Aviation Inspired Timepieces – AVI-8 Timepieces
Instruction Manual for AVI-8 models including: AV-4093 Hawker Typhoon Smart Watch, AV-4093, Hawker Typhoon Smart Watch
User Manuals – AVI-8 Timepieces
File Info : application/pdf, 7 Pages, 1.01MB
DocumentDocumentAVI_8
For more details on operating this timepiece please refer to the enclosed booklet or visit:
AVI-8.CO.UK
RB396 SHEILA CHRONOGRAPH Limited edition
For more infomation Pour plus d'informations Para más información Per maggiori informazioni Für mehr Informationen
Instruction Manual
Vol. 1.93 EN
AV- 4 0 9 3
CHRONOGRAPH WATCH
This watch is powered by a quartz Chronograph movement capable of split micro measurements of time. With pinpoint accuracy you may use this watch to measure separate periods of elapsed time while simultaneously reading
the current time.
For more details on operating this timepiece please refer to the enclosed booklet or visit:
AVI-8.CO.UK
1
HOUR HAND
STOPWATCH 1/10 SECOND HAND
MINUTE HAND 24 HOUR HAND
STOPWATCH MINUTE HAND
SECOND HAND
/ SEC
STOPWATCH SECOND HAND
1ST CLICK
PUSH BUTTON A
CROWN
PUSH BUTTON B
0
CLOSED
PUSHED BACK AND WATER RESISTANT
1
OPENED
NOT SECURED FOR WATER RESISTANCE
HOW TO SET THE TIME 1. Pull the crown to position [1]-(1st click). 2. Turn the crown clockwise to set the
correct time. 3. Push the crown in.
0
01
0
* Take A.M./P.M. into consideration when setting the hour and minute hands to the desired time.
3
STOPWATCH FUNCTION
· The measurement of time is indicated by the stopwatch hands that move independently of the center hands and 24-hour hand.
· The stopwatch can measure up to 60 minutes. · The stopwatch measures in 1/10 second
increments.
STANDARD MEASUREMENT
START
STOP
RESET
4
ACCUMULATED ELAPSED TIME MEASUREMENT
START
STOP
RESTART
SPLIT TIME MEASUREMENT
START
SPLIT
RELEASE
RESET
STOP
RESET
STOP
Restart and stop of the stopwatch can be repeated by pressing the button A.
5
Measurement and release of split time can be repeated as many times as necessary by pressing the button B.
6
ADJUSTING STOPWATCH HANDS POSITION
* Before setting the time, check if all the chronograph hands - 1/10 second (where applicable), second, minute - are at the "0" (12 o'clock) position. * If the stopwatch is in use, press the buttons in the following order to reset it, and then, check if the hands return to "0" position. * If the chronograph is counting : A B * If the stopwatch is stopped : B * If the split time is displayed : B A B
A
1. Pull the crown out to position [1]-(1st click).
2. Press button A or B to reset all stopwatch hands to "0" position.
* The stopwatch minute hand moves correspondingly with the stopwatch second hand.
* The hands move quickly if the respective buttons are kept pressed.
3. Push the crown back to the normal position.
01
1
0
B
If either of the stopwatch hands are not in the "0" position, reset them following the procedure.
7
8
STOPWATCH HANDS ZERO
POSITIONS
/ SEC
9
WATER RESISTANCE
Note that the water resistance chart serves only as a guide (please refer to the water resistance chart on the next page). Actual water resistance may vary depending on a number of factors including water temperature, water salinity and use under water. The water resistance of your timepiece may eventually be compromised over time with general wear and tear and use of your timepiece under adverse conditions.
Note that you should NEVER wear your watch in a jacuzzi, hot shower or steam room where steam may enter the case despite the watertight seals used to protect your watch. This may cause condensation inside your watch, which may affect and damage the inner workings of your watch.
WATER RESISTANCE 50M/
CHART
5ATM
SPLASH/ SHOWERING
SWIMMING/ BATHING
BRIEF SWIMMING/ WATER SPORTS
PROLONGED SWIMMING/ FREE DIVING
SCUBA DIVING
PROFESSIONAL DEEP SEA DIVING