I. Product Description
ON/OFF: Connect the camera to a power source (3.7V-5V/1A-2A power bank, charger, etc.). The camera will turn on automatically. It has a built-in battery; charge it for 2 hours before first use. Press the power key once to turn it on, and press and hold for 3 seconds to turn it off.
RESET: Press the reset key for 6 seconds to reset the camera. The lights will turn off, and then a blue light will flash slowly ?, indicating it is in AP Mode.
CARD PORT: Insert a Micro SD card (Max 128G, not included) to save recordings.
Diagram Description: A diagram shows the camera's physical layout with labels pointing to USB port, TF card slot, and RESET and ON/OFF buttons/indicators.
II. APP Settings
1. Download the app "iWFCam"
Scan the QR code below to download the APP compatible with your phone system.[QR Code Image: A QR code is displayed, which links to download the iWFCam app for Android, iOS, or PC.]
2. Camera-Phone Connection (AP Mode)
Turn on the camera. The blue light will flash slowly ?, indicating it is in AP Mode.
- Tap into your phone's WLAN settings.
- Find the camera's hotspot signal (named with "BK***" without a password) and connect to it.
- If you are using an Android phone, a message may pop up asking to confirm the connection. Please keep connecting with the camera.
Note: For a strong signal, camera-phone connection should be completed within 5 meters.[Screenshot Description: Shows phone WLAN settings displaying the camera's hotspot (e.g., BK1C4FA-...-5E2708) and a confirmation dialog for connecting to a network without internet access.]
3. Camera-APP Remote Connection (IP Mode)
Start the iWFCam app. The camera will be automatically added online.
- Click the 'Setting' icon next to the camera in the app.
- Select 'Wifi Config', choose your router, and enter the router's network password. (The camera supports 2.4G WiFi only).
- Wait for the camera's update process for remote control. Once it shows 'Online', the connection is successful, and the camera's blue light will be constantly on.
Note: For a strong signal, camera-router connection should be completed within 5 meters.[Screenshot Description: Shows app interface for device settings and Wi-Fi configuration, including selecting a router and entering a password. Another screenshot shows the camera status as 'Online'.]
4. Camera Live-feed Page
Click on the camera in the app. A pop-up message will appear to change the password; you can skip or change it for security.
You can then view the live camera feed. On this page, you can adjust settings such as Brightness, Night Vision, Video Resolution, Audio, Microphone, Video, and Photo capture.
[Screenshot Description: Shows the live camera feed interface within the app, including options to change the password, adjust video quality (e.g., 720p), and access various camera controls.]
Important Notes and Warnings
Ventilation: The camera should be kept with space around it for ventilation. Do not cover the shell or its surrounding heat sinks when the equipment is opened or charged. Blocking heat sinks can cause overheating and damage, leading to the equipment being unusable or other serious consequences. The manufacturer takes no responsibility for such damage and bears no legal liability.
Usage Occasion: Please strictly abide by relevant national laws and regulations. Do not use this product for any illegal purposes, as the consequences are at your own risk.
Batteries: The working time of the built-in battery will decrease over time. If the camera is not used for a long time, please charge it before use.
Working Environment:
- Temperature: 0 - 45 degrees Celsius. For optimal service life, use at room temperature. Do not cover the shell or its heat sink.
- Humidity: 20%-80%. Do not use in a humid environment. The product is not waterproof.
Other Matters: This product is a precision electronic device. Do not subject it to strong shock and vibration. Do not use it near strong magnetic fields, strong electric fields, or inflammable and explosive articles.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
