User Manual for Unimeet models including: U333 Speakerphone, U333, Speakerphone
Shenzhen Youyou Electrical Appliances Ltd. U333 2BBW5-U333 2BBW5U333 u333
Unimeet U333 Speakerphone User Manual Introduction Thank you for purchasing the Unimeet U333 Speakerphone.This manual will provide you with instructions on how to use the speakerphone, make calls, and connect to devices. Know your new speakerphone Features 1. High-quality sound 2. Wireless connectivity 3. Easy to use 4. Portable and lightweight Usage Instructions Step 1:Turning On the speakerphone 1 Connect the USB cable to a power source. 2 The LED light on the speakerphone will turn Green when connected.The speakerphone now ready to pair with your Bluetooth-enabled device. Step 2: Pairing with a Bluetooth Device 1 Enable Bluetooth on your device and search for Bluetooth devices. 2 Select "Unimeet U333" from the list of available devices. Step 3: Making a Call 1 ·The speakerphone will automatically switch to pick up conversation from the device which connected with the Unimeet U333 2 ·Adjust the volume using the volume buttons on the side of the speakerphone. Step 4: Muting the Microphone 1 Press the mute button to mute or unmute the microphone during a call. 2 ·The LED light on the speaker will turn red when the microphone is muted. Step 5: Turning off the speakerphone Unplug the USB cord to turning off the speakerphone Important Notes 1) Keep the speakerphone away from water and other liquids. 2) Do not use the speakerphone in temperatures exceeding 150 degrees Fahrenheit 3) Do not use the speakerphone near electromagnetic devices (such as medical equipment). Conclusion The Unimeet U333 Speakerphone is a high-quality, portable speaker that can be used for conference calls and other hands-free communication. We hope this guide has provided useful instructions on how to use the speakerphone. If you have any further questions, please consult the product instructions or contact the manufacturer's customer service. FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user' s authority to operate the equipment. FCC Radiation Exposure Statement This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposureWPS 文字