Daim ntawv

OWLLON TNS-0117 Dobe Wireless Gamepad Rau Nintendo Hloov Pro Controller Tus Neeg Siv phau ntawv
OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Taw qhia ntau lawm:

This controller is of Bluetooth wireless type, which is mainly used with N-S console. The aisle light of the controller is assigned through the console. This product is available in motor vibration and sensor functions, and it supports the connection to PC console via USB so as to achieve PC XINPUT function

Daim duab khoom:

Daim duab khoom
Daim duab khoom

Function Diagram:

Txawj Pes Lub Npe Is there a function? lus hais
USB wired kev twb kev txuas Yog  
Bluetooth kev twb kev txuas Kev Pab  
Kev sib txuas hom N-S PC mode  
Six-axis gravity induction Yog  
Ib qhov tseem ceeb Yog  
B tus yuam sij Yog  
X key Yog  
Y yuam Yog  
- qhov tseem ceeb Yog  
+ yuam sij Yog  
L key Yog  
R qhov tseem ceeb Yog  
ZL key Yog  
ZR key Yog  
Tus yuam sij tsev Yog  
Print Screen key function Yog  
3D joystick (sab laug 3D joystick muaj nuj nqi) Yog  
L3 yuam sij (sab laug 3D joystick nias lub luag haujlwm) Yog  
R3 key (right 3D joystick press key function) Yog  
Cross key function Yog  
TUBRO speed regulation function Yog  
Connecting indicators Yog  
Motor vibration intensity adjustment Yog  
Tus maub los upgrade Kev Pab  

Mode and Pairing Instruction:

  • 1. N-S wired connection mode:
    1. Before use the wired connection, please confirm the N-S console system: “set up” -> “controller and inductor” -> “wired connection of Pro controller” in “on” state.
    2. The controller is connected to the N-S base via USB cable so as to be used as the wired controller, and the corresponding indicator light of the controller will flash slowly; when you plug out the USB cable, the controller turns into wireless mode and connect the console automatically!
  • 2. N-S wireless connection mode:
    1. Before use the wireless connection, please confirm that the N-S console system turns to: “controller” -> “ change grip/order” in pairing state.
    2. Long press the code key of the controller for 3 seconds to enter into Bluetooth search mode, and the LED indicator light will flash in marquee type.
      The corresponding channel indicator light will be on after successful connection.
  • 3. PC-360, PC mode:
    Firstly, please download the PC 360 to Windows computer. After the PC 360 is installed, the controller should be connected to the computer via USB cable, and the corresponding channel indicator light will be on after successful connection. The LED2 and LED3 will be on when the No.1 and No.10 keys are pressed simultaneously to switch to PC mode.
  • 4. Back connection and shutdown instruction:
    1. Short press the Bluetooth code key to shutdown the controller.
    2. Press Home to wake up the controller. The awakened controller will automatically back connect the console which has been paired previously; it will switch to auto sleep if the back connection is not successful within 8 seconds.

Charging Indication and Charging Characteristics:

During the charging of the controller: the charging LED indicator light will be on, and it will be off after the controller is fully charged.

Pw tsaug zog pib:

  • Connect N-S mode: the N-S console screen is off or shut down, and the controller automatically disconnects and switch to sleep mode.
  • Bluetooth connection mode: the Bluetooth disconnects and switches to sleep mode after the Bluetooth code key is pressed shortly.
  • Without any keys pressed within 5 min, it will switch to auto sleep mode (including gravitational induction immobility). Remarks: there is no auto sleep currently

TURBO Function Settings:

  • Semi-automatic TURBO muaj nuj nqi teeb tsa: nias TURBO yuam sij thiab tom qab ntawd teeb tsa nws ua TURBO ua haujlwm yuam sij raws li qhov xav tau, tom qab ntawd koj tuaj yeem ua tiav cov kev teeb tsa tiav.
  • Full-automatic TURBO function setting: press TURBO key and then press the key which has been set up with the semi-automatic TURBO function.
  • Keys available for TURBO function settings: A key, B key, X key, Y key, + key, – key, L key, R key, ZL key, ZR key, “cross” key (up, down, left and right), L3 key (left 3D joystick press key) and R3 (right 3D joystick press key).
  • Clear TURBO cov yuam sij ua haujlwm uas tau teeb tsa:
    • Clear TURBO function of single key: press TURBO key + key set up with TURBO function for quick clear.
    • Shut down the automatic firing function: you should short press the – key and down arrow key once, and the controller will vibrate once to execute the command, then the automatic firing function of all keys will be turned off.
  • Regulation methods of automatic firing speed:
    • A. Increase automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been up regulated by one gear successfully.
    • B. Reduce automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been down regulated by one gear successfully.
    • C. The automatic firing function is memorable. If the console is connected after the controller is disconnected, the automatic firing speed set up previously can be memorized.

Motor Vibration Regulation:

3 gears in total: weak, intermediate and strong (the changed amplitude is 40%, 70% and 100%) regulation methods:

  • Lowest gear (40% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Intermediate gear (70% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Top gear (100% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • The intermediate gear of controller vibration is acquiescently connected for the first time, i.e. 70% amptoj siab.

USB Connection Function:

  • The wired N-S and PC XINPUT mode connection is supported.
  • It is automatically identified as N-S mode when connected to N-S console.
  • It is in XINPUT mode when connected to PC.

Cov Khoom Hluav Taws Xob:

Yam Kev siv tus nqi
Ua haujlwm voltage DC 3.6-4.2V
Ua hauj lwm tam sim no 24mA
Pw tsaug zog tam sim no 22.5uA
Vibration current 82 mA~130 mA
Kev tawm tswv yim DC 4.5~5.5V/400mA
Roj teeb muaj peev xwm 500mAh
Kev khiav hauj lwm nrug 10m

3D Joystick Instruction:

  • The 3D joystick is not required to be calibrated manually on N-S console. The 3D joystick will be calibrated automatically when the N-S console is plugged.
  • If the 3D joystick drips during use, please replug and unplug the controller before use. Be careful not to touch the 3D joystick when you plug and unplug the controller.

Gyroscope Calibration Instruction:

Enter into the “N-S console setting – controller and inductor – calibration of gyroscope inductor” for controller test and calibration; place the controller horizontally on the desktop and long press + or – for calibration.

Controller Upgrade Instruction:

  • If this product cannot be used due to system compatibility and other reasons, please contact the customer service provider to provide program: install the upgrade package to upgrade.
  • Specific operation: plug the controller into the computer first, then press the X+Y+HOME for 3 sec to enter into the upgrade mode; and then open the Program.exe software, click update firmware to upgrade, and wait for the prompt for successful update.

Teeb meem xav tau kev saib xyuas:

  • This product should be well kept when not in use.
  • Cov khoom no tsis tuaj yeem siv thiab khaws cia hauv qhov chaw ntub dej.
  • Cov khoom no yuav tsum tau siv lossis khaws cia los ntawm kev zam cov plua plav thiab cov khoom hnyav kom lav nws lub neej kev pabcuam.
  • Thov tsis txhob siv cov khoom uas ntub dej, tawg lossis tawg thiab muaj teeb meem kev ua haujlwm hluav taws xob los ntawm kev siv tsis raug.
  • Tsis txhob siv cov khoom siv cua sov sab nraud xws li microwave qhov cub kom qhuav.
  • Yog tias nws puas lawm, thov xa mus rau lub chaw saib xyuas kev pov tseg. Tsis txhob disassemble nws ntawm koj tus kheej.
  • Cov menyuam yaus yuav tsum siv cov khoom no kom raug raws li cov niam txiv kev taw qhia, thiab tsis txhob quav ntsej qhov kev ua si.

FCC Ceev Faj :

Cov cuab yeej siv no ua raws li ntu 15 ntawm FCC Cov Cai. Kev ua haujlwm yog raug rau ob nqe lus hauv qab no:

  1. Cov cuab yeej no tsis tuaj yeem ua rau muaj kev cuam tshuam, thiab
  2. cov cuab yeej no yuav tsum lees txais txhua yam kev cuam tshuam uas tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis tsim nyog.

Ib qho Pauv Hloov lossis kev hloov pauv tsis tau pom zoo los ntawm tog neeg lav ris rau kev ua raws yuav ua rau tus neeg siv txoj cai los ua cov cuab yeej.

Nco ntsoov: Cov khoom siv no tau sim thiab pom tias ua raws li qhov kev txwv rau ib chav Class B digital device, ua raws li ntu 15 ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev ua kom muaj kev cuam tshuam tsis zoo hauv kev teeb tsa hauv chaw nyob.
Cov khoom siv no tsim tawm siv thiab tuaj yeem tshaj tawm xov tooj cua ntau lub zog thiab, yog tias tsis ntsia thiab siv ua raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam tsis zoo rau xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov khoom siv no ua rau muaj kev cuam tshuam tsis zoo rau xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm tig cov cuab yeej tawm, thiab cov neeg siv raug txhawb kom sim kho qhov kev cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:

  • Kho dua tshiab lossis rhais chaw ntawm lub kav hlau txais xov.
  • Ua kom kev sib cais sib txawv ntawm cov khoom siv thiab tus txais.
  • Txuas cov khoom siv rau hauv qhov hluav taws xob ntawm qhov hluav taws xob tsis zoo ib yam los ntawm kev sib txuas uas tus tau txais.
  • Nrog tus tswv lag luam lossis tus xov tooj cua / TV paub txog kev pab kom pab.

Cov cuab yeej tau raug ntsuas kom ua tau raws li qhov xav tau ntawm RF. Cov cuab yeej tuaj yeem siv nyob rau hauv cov khoom siv sib txawv uas tsis muaj qhov txwv.

Cov ntaub ntawv / Cov ntaub ntawv

OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller [pdf] Tus neeg siv phau ntawv
TNS-0117, TNS0117, 2AJJCTNS-0117, 2AJJCTNS0117, TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller, TNS-0117, Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Cia ib saib

Koj email chaw nyob yuav tsis tsum luam tawm.