Pure & Easy Assembly Instructions

NOTICE

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

Assemble on a flat and solid surface. To avoid the unstable surface affecting the overall frame stability during installation.

Professional installation is highly recommended.

Periodically Check That All Components Are Tightly Secured.

It is recommended that multiple people assemble this product.

Please contact us if parts of your furniture are missing.

Please have the following auxiliary tools ready:

[Drill] [Hammer] [Screwdriver] [Wrench] [Ladder] [Gloves] [Safety Helmet]

PARTS

EXPLODED VIEW

[Diagram showing all parts and their assembly points]

ASSEMBLY

1. Step 1: Attach part 1 to part 1L and 1R using parts 4B and S4 screws.
2. Step 2: Attach part 3R to part 3L using part 4B and S4 screws.
3. Step 3: Connect the assembled parts from Step 1 and Step 2 using part C and S4 screws.
4. Step 4: Insert part 5 into the assembled structure.
5. Step 5: Attach part 6L and 6R to the structure using parts 6, 10, and S4 screws.
6. Step 6: Attach part 8L and 8R to the structure using parts 10 and S4 screws.
7. Step 7: NOTES: When assembling the beam: Make sure parts (7, 8L, 8R) have the sides with closely spaced holes facing outward, and the sides with widely spaced holes facing upward. Ensure parts (6L, 6,6R) have the sides with rectangular latch lock slot facing downward. Part 6L should be on the left side and part 6R on the right. Attach part 7 to the structure using part 5 and F screws.
8. Step 8: Secure the structure using W7 panels and S4, F7 screws.
9. Step 9: Attach W5 panels to the structure using F7, S4, S6, S7 screws. The installation steps are the same on the opposite side.
10. Step 10: Fasten the screws according to the numerical order. Ensure screws are left unfastened on both sides of the component until the adjacent component is installed and overlapped, then secure the screws.
11. Step 11: Attach W5 panels and 17L, 17R panels using S4, S6, S7, F7 screws.
12. Step 12: Attach 24L and 24R panels using S6 and S7 screws.
13. Step 13: Secure the top panels using S4 screws.
14. Step 14: Attach roof panels 21L and 21R using 21, S4, F7, S6, S7 screws.
15. Step 15: Install corrugated roofing panels (W12, W15) using S4, F7, F8 screws. Pay attention to the placement of the fastening screws at the overlap joints.
16. Step 16: Attach roof panels 19L, 19R, and 20 using S4, S8, F7, F4, F8, F10 screws.
17. Step 17: Install part 16 to the side of part M1 (front side panel) with the longer distance from the center screw hole to the edge, and part 22 to the side with the shorter distance, using S7, F7, S6, S1 screws.
18. Step 18: Attach part 21 to M1 using F7 and S4 screws.
19. Step 19: Attach brackets and panels using S4, S6, S7, S5, S12, F7 screws.
20. Step 20: Install part 16 to the side of part M1 (front side panel) with the longer distance from the center screw hole to the edge, and part 23 to the side with the shorter distance, using S2, S3, S6, S7, F7 screws.
21. Step 21: Attach part 21 to M1 using S4 and F7 screws.
22. Step 22: Secure the structure using 21, S4, S6, S7, F7 screws.
23. Step 23: Secure the structure using S6 and S7 screws.
24. Step 24: To improve wind resistance, ensure expansion bolts or ground stakes (S9) are installed. Expansion bolts are crucial for stability on concrete surfaces, and ground stakes are used for grassy areas. The accessory package includes ground stake components, but expansion bolts are not included.
25. Step 25: Installation Completed.

HELP CENTER

• Inquiry ?
• Assembly Issue ⚙️
• Missing Parts ❌
• Returns & Refunds ?

If you encounter any difficulties during assembly, please contact us.

DISCLAIMER

Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.