SENCOR SEP 800

1. Package Contents

• Headphones
• User's manual
• USB-C charging cable

2. Description of BT Headphones and Controls

The SENCOR SEP 800 headphones are over-ear type with a flip-up microphone.

Diagram Description: The headphones are depicted with left (L) and right (R) earcups. Key controls and ports are indicated by numbers:

• 1: Integrated microphone
• 2: Foldable microphone
• 3: Volume up button (press 1x) / Go to previous track (long press)
• 4: On/Off button (long press) / PLAY/PAUSE (press 1x) / Answer/end incoming call (press 1x) / Reject incoming call (long press for 2 seconds) / Last call redial (press 2x) / Change GAME / MUSIC mode (long press for 2 seconds) / SIRI/Google Assistant (press 3x)
• 5: Volume down button (press 1x) / Go to next track (long press)
• 6: 3.5 mm AUX IN socket
• 7: USB-C charging connector
• 8: LED indicator
• 9: LED effect (active in GAME MODE only)
• L: Left earpiece – left audio channel
• R: Right earpiece – right audio channel

The foldable microphone can be activated by using a fingernail or a blunt object in the 'A' notch to turn the microphone 180° to position 'B'.

3. Putting into Operation

Before first use, read the safety instructions carefully. Charge the headphones to the maximum level before the first use.

Turning on: Press and hold the power button in the default position and wait for the headphones to greet you.

Turning off: Press and hold the power button in the default position and wait for the headphones to announce the shutdown.

Warning: To prevent hearing damage, always keep the volume level of your device to a minimum before connecting BT headphones to your mobile device.

Note: The BT headphones will turn off after a longer period of inactivity unless they are paired to another device.

4. Bluetooth

The headphones feature a dual-channel BT module, allowing connection to two devices simultaneously. The audio signal will come from the last connected device. You cannot operate both audio signals simultaneously.

Pairing: Turn on the BT headphones and search for its Bluetooth name “SEP 800BT” on your device. Start the pairing process. If prompted for a pairing code, use “0000”.

To cancel pairing: Disconnect the BT earphones from your mobile device (cancel Bluetooth pairing).

Note: For a stable connection, keep the distance between the BT headphones and your paired device within 10 meters. Ambient interference may require a shorter distance.

5. Audio AUX IN

The headphones are equipped with a 3.5mm jack. Connect your device using the included audio cable. First connect the audio connector to your device, then to the headphones.

Notice: Before connecting, ensure the output signal from your device is at its minimum level to prevent damage to the headphones and your hearing.

6. Microphone

The headphones have an integrated microphone and a foldable microphone. Use the foldable microphone for enhanced sound quality during games or teleconferences. By default, the microphone is folded and muted. To activate it, use the 'A' notch to flip it 180°.

7. LED Indicator

• Red LED: Charging in progress
• Blinking Red LED: Battery empty
• No indication: Battery fully charged
• Blinking Red / Light Blue LED: Headphones ready for pairing
• Blinking Light Blue LED: Headphones paired to your device

8. Charging

A charged battery provides power for several hours at normal volume levels. High volume consumes more battery power.

Attention: Use only original accessories for charging. To achieve maximum battery life, charge when the battery is low (10% – 20%). Charge continuously until fully charged.

Recommendation: Charge when the battery is first reported low (20% or 10%). If the battery life is very short, contact an authorized service center.

Recommendation: If not using the headphones for an extended period, charge the batteries fully every two to three months.

9. Specifications

• Bluetooth Version 5.3
• Maximum Transmitter Power 100mW @ 2.4GHz-2.4835GHz
• Distance 10m
• Battery capacity 600mAh, 3.7V
• Playback time: 35 hours
• Recharging time 2.5 hours
• Impedance 32ohm ±15%
• Sensitivity 110dB ±3dB
• Input 5V

10. Safety Notices

• Observe local driving laws.
• Do not disassemble or modify the headset.
• Contact an authorized service center for any problems.
• Keep equipment and accessories away from children and pets.
• Avoid extreme temperatures.
• Do not immerse the earphones in water.
• Avoid listening at high volumes to prevent hearing damage. Use the lowest necessary volume.

11. Disposal Information

Dispose of packaging material at a public waste disposal site.

Disposal of Used Electrical and Electronic Equipment: The symbol on the product or its packaging indicates it should not be treated as household waste. Dispose of it at an appropriate collection point for recycling electrical and electronic equipment. This helps conserve natural resources and prevent negative impacts on the environment and human health.

For business entities in the European Union, request information from your seller or supplier.

For disposal in countries outside the European Union, request information from local authorities or your seller.

This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety.

FAST ČR, a.s. declares that the radio equipment type SEP 800 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.sencor.eu