Ss brewtech FTSS-TCH FTSs Touch Display Controller

TshajVIEW

Nyob rau hauv lub thawv

SYSTEM THIABVIEW

Lub hauv paus ntsiab lus tseem ceeb ntawm Fermentation Temperature Stabilization System (FTSs) yog txhawm rau tso cov kua qaub glycol sib xyaw lossis dej los ntawm cov txheej txheem immersion thaum qhov kub ntawm koj cov wort yog siab dua li qhov ntsuas kub. Thaum lub kaw lus tau tsim los siv nrog peb cov Ss Glycol Chillers, nws kuj tseem siv tau nrog cov dej khov nab kuab hauv qhov txias txias. Yog tias siv dej khov rau hauv lub txias txias, lub twj tso kua mis submersible yuav muab tso rau hauv qab ntawm lub txias txias.

Lub FTSs yog npaj los ua lub kaw lus kaw kaw qis qis. Dej los yog glycol pumped los ntawm lub cooler mus rau lub fermenter yog ces rov qab mus rau lub txias kom siv dua. Yog tias koj qhov teeb tsa xav tau ntau qhov kev ncua deb ntawm lub fermenter mus rau lub txias txias, koj tuaj yeem yuav cov raj yas hauv ntau lub khw muag khoom kho vajtse. Nco ntsoov, tias kev tso dej dhau 10 ko taw yuav cuam tshuam tsis zoo rau kev ua haujlwm.

Lub FTSs Kov | Cua sov Pad yog ib qho khoom siv yeem (muag nyias). Hauv Chilling & Cua sov hom, tus maub los yuav qhib lub watt qistage cua sov ncoo thaum qhov kub ntawm koj cov kua yog tsawg tshaj li tus maub los lub teeb temp. Convective tshav kub hloov yuav tshwm sim nyob rau hauv cov kua kom txog thaum nws kub mus txog rau qhov xav tau teem temp. Cov yam ntxwv tseem ceeb no ua kom cov chaw kub tsis muaj nyob hauv lub fermenter, uas tuaj yeem cuam tshuam tsis zoo rau fermentation.

CONTROLER ASSEMBLY 

1. Tshem cov khoom los ntawm kev ntim khoom.
2. Nruab Kov Zaub ntawm Zaub Stand lossis TC Display Mount. (Saib nplooj 4 rau TC Display Mount installation graphics)

Cov lus qhia

• Txuas Txuas Node Adapter rau Zaub.
• Txuas Temp Probe rau Kev Sib Txuas Node Adapter. CEEB TOOM: Txhawm rau kom lub neej ntev, khaws qhov ntsuas kub kom tsis txhob sib cuag nrog cov tshuaj tua kab mob ntev ntev thiab xyuas kom lub thermowell qhuav tag ua ntej txhim kho koj qhov kev sojntsuam lossis kev puas tsuaj rau qhov kev sojntsuam yuav tshwm sim. Tsis txhob tso dej rau qhov ntsuas kub hauv cov tshuaj tua kab mob lossis lwm yam dej ntxuav.
• Siv Thermowell Npog rau koj lub tank lub thermowell thiab ntxig rau qhov ntsuas kub.
• Txuas Faib Fais Fab rau Kev Sib Txuas Node Adapter (Ceeb Toom: Tsis txhob txuas fais fab mov mus rau qhov chaw fais fab kom txog thaum Kauj Ruam 10 thiab teeb tsa tiav).
• Txuas FTSs Pump mus rau Kev Sib Txuas Node Adapter.
• Yeem - Txuas FTSs cua sov ncoo rau qhov txuas Node Adapter.
• Qhwv Cable Straps nyob ib ncig ntawm cov xaim kom cov cables zoo.
• Plug hauv Power Supply rau lub hwj chim. FTSs Touch Display yuav tsum qhib.

PUMP ASSEMBLY

1. Muab lub twj tso kua mis silicone tso rau ntawm qhov chaw nres nkoj ntawm lub twj tso kua mis submersible.
   CEEB TOOM: Yog tias siv Ss Glycol Chiller, siv Ss Glycol Chiller Quick Start Guide rau cov lus qhia sib dhos nrog lub hau Glycol Chiller.
2. Faib cov vinyl tubing rau hauv ob qhov sib npaug. Txuas ib kawg ntawm ib lub raj mus rau lub qhov hluav taws xob submersible thiab ruaj ntseg nrog lub hose clamp. Lub qhov hluav taws xob lub twj tso kua mis yog cov yeeb nkab me me txuas rau sab saum toj ntawm lub twj tso kua mis. Txuas rau lwm qhov kawg ntawm tib lub tubing mus rau lub immersion kauj thiab ruaj ntseg nrog ib tug thib ob hose cl.amp. Nqa cov seem ntawm cov tubing thiab txuas mus rau lwm qhov kawg ntawm lub immersion kauj thiab ruaj ntseg nrog peb hose cl.amp thiab tom qab ntawd muab qhov kawg ntawm lub raj xa rov qab rau hauv glycol chiller (los yog dej khov da dej).
3. Lub twj tso kua mis qis rau hauv glycol phiab (los yog dej khov da dej).
4. Khiav ump fais fab cable sab nraum lub glycol phiab (los yog dej khov da dej).

Cov lus qhia ua haujlwm

THAUM LUB SIJ HAWM SETUP SCREEN

Thaum lub kaw lus qhib rau thawj zaug, koj yuav pom lub vijtsam teeb tsa thawj zaug uas yuav cia koj xaiv ntawm Fahrenheit lossis Celsius thiab qhia yog tias koj muaj FTSs Cua sov ncoo ntsia. Cov kev teeb tsa no tuaj yeem hloov pauv tom qab los ntawm lub vijtsam teeb tsa yog li xaiv cov kev xaiv uas ua haujlwm zoo tshaj rau koj thiab tom qab ntawd xaiv "COMPLETE SETUP". Koj yuav tsis pom qhov screen no dua yog tias koj lub Hoobkas pib dua koj tus maub los.

Pib UP SCREEN

Thaum lub kaw lus yog powered on, koj yuav pom lub Start Up Screen. Los ntawm qhov kev tshuaj ntsuam no, koj tuaj yeem pib fermentation ntawm koj lub hom phiaj kawg los yog teem caij kub.

1. Xaiv "SET TEMPERATURE" los yog coj mus rhaub tus nqi kub ntawm lub Start Up Screen.
2. Kho nce lossis nqis raws li xav tau.
3. Xaiv tus Rov Qab Xub “←” ntawm lub Start Up Screen.
4. Xaiv "START FTSs" los pib ua haujlwm.

HLOOV SET TEMP

1. Xaiv "SET TEMP" lossis coj mus rhaub tus nqi kub ntawm lub ntsiab Temp Control Screen.
2. Kho nce lossis nqis raws li xav tau.
3. Xaiv tus Xa Rov Qab "←" ntawm Ferment Temp Screen.
   Qhov no yuav txuag tau qhov kub thiab txias.

PAUSE & RESUME TEMPERATURE CONTROL

1. Thaum lub sijhawm ua haujlwm thaum nyob rau ntawm lub ntsiab Temp Control Screen, koj tuaj yeem xaiv "PAUS" kom nres lub kaw lus thiab xaiv "RUN" kom rov ua haujlwm.

CEEB TOOM USER TEMPERATURE Presets

Thaum teeb tsa qhov kub thiab txias (ntawm ob qho FERMENT TEMP thiab CRASH TEMP hom) muaj 3 qhov programmable kub presets rau koj yooj yim.

1. Txhawm rau ua qhov preset, kho qhov kub thiab txias li qhov xav tau.
2. Xaiv thiab tuav lub thawv xav tau preset rau 5 vib nas this. Lub vijtsam yuav ntsais thiab txuag lub preset.

Hloov ntawm fermentation thiab Crash TEMP MODE

Thaum fermentation tiav lawm, koj tuaj yeem xaiv ua qhov txias txias txhawm rau pab txhim kho qhov pom tseeb ntawm koj cov npias. Txias crashing yog tus txheej txheem ntawm txo qhov kub ntawm lub npias nyob rau hauv lub fermenter uas ces ua rau cov poov xab thiab lwm yam particulate "tso tawm" thiab tog rau hauv qab ntawm lub fermenter. FTSs Kov suav nrog hom cais uas tso cai rau tus neeg siv hloov pauv ntawm FERMENT hom thiab CRASH hom. Txhawm rau ua qhov no, tsuas yog nias lub pob "CRASH" nyob rau sab saum toj ntawm lub vijtsam thiab lub kaw lus yuav hloov mus rau hom kev sib tsoo. Thaum nyob rau hauv kev sib tsoo hom, nias lub SET TEMP khawm yuav coj koj mus rau CRASH TEMP npo uas tso cai rau koj xaiv los ntawm ob peb preset kub los yog kho rau ib tug tshwj xeeb kub uas siv lub nce thiab nqis xub. Txhua lub Hoobkas preset kub tuaj yeem hloov pauv rau cov neeg siv khoom presets los ntawm kev kho cov teeb pom kev zoo rau koj qhov kub thiab txias ces nias thiab tuav lub pob preset kub uas koj xav hloov.

POWERING NTAWM LUB CEV

Yog tias koj yuav tsum tau tua koj tus FTSs Kov yam tsis tau tshem tawm, koj tuaj yeem nias lub pob roj hmab me me ntawm sab nraub qaum ntawm chav tsev kom toggle lub hwj chim qhib / tawm.
Nias lub pob no yuav tig koj lub maub los thiab nres koj qhov kev tswj qhov kub thiab txias. Hom kev hloov hluav taws xob no tsuas yog ua tau yog tias chav tsev yuav tsis siv rau lub sijhawm luv luv (ib hnub lossis tsawg dua). Rau lub sij hawm ntev cia, peb pom zoo kom unplugging lub ntsiab fais fab mov kom tag nrho cov system tsis energized.

VIEWIB QHOV CHAW UA HAUJ LWM

Thaum lub sijhawm ua haujlwm, koj yuav pom daim duab me me ntawm lub ntsiab Temp Control Screen, nyob rau hauv qab ntawm Kev Nyeem Ntawv / Tam Sim No. Xaiv lub mini graph ntawm lub vijtsam no yuav qhib tag nrho cov duab qhia txog qhov kub thiab txias dhau sijhawm. Ntawm no koj tuaj yeem view cov keeb kwm kub thiab muaj peev xwm export lub cav.

EXPORT TEMPERATURE READING GRAPH

1. Txhawm rau xa koj cov ntawv ntsuas kub fermentation, xaiv "EXPORT" khawm kom qhib DATA EXPORT screen.
2. Ntxig lub FAT32 formatted USB tsav rau hauv Kov Screen Zaub..
3. Xaiv "EXPORT .CSV".
4. Xaiv tus Xa Rov Qab "←" ntawm DATA EXPORT Screen
5. Txhawm rau rov pib dua cov ntaub ntawv graph, nias "RESTART" los ntawm Chaw Saib Xyuas kom tshem tawm cov ntaub ntawv dhau los.

CEEB TOOM: Qhov loj tshaj plaws sab nrauv ntawm USB tsav uas yuav haum rau FTSs Kov yog 0.65 "dav x 0.29" siab (16.4mm x 7.4mm). Tsav nrog rooj plaub loj yuav tsis haum FTSs Kov.

SETTINGS

Hloov ntawm qhov txias txias tsuas yog ua kom txias thiab cua sov hom

1. Xaiv Chaw Cog “⚙” ntawm Start Up Screen lossis thaum ua haujlwm.
2. Xaiv Chilling nkaus xwb (rau lub twj tso kua mis nkaus xwb) lossis Chilling thiab cua sov (rau cov cua sov ncoo thiab twj tso kua mis ua haujlwm) ntawm qhov chaw Screen.
3. Xaiv tus Xa Rov Qab Xub "←" ntawm qhov chaw teeb tsa.
4. Xaiv tus Rov qab Arrow "←" ntawm lub ntsiab Temp Control Screen.

Hloov ntawm FAHRENHEIT thiab CELSIUS Scale MODES

1. Xaiv Chaw Cog “⚙” ntawm Start Up Screen lossis thaum ua haujlwm.
2. Xaiv F° (rau kev nyeem ntawv Fahrenheit) lossis C° (rau kev nyeem ntawv Celsius) ntawm lub vijtsam Chaw.
3. Xaiv tus Xa Rov Qab Xub "←" ntawm qhov chaw teeb tsa.

CALIBRATE TEMPERATURE PROBE (OFFSET)

1. Txiav txim siab ntau npaum li cas koj yuav tsum tau kho tus maub los txog li 12.0 degrees ob txoj kev. Qhov no tuaj yeem txiav txim siab los ntawm kev tso qhov kev sojntsuam rau hauv lub thermowell thiab muab tso rau hauv lub khob dej khov thiab muab piv rau lub ntsuas kub ntsuas.
2. Xaiv Chaw Cog “⚙” ntawm Start Up Screen lossis thaum ua haujlwm.
3. Xaiv "CALIBRATE" coj mus rau Temp Calibration Screen.
4. Kho nce lossis nqis raws li xav tau.
5. Xaiv tus Xa Rov Qab "←" ntawm Temp Calibration Screen.
6. Xaiv tus Xa Rov Qab Xub "←" ntawm qhov chaw teeb tsa

HOOBKAS QHOV RESET 

1. Xaiv Chaw Cog “⚙” ntawm Start-Up Screen lossis thaum ua haujlwm.
2. Xaiv thiab tuav "RESTART" rau 5 vib nas this. Koj lub vijtsam yuav ntsais thiab lub Hoobkas pib dua koj tus maub los. Qhov no yuav coj koj mus rau Thawj Lub Sijhawm Teeb Meem.

SsBrewtech.com 

Cov ntaub ntawv / Cov ntaub ntawv

Ss brewtech FTSS-TCH FTSs Touch Display Controller [ua pdf] Cov neeg siv phau ntawv qhia FTSS-TCH, FTSs Touch Display Controller, FTSS-TCH FTSs Touch Display Controller

Cov ntaub ntawv

• Cov neeg siv phau ntawv