Home page
Instructions for GILL models including: 730182C, 730182, 730182C Fusion F8 Starting Block, Fusion F8 Starting Block, F8 Starting Block, Starting Block
Gill Athletics Fusion F8 Starting Block 730182C — Change Speed Running See
Gill Athletics Fusion F8 Starting Block 730182C — Change Speed Running
File Info : application/pdf, 3 Pages, 304.00KB
DocumentDocumentwww.gillathletics.com 800-637-3090 Pedal pads are available in the following colors: - Royal Blue - Red - Orange - Black - Green 730182 - FUSION 8x8 STARTING BLOCK INSTRUCTIONS False start bracket Carrying handle Pedal pads are 8" x 8" Pedal angle adjusts to four positions. Precise and consistent foot placement is ensured using the integrated pedal markings. Pedals are adjustable to 30°, 40°, 50°, and 60° settings. Angled spikes in the base of the pedals guarantee a start with absolutely no slipping. Built in handle allows for easy carriage. Copyright 2021 by Gill Athletics. All rights reserved. 2/18/2022 inst730182 Page 1 of 3 www.gillathletics.com 800-637-3090 The FUSION starting block is shipped unassembled. The following tools are needed: - Needle Nose Pliers - Spike Wrench - Allen Key (provided) Pedal Pad 1. Pedal pads Set the angle of the pedal to the 60 position. Insert the tabs on the pedal pad into the holes in the pedal plate. Use one hand to press on the pedal pad. Use the other hand to gently pull the tabs through the holes with needle nose pliers. Gently wiggle the tab to help it through the hole. Be careful not to pull the tab off of the pedal pad. 730182 - FUSION 8x8 STARTING BLOCK INSTRUCTIONS Pedal Plate 2. False start bracket Fasten the false start bracket to the back of the rail with the flat head screw provided. Make sure that the "teeth" of the rail are pointing away from the false start bracket. Rail False Start Bracket M8 x 16mm Flat Head Cap Screw 3. Pedals Slide each pedal onto the rail so that the pedal pad is facing towards the open end of the rail. 4. Handle Fasten the handle to the front of the rail with the flat head screw provided. 5. Spikes Flip the starting block over and install the spikes into the bottom of each pedal. Copyright 2021 by Gill Athletics. All rights reserved. Handle Rail M8 x 16mm Flat Head Cap Screw 2/18/2022 inst730182 Page 2 of 3 www.gillathletics.com 800-637-3090 730182 - FUSION 8x8 STARTING BLOCK INSTRUCTIONS Replacement Parts 7301821C02 - Royal Blue 7301821C03 - Red 7301821C05 - Orange 7301821C12 - Black 7301821C15 - Green 7301822 Includes: Right & Left Pedal with Pedal to Rail Connectors Handle & Rear Bracket Handle & Rear Bracket Screws REPL00043 Pedal Set Screws QTY 10 7301813 Rail 73016504 Spike Kit includes 16 spikes Copyright 2021 by Gill Athletics. All rights reserved. 2/18/2022 inst730182 Page 3 of 3