Help - Choose2Rent
User Guide for Choose 2Rent models including: Lilitab Pro Desk Mount, Pro Desk Mount, Desk Mount, Mount
Choose 2 Rent Exclusive Desk Stand Setup Guide
File Info : application/pdf, 2 Pages, 203.34KB
DocumentDocumentRENTAL EQUIPMENT SETUP GUIDE Lilitab Pro Desk Mount Shipment Content: 1 x Countertop Basic Mount 1 x Compact Metal Base 4 x Compact Base Screws 1 x Phillips Screwdriver 1x Key Quick Setup: 1. To open the faceplate, squeeze & hold the 2 buttons at the back of the faceplate while sliding the bezel upwards (opposite to the RFID reader). 2. Connect the NFC reader to the USB charging cable, switch the toggle to Bluetooth and place it in the Lilitab case. 3. Connect the iPad to the lightning charging cable found inside the Lilitab case and then place the iPad in the Lilitab case. 6. Please follow the NFC reader connection steps from your registration software provider. Do not add Bluetooth device right away via iPad settings. 7. Place the completed faceplate onto the Mag Dock of Lilitab stand. It should sit tight and secure. 8. With the provided key, lock the case on to the desk stand. Keep the key secure for removal. 9. Adjust the viewing position by tilting the iPad up and down. 4. Secure the iPad into the case by sliding in the faceplate towards the NFC reader and clicking it into place. Verify it is properly locked. 5. Please follow the NFC reader connection steps from your registration software provider. Do not add Bluetooth device right away via iPad settings. 10. Once the iPad is set up and attached to the Lilitab floor stand, your device will be ready for use. Setup Video Guide: Scan this QR code with your phone camera for video. Contact our Support Team: www.choose2rent.com/help +1 (800) 622-6484 Ext. 3 (USA) RENTAL EQUIPMENT SETUP GUIDE Lilitab Pro Desk Mount Troubleshooting: What if... ... my NFC reader does not light up? ... my iPad is not charging? ... the viewing position won't remain fixed? 1. Inspect the cable at both the power cable and reader ends. 2. Rotate the iPad's faceplate to see if it charges in various orientations. 3. Ensure that the reader is powered on. 1. Inspect the cable at both the power cable and iPad ends. 2. Rotate the iPad's faceplate to see if it charges in various orientations. Use the supplied Allen wrench to adjust the viewing angle according to your preference. Setup Video Guide: Scan this QR code with your phone camera for video. Contact our Support Team: www.choose2rent.com/help +1 (800) 622-6484 Ext. 3 (USA)