i.clonephone.coloros.com/download
User Guide for realme models including: RMX3506, 2AUYFRMX3506, RMX3581, RMX3506, RMX3581 Smartphone, RMX3581, Smartphone
Realme Chongqing Mobile Telecommunications Corp., Ltd. RMX3581 2AUYFRMX3581 2AUYFRMX3581 rmx3581
File Info : application/pdf, 1 Pages, 3.57MB
DocumentDocumentEnglish realme Receiver Front Camera Proximity sensor & Light sensor Volume Key Power Key / Fingerprint Scanner realme How to Transfer Old Mobile Content to a New Mobile You can use realme Clone Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one. 1. If you have an old Android phone, first scan the QR code below, then download and install Clone Phone, next open Clone Phone on both the new and old phones, and follow the on-screen instructions to complete the operation. https://i.clonephone.coloros.com/download 2. If you have an old iPhone, open Clone Phone on the new phone directly, and follow on-screen instructions to sign in to iCloud account and sync the files. realme realme https://i.clonephone.coloros.com/download realme realme / FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Note: Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment. RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 1.5 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. RMX3581/RMX3506 16.5cm(6.5'') 164.1×75.6×8.5(mm) 4890mAh/18.92Wh(Min) 5000mAh/19.35Wh(Typ) 8Megapixels Front 5Megapixels Rear FCC SAR 0.73W/kg(Head) 0.33W/kg(Body) Radio Waves Specifications Radio Frequency 850MHz 900MHz GSM 1800MHz 1900MHz WCDMA Bands 1/5/8 Bands 2/4 Bands 1/2/3/4/66 LTE FDD Band 7 Bands 5/8/13/20/28 LTE TDD Bands 38/41 Bluetooth 2.4-2.4835GHz 2.4G Wi-Fi 2.4-2.4835GHz Max. Output Power 33.5dBm 33.5dBm 30.5dBm 30.5dBm 24.5dBm 24.0dBm 24.0dBm 23.5dBm 24.5dBm 24.0dBm 14.0dBm(EIRP) 21.5dBm(EIRP) Max. Output Power 33.5dBm 33.5dBm 30.5dBm 30.5dBm 24.5dBm 24.0dBm 24.0dBm 23.5dBm 24.5dBm 24.0dBm 14.0dBm(EIRP) 21.5dBm(EIRP) Frequency 850MHz 900MHz 1800MHz 1900MHz Bands 1/5/8 Bands 2/4 Bands 1/2/3/4/66 Band 7 Bands 5/8/13/20/28 Bands 38/41 2.4-2.4835GHz 2.4-2.4835GHz Radio GSM WCDMA LTE FDD LTE TDD Bluetooth 2.4G Wi-Fi RMX3581/RMX3506 ( 6.5) 16.5 164.1×75.6×8.5 4890mAh/18.92Wh(Min) 5000mAh/19.35Wh(Typ) 8 5 0.73W/kg 0.33W/kg FCC SAR This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AUYFRMX3581 For this device, the highest reported SAR value for usage against the head is 0.73W/kg, for usage near the body is 0.33 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 15 mm between the unit and the human body. Carry this device at least 15 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 15 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and use such body-worn accessory should be avoided. Regulatory Steps to search E-label : Go to Settings -About Phone - Certificate Information. RMX3581 RMX3506