User Manual for Jem models including: WM-AC201 Wireless module, Wireless module
Joinsoon Electronics Mfg. Co. Ltd. WFMD001 Wireless module N8J-WFMD001 N8JWFMD001 wfmd001
File Info : application/pdf, 12 Pages, 496.98KB
DocumentDocumentWM-AC201 User's Manual JEM Product user's manual 802.11AC 2T2R Module Model : WM-AC201 Datasheet Number: UM-WM-AC201 Reversion 1.0 Author: JEM, TAIWAN PROPRIETARY NOTE This item is the property of JEM Inc., Taipei, Taiwan and trade secret information. This item may not be transferred from the custody of JEM Inc., except as authorized by JEM Inc. and then only by way of loan for limited purposes. It must not be reproduced in whole or in part and must be returned to JEM Inc. upon request and in all events upon completion of the purpose of the loan. Neither this item nor the information it contains may be used by or disclosed to persons not having a need for such use or disclosure consistent with the purpose to the loan without prior written consent of JEM Inc. 1 WM-AC201 User's Manual Revision and history: Rev. Description: 1.0 Initial Release Originated or modified by: James Hsieh Checked by: - Approved by: 2 WM-AC201 User's Manual About ......................................................................................................................................................... 3 Product description ...................................................................................................................................3 Product features.................................................................................................................................4 Application ........................................................................................................................................ 4 Mechanism ........................................................................................................................................5 Pin Definition....................................................................................................................................5 Pin out Specification .........................................................................................................................7 General Specification................................................................................................................................8 Antenna support list ..................................................................................................................................9 About This specification is a preliminary product specification that written by Joinsoon Electronics MFG. Co., Ltd for the "WM-AC201 AC 2T2R Module". Product description WM-AC201 is a highly integrated 802.11a/b/g/n/ac 2T2R module that support 2-stream 802.11ac solutions with Multi-user MIMO. It integrates a high performance 1GHz MIPS24Kc processor, Fast Ethernet switch with RGMII, USB2.0 controller, DRAM and flash memory controller, and useful peripheral interfaces. It combines a WLAN MAC, a 2T2R capable WLAN baseband. It provides a complete solution for a high throughput performance integrated wireless LAN device. It is designed to provide excellent performance with low power consumption and enhance the advantages of robust system and cost-effective. It is targeted at competitive superior performance, better power management applications The RTL8197F delivers high-performance with low power consumption for applications such as 11ac dual band smart routers, IoT gateway, VPN gateway, VoIP gateway, Network Storage, LTE routers etc. 3 WM-AC201 User's Manual Product features IEEE802.11a/b/g/n and 802.11ac compliant. Operates at 2.4GHz and 5GHz frequency bands. CPU MIPS 24Kc speed up to 1GHZ Chipset embedded DDRII 128MB Support STBC, transmit Bean Forming. Modulation: BPSK, QPSK,16 QAM, 64-QAM, 256-QAM, OFDM. WPA, WPA2 and hardware accelerated AES encryption/decryption. Support 2T/2R transmission rate 300Mbps in 802.11n, and 867Mbps in 802.11ac (Physical rate) at 20MHz /40Mhz /80MHz Bandwidth. Support Multiple SSID QOS: Traffic Control & WMM/WMM-PS Various peripheral: USB host, UART, WAN Port, GPIO.. and so on. USB2.0 support for date rates up to 480Mbps high speed 2 IPEX Antenna Connectors (with 2 switches for 2.4G/5G selection) Support AP client for internet access. Support PC/NB wireless access interface Support UPnP medial (DLNA compatible ) access Dimension 62x33x5 mm Application Mobile Internet Device TV IP-cam STB 4 WM-AC201 User's Manual Mechanism Pin Definition I : Input O : Output P : Digital Power G : Digital Ground AI : Analog Input AO : Analog Output AI/O : Analog Bi-Directional Input/Output I/O: Bi-Directional Input/Output J13 18pin(9*2) Pin No. Name 1 VDD 2 VDD 3 GND 4 GND 5 GPIOE2 6 GPIOE3 7 GPIOE4 8 GPIOE1 9 GPIOH0 10 GPIOG6 In/Out/P/G Function P 3V3 Power Input P 3V3 Power Input G Ground G Ground B General-purpose pin E2 B General-purpose pin E3 B General-purpose pin E4 B General-purpose pin E1 B General-purpose pin H0 B General-purpose pin G6 5 WM-AC201 User's Manual 11 GPIOH1 12 GND 13 GND 14 USB_HSDM1 15 GPIOH2 16 USB_HSDP1 17 CPIOA5 18 GND B G G AI/O B AI/O B G General-purpose pin H1 Ground Ground USB Port1 Host Device Data Minus Pin General-purpose pin H2 USB Port1 Host Device Data Plus Pin General-purpose pin A5 Ground J14 14pin(7*2) Pin No. Name In/Out/P/G Function 1 GPIOC3 B General-purpose pin C3 2 GPIOH4 O General-purpose pin H4 3 GPIOC2 B General-purpose pin C2 4 GPIOH3 O General-purpose pin H3 5 GPIOB1 B General-purpose pin B1 6 TXOP_P4 AO 10/100M Ethernet Transmit Pair 7 GPIOB5 B General-purpose pin B5 8 TXON_P4 AO 10/100M Ethernet Transmit Pair 9 GPIOB4 B General-purpose pin B4 10 RXIP_P4 AI 10/100M Ethernet Receive Pair 11 GPIOB3 B General-purpose pin B3 12 RX_N_P4 AI 10/100M Ethernet Receive Pair 13 GPIOB2 B General-purpose pin B2 14 VDD P 3V3 Power Input J18 7pin(7*1) Pin No. Name 1 GPIOC5 2 GPIOC6 3 GPIOC7 4 GPIOD0 5 GPIOB6 6 GND 7 VDD In/Out/P/G Function P General-purpose pin C5 P General-purpose pin C6 G General-purpose pin C7 G General-purpose pin D0 B General-purpose pin B6 G Ground P 3V3 Power Input 6 WM-AC201 User's Manual Pin out Specification VDD: Digital I/O Power in 3V3 GND: Digital ground GOIO : General-purpose In /Out interface. Internal pull-High/pull-down Resistor GPIOH4 internal pull down only in strap period, GPIOC7 None 7 WM-AC201 User's Manual General Specification Main Chipset WLAN Standard LED indicator OS Support Dimensions(W*D*H) Power consumption Temperature-Operating Temperature-Storage Humidity-Operating Humidity-Storage Realtek RTL8197FS and RTL8812BRH IEEE802.11a/b/g/n and 802.11ac compliant Drive operation status: Busy/Read/Write Linux, Windows 7/8/10 62mm* 33mm* 5mm 3.3V/1.37A ( at AP mode with 5GHz data transmission) 5 to 40 ( ) -40 to 60 ( ) 10 to 80 ( %RH ) 10 to 90 ( %RH ) Parameter Operating Frequency Support Data Rates Support Bandwidth Modulation Technique Transmit Power Protocol IEEE802.11 b/g/n IEEE802.11 a/n/ac IEEE802.11b IEEE802.11g IEEE802.11a IEEE802.11n IEEE802.11ac IEEE802.11b IEEE802.11g IEEE802.11a IEEE802.11n IEEE802.11ac IEEE802.11b IEEE802.11g IEEE802.11a IEEE802.11n IEEE802.11ac IEEE802.11b IEEE802.11g IEEE802.11a Value 2.412 GHz ~2.484GHz 5.15GHz ~5.85GHz 1, 2, 5.5, 11 Mbps 6, 9, 12, 18, 24, 36, 48, 54 Mbps 6, 9, 12, 18, 24, 36, 48, 54 Mbps MCS0 - MCS7 MCS0 - MCS9 20MHz 20MHz 20MHz 20MHz, 40MHz 20MHz, 40MHz, 80MHz DSSS and CCK OFDM OFDM OFDM OFDM 18 dBm ± 2 dBm 15 dBm ± 2 dBm 15 dBm ± 2 dBm 8 WM-AC201 User's Manual IEEE802.11n IEEE802.11ac 15 dBm ± 2 dBm 15 dBm ± 2 dBm Receive Sensitivity 2.4G Receive Sensitivity 5G Receive Sensitivity IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11a IEEE 802.11n IEEE 802.11 ac Signal Strength Data Rate Bandwidth -98 dBm ± 1 dBm 1 Mbps 20MHz -89 dBm ± 1 dBm 11 Mbps 20MHz -91 dBm ± 1 dBm 6 Mbps 20MHz -74 dBm ± 1 dBm 54 Mbps 20MHz -91 dBm ± 1 dBm -73 dBm ± 1 dBm -89 dBm ± 1 dBm -91 dBm ± 1 dBm -74 dBm ± 1 dBm -90dBm ± 1 dBm -72 dBm ± 1 dBm -88 dBm ± 1 dBm -85 dBm ± 1 dBm MCS0 MCS7 MCS0 6 Mbps 54 Mbps MCS0 MCS7 MCS0 MCS0 20MHz 20MHz 40MHz 20MHz 20MHz 20MHz 20MHz 40MHz 80MHz Antenna support list This module has been approved to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna Type Model Number connector Gain(dBi) 2.4G 5G PIFA JEMPCBWIFI -2 I-Pex 2.92 3.58 PIFA JEMPCBWIFI -1 I-Pex 2.57 2.60 Dipole JEMPDIPOLEWIFI -1 I-Pex 4.68 3.53 Dipole JEMPDIPOLEWIFI -1 I-Pex 4.68 3.53 Dipole 3.07.XXXX I-Pex 2.79 3.72 Dipole 3.07.XXXX I-Pex 2.79 3.72 9 WM-AC201 User's Manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted to indoor use. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is intended for OEM integrators under the following conditions: This module is certified pursuant to two Part 15 rules sections(15.407, 15.247). 10 WM-AC201 User's Manual Label of the end product: The host product must be labeled in a visible area with the following " Contains FCC ID: N8J-WFMD001 ". The end product shall bear the following 15.19 statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This module is restricted to integration into hosts for indoor use only. This module has been approved under stand-alone configuration. OEM integrator has be limited the operation channels in channel 1-11 for 2.4GHz band. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations The information on how to configure test modes for host product evaluation for different operational conditions for a stand-alone modular transmitter in a host, , versus with multiple, simultaneously transmitting modules or other transmitters in a host can be found at KDB Publication 996369 D04 Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment authorizations (e.g. SDoC) of the host product to be addressed by the integrator/manufacturer. This module is only FCC authorized for the specific rule parts 15.247, 15.407 listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host product as being Part 15 Subpart B compliant. The user manual of the end product Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other 11 WM-AC201 User's Manual antenna or transmitter. 12Alpha Adobe PDF Library 15.0