Installation Guide for GPID models including: 5000092132, TECH_2, Aluminium Double Driveway Gate, Double Driveway Gate, Driveway Gate, Gate

INSTALLATION FITTING INSTRUCTIONS ALUMINIUM DOUBLE DRIVEWAY GATE

contents 1. mark position of posts 2. floor or concrete mount 3. drill floor bolts 4. fix to floor 5. dig post holes 6. cut 2 x posts to length 7. concrete posts

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 21 Pages, 2.40MB

Document Document

INSTALLATION FITTING INSTRUCTIONS
ALUMINIUM DOUBLE DRIVEWAY GATE
(BETWEEN POSTS)

CONTENTS
1. MARK POSITION OF POSTS 2. FLOOR OR CONCRETE MOUNT
3. DRILL FLOOR BOLTS 4. FIX TO FLOOR
5. DIG POST HOLES 6. CUT 2 X POSTS TO LENGTH
7. CONCRETE POSTS 8. FLOOR SPIGGOT
9. PRE-ASSEMBLE LOWER SPIGGOT 10. FIX LOWER HINGE TO FLOOR 11. ASSEMBLE UPPER SPIGGOT 12. LOAD GATE - HOLD SQUARE
13. MARK UPPER HINGE POSITION & DRILL POST
14. FIX UPPER HINGE 15. REPEAT STEPS 8-15 FOR L.H. GATE
17. ADJUST UPPER HINGES 18. FIT COVERS ­ 4 X PLACES