MRCOOL MST04 Ntse Thermostat

Cov ntaub ntawv khoom

Specifications:

• Qauv: MST 04
• Lub zog xav tau: 24V AC ua
• Compatibility: Tsis ua hauj lwm nrog kab (siab) voltage los yog millivolt systems

Cov lus qhia siv khoom

Kev npaj installation:
Kauj Ruam 1: Fais fab tawm ntawm lub kaw lus siv tus Master Hloov lossis Circuit Breaker.
Kauj Ruam 2: Xyuas kom lub kaw lus kaw tag nrho los ntawm kev kuaj xyuas kom tsis muaj cua tawm ntawm qhov vents thiab xyuas kom meej tias cov nplaim taws tseem ceeb raug tua rau boilers.

Tshem Tawm Cov Kub Kub Kub:

• Kauj ruam 3: Tshem lub ntsuas kub tam sim no.
• Kauj ruam 4: Txheeb xyuas cov cim qhia tshwj xeeb ntawm lub ntsuas sov qub lub nraub qaum. Hu rau kev txhawb nqa yog tias xav tau.

Unit Installation & Wiring:

• Kauj ruam 5: Siv ib daim duab ntawm cov khoom siv hluav taws xob qub uas siv lub xov tooj smartphone.
• Kauj ruam 6: Tshem tawm cov kab hluav taws xob qub qub ntawm ib qho los ntawm ib qho thiab khij lawv nrog cov ntawv cim xaim.
• Kauj ruam 7: Optionally siv lub phaj phab ntsa muab los nkaum tej yam cim los yog qhov uas tshuav los ntawm lub qub thermostat.
• Kauj ruam 8: Ntxig cov ntawv sau cov xov hlau los ntawm lub qhov hauv lub nraub qaum thiab ntsia hlau rau hauv kev siv cov thauj tog rau nkoj thiab cov ntsia hlau.
• Kauj ruam 9: Ntxig R, RC, lossis RH xov hlau raws li nyob rau hauv cov terminals.
• Kauj ruam 10: Ntxig cov xov hlau ntxiv rau hauv cov khoom siv sib txuas, nias lub davhlau ya nyob twg thaiv cov nyees khawm kom yooj yim ntawm kev ntxig.

FAQ:

• Q: Cov cuab yeej twg xav tau rau kev teeb tsa?
  A: Cov cuab yeej xav tau suav nrog lub hau ntswj, lub xov tooj smartphone rau kev thaij duab, thiab muab cov ntsia hlau txuas thiab cov phab ntsa ntub dej.
• Q: Kuv yuav ua li cas yog tias kuv muaj ntau tshaj ib R-Wire?
  A: Yog tias koj muaj ntau tshaj ib R-Wire (xws li R, RC, thiab RH), ntxig koj ib leeg R, RC, lossis RH hlau rau hauv RC davhlau ya nyob twg thiab ntxig cov xov hlau seem rau hauv lawv cov terminals.

THOV PAB
Tsis ntev queues, tsis muaj bots, tsis muaj ncua sij hawm.
Peb teb 98% ntawm txhua qhov kev hu hauv tsawg dua 2 feeb thiab lav tias koj yuav tham nrog tus neeg tiag tiag.

Rau cov lus nug, thov mus saib peb webqhov chaw: mrcool.com/contact
or
Hu rau peb ntawm: 425-529-5775 Ib
Monday-Friday
9:00-9:00 PM ET

Nyeem phau ntawv no ua tib zoo ua ntej kev teeb tsa thiab khaws cia qhov twg tus neeg teb xov tooj tuaj yeem nrhiav tau yooj yim rau yav tom ntej siv.
Vim muaj kev hloov kho tshiab thiab txhim kho kev ua tau zoo tas li, cov ntaub ntawv thiab cov lus qhia hauv phau ntawv no yuav raug hloov pauv yam tsis tau ceeb toom.
Version Date: 05/30/24
Thov mus saib www.mrcool.com/documentation los xyuas kom meej tias koj muaj qhov tseeb version ntawm phau ntawv no.

Cov npe ntim & Cov cuab yeej xav tau

Cov cuab yeej xav tau:

• Laum nrog 3/16 "Lum Ntsis (rau mounting anchors)
• Phillips Ntsia Hlau
• Hlau Stripper (yeem)
• Rauj (Tsis teb los tau)
• mem hluav (yeem)

Kev teeb tsa

Kev Npaj Kev Npaj

• Kauj ruam 1: Fais fab tuag qhov system siv lub:
  1. Master Mus
     OR
  2. Circuit Breaker
• Kauj ruam 2: Xyuas kom tseeb tias lub kaw lus tau raug kaw tag nrho. Muab ob npaug rau xyuas tias:
  1. Tsis muaj huab cua tawm ntawm lub qhov cua.
  2. Lub ntsiab nplaim yog extinguished nyob rau hauv cov ntaub ntawv ntawm ib tug boiler.
• Kauj ruam 3: Tshem tawm cov ntsuas kub tam sim no.
• Kauj ruam 4: Saib ze ze rau ib qho ntawm cov ntsuas hauv qab no ntawm koj lub ntsuas kub qub lub nraub qaum:
  Yog tias koj pom ib qho ntawm cov ntsuas saum toj no, hu rau kev pab txhawb nqa. (Saib nplooj 1 kom paub meej txog kev tiv tauj.)
  Yog tias tsis muaj qhov ntsuas no tam sim no, txuas mus rau kauj ruam tom ntej installation.
  CEEB TOOM RAU HAUV TSEV KAWM NTAWV
  MRCOOL Smart Thermostat tsuas yog ua haujlwm nrog 24V AC. Tsis ua hauj lwm nrog kab (siab) voltage los yog millivolt systems.
• Kauj ruam 5: Siv lub xov tooj smartphone, thaij duab ntawm cov kab hluav taws xob qub.
  Unit Installation & Wiring
• Kauj ruam 6:
  1. Tshem tawm cov kab hluav taws xob qub qub ntawm ib qho los ntawm ib qho thiab khij lawv siv cov ntawv xov tooj uas suav nrog.
  2. Tshem lub phaj mounting ntawm lub ntsuas kub qub.
• Kauj ruam 7: Yeem-Koj tuaj yeem siv cov phaj phab ntsa uas muab los zais cov cim lossis qhov ntawm phab ntsa sab laug los ntawm kev teeb tsa lub ntsuas sov qub.
• Kauj ruam 8:
  1. Tshem tawm cov kab ntawv sau los ntawm lub qhov nyob nruab nrab ntawm MRCOOL Smart Thermostat backplate.
  2. Screw nyob rau hauv lub backplate siv ob peb ntawm cov phab ntsa qhuav anchors thiab screws.
• Kauj ruam 9: Koj puas muaj ntau tshaj ib qho R-Wire? (Qhov no suav nrog R, RC, thiab RH)
• Kauj ruam 10: Ntxig cov xov hlau uas seem rau hauv lawv cov terminals sib txuas los ntawm sab. (Nias lub davhlau ya nyob twg thaiv cov nyees khawm kom yooj yim ntawm kev ntxig.)
• Kauj ruam 11: Maj mam thawb cov xov hlau ntau dhau rov qab rau hauv lub qhov phab ntsa kom paub tseeb tias tsis muaj cov ntawv sau los ntawm nws.
• Kauj ruam 12: Teem lub MRCOOL Smart Thermostat nrog lub nraub qaum thiab nias maj mam muab txuas kom zoo.

App Installaition & Sau npe

Ua ntej sau npe:

Ua ntej kev teeb tsa App:

• Xyuas kom tseeb tias koj lub smartphone Bluetooth qhib.
• Xyuas kom tseeb tias koj lub smartphone lub Wi-Fi qhib.
• Xyuas kom tseeb tias koj lub smartphone muaj kev siv internet.
• Nco ntsoov tias koj muaj kev sib txuas hauv internet ua haujlwm ntawm koj lub router Wi-Fi.
• Xyuas kom tseeb tias tsis muaj npe server lossis authentication server teeb tsa ntawm koj qhov kev sib txuas hauv internet.
• Xyuas kom tseeb tias tsis muaj qhov raug ntes ntawm koj lub router Wi-Fi.

Tseem ceeb: Xyuas kom tseeb tias kev cais tus IP lossis kev cais tus neeg siv khoom raug kaw ntawm koj lub router Wi-Fi.

Txhim kho thiab sau npe lub App:

• iOS / Android
  Nruab "MRCOOL Smart HVAC" app los ntawm Apple App Store lossis Google Play Store. Nrhiav rau lub Smart HVAC app lossis luam theej duab QR code hauv qab no.
  Nkag mus rau hauv lub app yog tias koj twb muaj tus account. Yog tsis yog, tsim ib qho uas siv qhov kev xaiv sau npe.
• Nco tseg rau cov neeg siv iOS:
  • Rau iOS 13.0 thiab siab dua, qhov chaw tso cai yuav tsum ua kom tiav cov txheej txheem sau npe. Koj tuaj yeem kaw nws tom qab.
• Nco tseg rau cov neeg siv Android:
  • Rau Android OS 8.1 thiab siab dua, qhov chaw tso cai yuav tsum tau ua kom tiav cov txheej txheem sau npe. Koj tuaj yeem kaw nws tom qab.
• Kev sau npe ntaus ntawv: iOS / Android
  Qhib MRCOOL Smart HVAC app, coj mus rhaub "Add Device" ntawm lub vijtsam hauv tsev, thiab xaiv "Smart Thermostat" los ntawm cov npe ntawm cov khoom siv.

Coj mus rhaub "Txuas ntxiv" txhawm rau pib txheej txheem sau npe.

Muab cov kev tso cai tsim nyog thiab coj mus rhaub "Txuas ntxiv". Koj lub ntsuas sov yuav tshwm sim ntawm qhov screen.

Ua raws li cov lus qhia ntawm lub vijtsam txhawm rau txuas koj lub ntsuas cua ntse ntse nrog Smart HVAC app.

Tom qab cov txheej txheem sau npe ua tiav, coj mus rhaub "Ua tiav", thiab koj lub ntsuas kub ntse ntse yuav tshwm sim ntawm Lub Tsev Screen.

Unit Tshajview

App Functionalities

Ntaus Ntaus Ntawv

1. Nyem khawm
2. Temperature Up & Down khawm
3. Teeb Point Kub
4. Tuav xwm txheej
5. Ua raws li Schedule Indicator
6. Hom
7. Active Preset Indicator
8. Teem caij Set Indicator
9. Wake Up/Hold Settings Button
10. Presets khawm
11. Ntxuam Run Indicator
12. Qhov taw qhia Thaum tshav kub kub pab
13. Sab hauv tsev av noo
14. Nyob Sab Hauv Tsev Kub
15. Ntxuam nqis
16. Tsis Siv Internet
17. Qhov taw qhia Wi-Fi
18. Qhov taw qhia Bluetooth
19. Screen Lock/Unlock Indicator

Device Controls

• On-Device Controls:
  • Hloov hom ntawm koj HVAC System:
    Kov lub tshuab raj khawm ib zaug. Cov hom yuav pib blinking. Siv lub khawm nce lossis nqis los xaiv hom (piv txwv li, Txias, Kub, thiab lwm yam).
  • Hloov Cov Chaw Ntxuam:
    Kov lub tshuab raj khawm ob zaug. Cov kiv cua nqis icon yuav pib blinking. Siv lub khawm nce lossis nqis los hloov cov kiv cua nqis (ie, On, Auto).
  • Xauv / Unlocking Display Interface:
    Kov thiab tuav lub khawm Kub nce thiab nqis ib txhij kom txog thaum lub xauv lub cim nyob rau sab xis ntawm lub vijtsam hloov pauv lossis ploj.
  • Resetting Wi-Fi ntawm Ntse Thermostat:
    Kov thiab tuav qhov kub thiab txias khawm ib txhij kom txog thaum Wi-Fi icon ploj, thiab lub cim Bluetooth pib ntsais.
  • Wi-Fi Icon:
    • Case 1: Stable Wi-Fi Icon - Cov cuab yeej txuas nrog Is Taws Nem, qhia Wi-Fi lub zog.
    • Case 2: Wi-Fi Icon nrog daim duab peb sab me me - Cov cuab yeej txuas nrog lub router tab sis tsis muaj internet nkag. Xyuas kom koj muaj kev sib txuas hauv internet ua haujlwm thiab rov pib lub cuab yeej.
  • Bluetooth Icon:
    Blinking Bluetooth icon - Ntaus nyob rau hauv kev tshaj tawm (AP) hom. Thov ua kom tiav cov txheej txheem sau npe.

Warranty & License Agreement

1. MRCOOL tau lees paub rau tus tswv ntawm MRCOOL Smart Thermostat uas muaj nyob hauv qhov no ("Cov Khoom") yuav tsis muaj qhov tsis xws luag hauv cov ntaub ntawv thiab kev ua haujlwm rau lub sijhawm peb (3) xyoo txij li hnub xa khoom, tom qab thawj lub khw muag khoom muag (lub "Lub Sijhawm Warranty").
2. Yog hais tias cov khoom tsis ua raws li qhov txwv Warranty thaum lub sij hawm Warranty, MRCOOL. yuav, ntawm nws qhov kev txiav txim siab ib leeg, yog kho lossis hloov cov khoom puas lossis cov khoom siv.
3. Kev kho lossis hloov pauv tuaj yeem ua nrog cov khoom tshiab lossis kho dua tshiab lossis cov khoom siv, ntawm MRCOOL. qhov kev txiav txim siab ib leeg.
4. Yog tias cov khoom lossis cov khoom sib xyaw ua ke hauv nws tsis muaj lawm, MRCOOL. tuaj yeem hloov cov khoom nrog cov khoom zoo sib xws ntawm kev ua haujlwm zoo sib xws, ntawm MRCOOL qhov kev txiav txim siab ib leeg.
5. Ib yam khoom uas tau kho lossis hloov pauv raws li Qhov Kev Tiv Thaiv Txwv Txwv no yuav raug them los ntawm cov ntsiab lus ntawm Qhov Kev Txiav Txim Siab no ntev dua li cuaj caum (90) hnub txij li hnub xa khoom lossis lub sijhawm Warranty ntxiv. Qhov Warranty Limited no tsis hloov pauv los ntawm tus neeg yuav khoom qub mus rau cov tswv tom ntej thiab Lub Sijhawm Warranty yuav tsis txuas ntxiv rau lub sijhawm lossis nthuav dav hauv kev pabcuam rau kev hloov pauv.
6. YUAV TSUM TAU TXAIS; YUAV UA LI CAS YUAV UA LI CAS YUAV TSUM TAU TXAIS NTAWM NO LIMITED WARRANTY
   Ua ntej muaj peev xwm thov tau raws li qhov Kev Tiv Thaiv Txwv Tsis Pub Tshaj, tus tswv ntawm cov khoom yuav tsum (a) ceeb toom MRCOOL. ntawm lub hom phiaj thov los ntawm kev mus saib peb webqhov chaw thaum Lub Sijhawm Warranty thiab muab cov lus piav qhia ntawm qhov raug liam tias tsis ua haujlwm, thiab (b) ua raws MRCOOL cov lus qhia xa rov qab.
7. Qhov no txwv tsis pub muaj kev lav phib xaub
   Qhov kev lees paub no tsis suav nrog cov hauv qab no (suav sau "Cov Khoom Tsis Tsim Nyog"): Cov khoom lag luam cim ua "sample "lossis muag" AS YOG "; lossis Cov Khoom uas tau raug rau: (a) kev hloov kho, hloov pauv, tamping, los yog kev tu lossis kho tsis raug; (b) tuav, khaws cia, teeb tsa, sim, lossis siv tsis ua raws li Tus Neeg Siv Khoom Qhia lossis lwm cov lus qhia los ntawm MRCOOL; (c) kev tsim txom lossis kev siv khoom tsis raug; (d) kev puas tsuaj, kev hloov pauv, lossis cuam tshuam hauv hluav taws xob lossis kev sib txuas lus hauv xov tooj; los yog (e) Vajtswv tej dej num, xws li xob laim, dej nyab, cua daj cua dub, av qeeg, lossis cua daj cua dub. Qhov kev lees paub no tsis suav nrog cov khoom siv, tshwj tsis yog kev puas tsuaj yog vim qhov tsis xws ntawm cov khoom lossis kev ua haujlwm ntawm cov khoom, lossis software (txawm tias ntim lossis muag nrog cov khoom). Kev siv tsis tau tso cai ntawm Cov Khoom lossis software tuaj yeem cuam tshuam cov khoom lag luam kev ua tau zoo thiab tuaj yeem ua tsis raug cai txwv tsis pub lav no.
8. DISCLAIMER NTAWM WARANTIES
   Tsuas yog raws li tau hais los saum toj no hauv qhov txwv tsis pub tshaj tawm, thiab rau qhov siab tshaj plaws tau tso cai los ntawm txoj cai lij choj, MRCOOL. Kev tsis lees paub tag nrho, siv, thiab cov xwm txheej lav thiab cov xwm txheej nrog kev saib xyuas ntawm cov khoom lag luam, thiab kev tawm tsam rau ib lub hom phiaj tshwj xeeb. TXOJ HAUJ LWM NTAWM TXOJ CAI NTAWM TXOJ CAI NTAWM TXOJ CAI. MRCOOL. TSIS TXHOB TSIS TXAUS SIAB RAU LUB SIJ HAWM NTAWM TXOJ HAUJ LWM HAUJ LWM lossis cov xwm txheej rau lub sijhawm ntawm qhov txwv qhov kev lees paub no.
9. TXOJ CAI TSHIAB
   Ntxiv rau cov lus ceeb toom saum toj no tsis lees paub, tsis muaj qhov xwm txheej yuav MRCOOL. YUAV TSUM TAU TXAIS NYIAJ RAU IB TUG NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ PHIM NYUB VAIS PHIM NYUB VAIS PHIM NYUB VAIS PHIM NYUB VAIS NTUJ PHIM NYUB VAIS NTUJ PHIM NYUB VAIS NTUJ NTAWM LUB SIJ HAWM NTAWM LUB SIJ HAWM NTAWM LUB TSEV KAWM NTAWV THIAB KEV PAB CUAM NTAWM COV KHOOM NTAUB NTAWV NTAU LUB SIJ HAWM NO LIMITED WARRANTY OR Cov khoom yuav tsis tshaj tus nqi ORIGINAL ntawm cov khoom.
10. LIMITATION OF LIABILITY
    MRCOOL ONLINE SERVICES (“SERVICES”) muab cov ntaub ntawv rau koj (“cov ntaub ntawv khoom siv”) hais txog koj cov khoom siv MRCOOL lossis lwm yam khoom siv txuas nrog koj cov khoom (“cov khoom siv PERIPHERALS”). LUB SIJ HAWM NTAWM COV KHOOM PLIG PERIPHERALS uas tuaj yeem txuas rau koj cov khoom tuaj yeem hloov pauv los ntawm lub sijhawm mus rau lub sijhawm yam tsis muaj kev txwv qhov dav dav ntawm cov lus tsis lees paub saum toj no. Tag nrho cov ntaub ntawv ntawm cov khoom lag luam yog muab rau koj qhov yooj yim, "raws li yog", thiab 'raws li muaj". MRCOOL. TSIS TXHOB CEEV, TSO CAI, LOSSIS lav tias cov ntaub ntawv khoom yuav muaj, raug, lossis ntseeg tau lossis cov ntaub ntawv khoom siv lossis siv cov kev pabcuam lossis cov khoom yuav muab kev nyab xeeb hauv koj tsev. Koj siv tag nrho cov ntaub ntawv cov khoom, cov kev pabcuam, thiab cov khoom ntawm SOIROAT SCRETION thiab pheej hmoo. KOJ YUAV TSUM PAUB TXOG, THIAB MRCOOL. TSIS TXAUS SIAB TXOJ CAI NTAWM LUB SIJ HAWM, suav nrog koj cov kab hluav taws xob, khoom siv hluav taws xob, hluav taws xob, tsev, khoom siv, khoom siv, khoos phis tawj, khoom siv txawb, thiab txhua yam khoom siv thiab tsiaj nyob hauv koj lub tsev, kev tsim khoom lag luam, KHOOM. PRODUCT INFORMATION FOR FOR FOR FORMATION FOR FOR FOR FOR FORMATION FOR FOR FOR FOR FORMATION FOR FOR FOR FOR FORMATION FOR FOR FOR FORMATION FOR FOR FOR FOR FORMATION FOR FOR FOR FOR FORMATION FOR FOR FOR FORMATION Ntxiv rau qhov saum toj no, MRCOOL yuav tsis muaj kev lav phib xaub rau ib qho txiaj ntsig, xwm txheej, piv txwv, raug xwm txheej, lossis kev puas tsuaj tshwj xeeb, suav nrog txhua yam kev puas tsuaj tshwm sim los ntawm kev siv khoom.
11. VIM LI CAS THIAJ LI YUAV TSUM TAU TXAIS KEV RUAJ NTSEG
    Qee qhov kev txiav txim siab tsis tso cai rau kev txwv ntev npaum li cas qhov kev lees paub yuav kav ntev npaum li cas lossis kev cais tawm / kev txwv ntawm kev puas tsuaj los yog qhov tshwm sim, yog li qee qhov kev txwv uas tau teev tseg saum toj no yuav tsis siv rau koj.

Kev daws teeb meem
Yog tias koj MRCOOL Smart Thermostat tsis qhib, sim ua cov kauj ruam no:

1. Txheeb xyuas cov kab hlau txuas hauv qab thiab xyuas kom meej tias lawv tau muab tso rau hauv cov terminals kom zoo.
2. Nyob rau hauv cov ntaub ntawv ntawm ib tug R-Wire, xyuas kom meej tias nws yog muab tso rau hauv lub RC davhlau ya nyob twg.
   R lossis RC lossis RH → RC
   Nyob rau hauv cov ntaub ntawv ntawm ntau tshaj ib tug R-Wire, xyuas kom tseeb tias RH yog muab tso rau hauv lub RH davhlau ya nyob twg thiab RC los yog R yog muab tso rau hauv lub RC davhlau ya nyob twg.

Xav tau kev pab? Hu rau peb ntawm 425-529-5775 Ib los yog mus ntsib mrcool.com/contact

mrcool.com ua

Ntse Thermostat
Tus qauv tsim thiab tshwj xeeb ntawm cov khoom no thiab / lossis phau ntawv yog hloov pauv yam tsis muaj ntawv ceeb toom ua ntej. Sab laj nrog qhov chaw muag khoom lossis cov tsim cov ntawv lag luam kom paub meej.

Cov ntaub ntawv / Cov ntaub ntawv

	MRCOOL MST04 Ntse Thermostat [ua pdf] Tus tswv phau ntawv MST04 Ntse Thermostat, Ntse Thermostat, Thermostat
	MRCOOL MST04 Ntse Thermostat [ua pdf] Tus tswv phau ntawv MST04 Ntse Thermostat, MST04, Ntse Thermostat, Thermostat

Cov ntaub ntawv

• Cov neeg siv phau ntawv