
3.  Qhov kev ncua deb ntawm lub xov tooj ntawm tes thiab lub moos yuav tsum tsawg dua 1m.

Then follow the below steps to connect your smart watch

Kauj ruam 1: Turn on the Bluetooth in your phone:
Kauj ruam 2: Open the “GloryFit in your phone;
Kauj ruam 3: Click “Device”; Step 4: Click “Add a new device”;
Kauj ruam 5: Nyem "Xaiv ntaus ntawv";
Kauj ruam 6: Select the product model – S2
Kauj ruam 7: Click “Pair to complete the connection
Nco ntsoov: If you can’t find “S2 in steps, please check whether the device has been selected in the Bluetooth list of your mobile phone. If so please click “Ignore S2′ and search again.

lag luam

1. Tsa koj txhais tes lossis khawm ntawm sab xis sab xis kom pom qhov screen.
2. The screen will turn off without operations in 10 seconds by default. You can modify this default value in the smart watch.
3. Lub plawv ntsuas ntsuas muaj nuj nqi yog nyob ntawm lub neej ntawd. Koj tuaj yeem tua nws hauv GloryFit.
4. Cov ntshav oxygen ua haujlwm tsis raug los ntawm lub neej ntawd. Koj tuaj yeem qhib nws hauv GloryFit.
5. Nias lub pob nyob rau sab xis ntawm txhua lub sijhawm kom rov qab los.

Cov ntaub ntawv synchronism

Lub moos tuaj yeem khaws 7 hnub ntawm cov ntaub ntawv off-line, thiab koj tuaj yeem synchronize cov ntaub ntawv ntawm App homepage manually. Cov ntaub ntawv ntau dua, lub sijhawm synchronization ntev dua, thiab lub sijhawm ntev tshaj yog li 2 feeb.

GloryFit App ua haujlwm thiab teeb tsa

Kev ceeb toom

1. Hu xov tooj ceeb toom
   Koj muaj peev xwm ib-nias lub liab icon rau dai hu.
2. SMS ceeb toom
3. App ceeb toom
   You can add reminders of App messages in the GloryFit, such as Twitter, Facebook, WhatsApp. Instagram thiab lwm yam ntawv thov.
   

Nco ntsoov:

1. Be sure to turn on both of the functions and their permissions in the GloryFit
2. The watch only can display 80 characters for IOS and Android per message.
3. Yog tias koj lub moos tsis tau txais cov lus, thov xa mus rau FAQ tom kawg ntawm phau ntawv.
   

Kev noj qab haus huv ntawm lub cev

1. Kev soj ntsuam lub plawv dhia
   Lub plawv ntsuas ntsuas muaj nuj nqi yog nyob ntawm lub neej ntawd. Koj tuaj yeem tua nws hauv GloryFit.
   
2. Kev ntsuas ntshav oxygen
   The blood oxygen function is off by default. You can turn it on in the GloryFit. You can set the time and period of blood oxygen monitoring according to your needs. 1-H is the recommended cycle for blood oxygen monitoring.
   Nco ntsoov: Kev saib xyuas lub plawv dhia yuav raug ncua thaum saib xyuas cov ntshav oxygen, thiab rov ua dua.
3. Piav daim ntawv ceeb toom
   Koj tuaj yeem teem sijhawm pib, lub sijhawm kawg thiab lub sijhawm ceeb toom ntawm kev ceeb toom sedentary raws li koj xav tau.
   
4. Physiological voj voog
   Poj niam muaj nuj nqi tsuas yog muaj tom qab koj ua tiav cov kauj ruam hauv qab no hauv GloryFit.
   Physiological Cycle-Sau hauv koj cov ntaub ntawv lub sijhawm-Pib
   

Kev Ua Haujlwm dav dav

Nco ntsoov: For the following operations, the word expressions of iOS and Android systems will be a little different.

1. Ralse hand to activate display
   The function raise hand to activate display is on by default. You can turn it off in the GloryFit. You can also set the time for the bright screen to 5s/10/15s on the smart watch,
   Menu-Settings-Screen time.
   
2. Tsis txhob cuam tshuam
   You can set the start and end time of “Do not disturb mode according to your needs.
   Nco ntsoov: When you turn on the “Do not disturb” mode, the “raise hand to activate display” and message notification function are unavailable.
   
3. Lub sij hawm
   Hauv: Ntaus -Universal nqis-Lub Sijhawm system-Xaiv 12-teev system lossis 24-teev system
   iOS no Device-More settings24-Hours Time on/off)
   
4. Tsev
   Android Device – Universal settings-Unit-Select Metric system or British system
   lub ibfile-Setting Unit
   
5. Temperature unit conversions *C/°F
   Kauj ruam 1: Click the weather icon in the upper left corner of the “Home interface: Step 2: Choose C/°F which is in the upper right corner of the weather interface.

ntau

1. Kauj Ruam Ua tiav Kev Ceeb Toom
   You can set a target step number in the GloryFit. When you reach this target, the smart watch will shake three times to remind you that you have completed the goal,
2. Firmware txawj tej yam ntxiv
   Yog tias koj raug ceeb toom kom hloov kho lub software, thov hloov kho nws raws sijhawm.
   Nco ntsoov: Thov them tag nrho lub moos ua ntej hloov kho. Yog tias lub roj teeb tsawg dua 30%, kev hloov kho yuav ua tsis tiav.

Kev taw qhia yooj yim

The home screen is the clock

1. Swipe down to see the quick settings, such as Do Not Disturb. Brightness, Find the Phone Setting.
2. Swipe up to see the notifications,
3. Swipe right to see the menu on your watch
4. Swipe left to see the shortcut interfaces, such as Status, Heart rate, Sleep, Weather
5. Press the button on the upper right to return.

Nplooj ntawv tseem ceeb muaj nuj nqi

• Weather and temperature
• Calorie
• Day,Date -Time
• Steps – Distance Sleep time
• Lub plawv dhia
• Qeb roj teeb

Hloov lub ntsej muag saib

1. Ntev nias lub ntsiab interface rau 4-5 vib nas this los hloov.
2. Or (Setting -Dial) to switch.
   Nco ntsoov: Koj tuaj yeem xaiv ntau lub ntsej muag hauv Dash Board of GloryFit.

Cov xwm txheej interface

Switch to the Status interface to check the steps, distances and calories. The distances and calories are calculated based on the current walking steps, the height and weight set in the App individually.

Kev cob qhia interface

Hloov mus rau Kev cob qhia interface, nias lub vijtsam kom nkag mus rau qhov kev cob qhia tshwj xeeb. Nias lub pob nyob rau sab xis sab xis kom nres, koj tuaj yeem xaiv seb yuav txuas ntxiv lossis tawm mus.

Heart Interface

Hloov mus rau lub plawv interface, nyem qhov screen rau view cov ntaub ntawv lub plawv dhia.

Nco ntsoov:

1. Kev saib xyuas lub plawv dhia yog qhib los ntawm lub neej ntawd. Yog tias koj tsis xav tau txoj haujlwm no, koj tuaj yeem tua nws hauv "GloryFit App.
2. If the heart rate monitoring function is on the green light on the back of the watch will keep flashing.
3. If you find that the heart rate data is inaccurate, please pay attention to the following matters: 111 Wear the watch with moderate tightness, and the sensor behind the watch should be close to the skin 21 Switch to the corresponding sports mode when exercising: (31 If it is still inaccurate, please reboot the watch.

Ntshav oxygen interface

Hloov mus rau Ntshav oxygen interface thiab ntsuas koj cov ntshav oxygen qib txhua lub sijhawm.

Nco ntsoov:

1. Heart rate monitoring will be suspended when monitoring blood Oxygen, and vice versa.
2. Txhawm rau ua kom cov ntshav oxygen cov ntaub ntawv raug ntau dua, thov xyuas cov teeb meem hauv qab no thaum saib xyuas:
   1. Ambient temperature is above 25*C, 12)
   2. Keep your wrists fiat on the table without moving.

Respiration rate interface

Hloov mus rau qhov kev ua pa ntawm lub ntsej muag thiab sim koj li kev ua pa txhua lub sijhawm.

Breathing training Interface

Hloov mus rau qhov kev cob qhia ua pa interface thiab ua kom muaj kev cob qhia ua pa raws li kev qhia ntawm lub moos. Koj tuaj yeem kho lub sijhawm kawm thiab nrawm raws li koj xav tau.

Pressure Interface

Hloov mus rau lub siab interface thiab nws tsuas yog siv peb feeb los saib xyuas koj lub siab.

Suab paj nruag interface

Koj tuaj yeem ua si, nres lossis hloov cov lem ua si hauv koj lub xov tooj ntawm tes.

Pw tsaug zog interface

Switch to the Sleeping interface and check the sleep status, Sleep data is mainly based on heart rate and wrist movement range. When you are asleep, the heart rate will decrease significantly
Nco ntsoov:

1. Falling asleep between 6 a.m. and 6 pm is not recorded.
2. Thaum koj pw hauv txaj thiab ua si nrog koj lub xov tooj ntev, koj lub plawv dhia thiab lub dab teg zoo li lub xeev ntawm kev pw tsaug zog. Lub moos yuav txiav txim siab tias koj tsaug zog.

Weather Interface

Hloov mus rau Huab Cua interface, koj tuaj yeem ua tau view huab cua thiab kub.
Nco ntsoov: Weather function is only available after you turn on the “Location of the mobile phone.

Lus interface

Hauv Message interface, nyem qhov screen loj rau view the message, slide the screen to turn the pages, Press the button on the upper right to exit.

Nco ntsoov: Message remind is just a function to remind you to receive the message. Its display interface will have character restrictions 80 characters for iOS and Android per message.

Poj niam noj qab haus huv interface
Through the App you can record your personal menstrual cycle and predict the safety period, pregnancy and ovulation period, which can help women.

ntau

• Lub tsheb tos neeg.
  Hloov mus rau Stopwatch interface, nyem rau nkag mus rau lub sijhawm sib tham.
• Sijhawm:
  Switch to the Timer interface, and click to choose the time you page. When the time is up, the watch will vibrate.
• Nrhiav kuv:
  Switch to the Find me interface and touch the icon, then the phone will ring,
• Lub teeb khoo:
  Hloov mus rau lub teeb nyem interface, thiab nias lub vijtsam kom qhib lub teeb nyem.

chaw

App Download: Scan the Qr code to install the app “Gloryfit”.

Ceev faj

1. Thov tsis txhob muaj kev cuam tshuam muaj zog, huab cua kub thiab raug rau lub moos.
2. Thov tsis txhob disassemble, kho lossis hloov lub cuab yeej ntawm nws tus kheej.
3. Kev siv ib puag ncig yog 0 degrees -45 degrees, thiab nws yog txwv tsis pub muab pov rau hauv qhov hluav taws kub kom tsis txhob ua rau tawg.
4. Thov so cov dej nrog cov ntaub mos muag thiab tom qab ntawd lub moos tuaj yeem siv rau kev ua haujlwm them nyiaj, txwv tsis pub nws yuav ua rau corrosion ntawm qhov chaw them nyiaj thiab qhov xwm txheej them yuav tshwm sim.
5. Tsis txhob kov cov tshuaj xws li roj av, tshuaj ntxuav dawb, propanol, dej cawv lossis tshuaj tua kab.
6. Please do not use this product in high pressure and high magnetic environment
7. If you have sensitive skin or tighten the wristband, you may feel discomfort able.
8. Thov so cov hws tawm ntawm lub dab teg hauv lub sijhawm. Cov pluaj muaj kev sib cuag ntev ntev nrog xab npum, hws, kev ua xua lossis cov khoom ua paug qias neeg, uas yuav ua rau khaus tawv nqaij ua xua.
9. it is often used, it is recommended to clean the wristband every week. Wipe with wet cloth and remove oil or dust with mild soap. It is not
   appropriate to wear a hot bath with a wristband. After swimming, please wipe the wristband in time so as to keep dry.

Yooj yim parameter

FAQ

Q: Kuv yuav ua li cas thaum kuv lub moos tsis tuaj yeem txuas nrog lub xov tooj ib txwm?
A: Please follow the instructions:

1. Install the “GloryFit App in Google Play or App store and allow all authorizations required by GloryFit.
2. Make sure both of your watch and mobile phone Bluetooth are turned on. And it would be better that the distance between the mobile phone and the watch is less than 1m.
3. If the watch is not connected to the mobile phone through the GloryFit App, but directly through the Bluetooth search, please delete the watch “S2” from the Bluetooth list of your mobile phone.
4. It you want to connect to another new phone, please unbind the watch on the original phone through the GloryFit App first lf the original phone is an 105 system, you also need to delete the watch S2 from the Bluetooth list of the phone).

Q: Vim li cas lub moos tsis tuaj yeem txais SMS / App cov ntaub ntawv ceeb toom?
A: Please follow the instructions:

1. Make sure that you have authorized the SMS/Apo notification for the Gloryfit App
2. Xyuas kom meej tias lub moos txuas nrog lub xov tooj ntawm tes los ntawm GloryFit App.
3. Make sure “Do not disturb mode on the watch is turned off,
4. Ensure that the SMS reminder and App reminder of the GloryFit App are turn on.
5. Nco ntsoov tias koj lub GloryFit App yeej ib txwm khiav hauv keeb kwm yav dhau.
   Nco ntsoov: Some Android phones automatically close Apso running in the background every 10-15 minutes. If GlaryFit App is stopped by the system, the watch will not receive any information notification. You can keep the GloryFit App running in the background through “Setting in your phone. If you don’t know how to set it, you can search your mobile phone brand how to keep the App running in the background? on Google.

Q: Why is the time and weather on the watch incorrect?
A: The time and weather of the watch are synchronized with your smart phone.

1. Thov nco ntsoov tias koj lub moos tau txuas nrog koj lub xov tooj los ntawm GloryFit App, thiab ua kom GloryFit khiav.
2. At the same time, the “Location of your mobile phone is turned on.

Q. Is the sleep data accurate?
A- Sleep data is accurate, Sleep data is mainly based on heart rate and wrist movement range. When you are asleep, the heart rate will decrease significantly. When you are lying in bed and playing with your phone for a long time, and your heart rate and wrist movements are similar to the state of sleep, the watch may determine that you are asleep. However, the third-generation algorithm of our watch has fixed this problem. Note: Falling asleep between 6 am, and 6 p.m. is not recorded.

Q: Kuv tuaj yeem ua kom kuv lub plawv dhia nrawm dua li cas?
A: (1) Wearing the watch with moderate tightness, and the sensor behind the watch should be close to the skin. 12) Switch to the corresponding sports mode when exercising.

Q: Is the watch waterprool?
A: It supports 3ATM waterproof and dust-proof level 3ATM standard is 30 meters below waterl. Usually, you can wash your hands with the smart watch. Note: But be sure not to enter the steam room with your watch. Such as sauna, hot spring, hot bath, etc.

Yog xav paub ntxiv, thov mus saib: tranya.com
Rau txhua qhov kev pabcuam, email rau peb: support@tranya.com

Tau nyob rau hauv Tuam Tshoj
FC CE ROHS

EU REP SkyLimit Service GmbH Rowdingsmarki 20 20457 Hamburg
UK AR HUA TENG LIMITED 3 Glass Street, Hanley Stoke On Trent ST12ET United Kingdom

Siv Thiab Ua:

Lub npe: Huizhou Xiansheng Technology Co., LTD
chaw nyob: 3rd Floor, Workshop No. 2. Yunhao High-tech Park, Yuhe Road, Sanhe Town, Hulyang Economic Development Zone, Huizhou, China

FCC daim ntawv qhia

ACC
Interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CEEB TOOM: Cov cuab yeej siv no tau sim thiab pom tias ua raws li qhov kev txwv rau ib hoob B cov khoom siv digital, ua raws Ntu 15 ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev ua kom muaj kev cuam tshuam zoo hauv kev teeb tsa hauv thaj chaw. Cov khoom siv no tsim tawm, siv thiab tuaj yeem tshaj tawm cov xov tooj cua hloov lub zog thiab, yog tias tsis ntsia thiab siv ua raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam tsis zoo rau xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov khoom siv no ua rau muaj kev cuam tshuam tsis zoo rau xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm tig cov cuab yeej tawm, thiab cov neeg siv raug txhawb kom sim kho qhov kev cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:

• Kho dua tshiab lossis rhais chaw ntawm lub kav hlau txais xov.
• Ua kom kev sib cais sib txawv ntawm cov khoom siv thiab tus txais.
• Txuas cov khoom siv rau hauv qhov hluav taws xob ntawm qhov hluav taws xob tsis zoo ib yam los ntawm kev sib txuas uas tus tau txais.
• Nrog tus tswv lag luam lossis tus xov tooj cua / TV paub txog kev pab kom pab.

Lub cuab yeej no thiab nws lub kav hlau txais xov yuav tsum tsis txhob sib koom ua ke lossis kev ua haujlwm ntawm kev sib txuas nrog lwm lub kav hlau txais xov lossis lub tshuab xa khoom.

Cov Lus Tshaj Txog Hluav Taws Xob
Cov cuab yeej tau raug tshuaj xyuas kom ua tau raws li qhov xav tau ntawm RF qhov xav tau nyob rau hauv lub cev raug mob yam tsis muaj kev txwv.

ISED tsab ntawv
Cov cuab yeej no muaj cov khoom xa tawm uas tsis muaj ntawv tso cai / cov khoom txais (cov) uas ua raws li Innovation, Kev Tshawb Fawb thiab Kev Txhim Kho Tebchaws Canada kev tso cai muab ntawv tso cai RSS (s). Kev ua haujlwm yog raug rau ob nqe lus hauv qab no:

1. Cov cuab yeej no yuav tsis ua kom muaj kev cuam tshuam.
2. Lub cuab yeej no yuav tsum lees txais ib yam kev cuam tshuam, suav nrog kev cuam tshuam uas yuav ua rau lub lag luam tsis tsim nyog.

Cov cuab yeej no ua tau raws li qhov kev zam los ntawm cov kev ntsuas niaj hnub txwv hauv ntu 2.5 ntawm RSS 102 thiab ua raws li RSS 102 RF raug, cov neeg siv tuaj yeem tau txais cov ntaub ntawv Canadian ntawm RF raug thiab ua raws.

Cov cuab yeej no ua raws li Canada kev txwv tsis pub muaj hluav taws xob tau teeb tsa rau qhov chaw tsis muaj kev tswj hwm.
Cov cuab yeej tau raug soj ntsuam kom ua tau raws li qhov yuav tsum tau muaj kev cuam tshuam RF. Cov cuab yeej no yuav tsum tau nruab thiab ua haujlwm nrog qhov tsawg kawg nkaus nrug 0mm ntawm lub radiator & koj lub cev.

Cov ntaub ntawv / Cov ntaub ntawv

Tranya S2 Smart Watch [pdf] Tus neeg siv phau ntawv S2, 2A4AX-S2, 2A4AXS2, Smart Watch, S2 Smart Watch