User Manual for Prestel models including: VWC-HC14 Video Wall Controller 4K Video, VWC-HC14, Video Wall Controller 4K Video, Wall Controller 4K Video, Controller 4K Video, 4K Video
Контроллер видеостены, 4K видеовходы HDMI и USB-C, 1x4, Prestel VWC-HC14
The 18Gbps 1x4 Video Wall Controller is designed to realize truely capturing, AD converting, routing, and distributing all-format signal to.
File Info : application/pdf, 14 Pages, 2.75MB
DocumentDocumentPrestel VWC-HC14 18Gbps 1x4 Video Wall Controller USER MANUAL Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. Table of Contents 1. Introduction..................................................................................1 2. Features........................................................................................1 3. Package Contents......................................................................2 4. Specifications..............................................................................2 5. Operation Controls and Functions............................................4 6. IR Remote....................................................................................6 7. IR Cable Pin Assignment............................................................7 8. Video Wall...................................................................................7 9. RS-232 Control Command.........................................................8 10. Application Example..............................................................12 1. Introduction The 18Gbps 1x4 Video Wall Controller is designed to realize truely capturing, AD converting, routing, and distributing all-format signal to the video wall (LCD displays), while maintaining a true digital signal transmission. It features HDMI and USB-C input with resolution up to 4K@60 4:4:4, and 4 HDMI outputs. It supports multiple video wall modes to be set for video output. Furthermore, optical audio and L/R analog audio de-embedding output are also supported. It can be controlled via front panel buttons, IR remote and RS-232 commands. 2. Features HDMI 2.0, HDCP 2.2 and DP1.2a compliant Support HDMI input and USB-C input, and the resolution is up to 4K@60Hz 4:4:4 Support optical audio and L/R analog audio de-embedding output Support 8 video wall splicing modes: 1x1, 2x1, 3x1, 4x1, 1x2, 1x3, 1x4, 2x2 Support image 180° rotation, convenient for ceiling installation Support bezel adjustment for the splicing edge Advanced EDID management Control via front panel buttons, IR remote and RS-232 commands Simple plug and play, no drive and installation setting are required 1 / 12 3. Package Contents 1 × 18Gbps 1x4 Video Wall Controller 1 × 12V/1A Locking Power Supply 1 × Power Adapter 1 × IR Remote 1 × 5V IR Receiver Cable (1.5m) 1 × 3pin-3.81mm Phoenix Connector (male) 4 × Machine Screw (KM3*4) 2 × Mounting Ear 1 × User Manual 4. Specifications Technical HDMI Compliance HDMI 2.0b HDCP Compliance HDCP 2.2 Video Bandwidth 18Gbps Video Resolution Input: up to 4K@60Hz 4:4:4 Output: 720P60Hz, 1080P60Hz, 4K30Hz, 1024x768P60Hz Color Space RGB, YCbCr_4:4:4, YCbCr_4:2:2, YCbCr_4:2:0 Color Depth 8/10/12 bit IR Level 5Vp-p IR Frequency 38KHz Audio Formats HDMI IN/OUT: LPCM 2.0/5.1/7.1, Dolby Digital/Plus/EX, DTS, DTS-EX, DTS-96/24 L/R OUT: PCM 2.0 SPDIF(OPTICAL): Dolby Digital/plus, DTS 5.1, PCM 2.0 Audio Latency No Latency Video Latency No Latency 2 / 12 ESD Protection Human body model -- ±8kV (Air-gap discharge) & ±4kV (Contact discharge) Connection Input ports Output ports 1 × HDMI INPUT [Type A, 19-pin female] 1 × USB-C INPUT [Type C, 24-pin female] 4 × HDMI OUTPUT [Type A, 19-pin female] 1 × OPTICAL AUDIO OUT [S/PDIF] 1 × L/R AUDIO OUT [RCA] Control ports 1 × RS-232 [3pin-3.81mm phoenix connector] 1 × IR EXT [3.5mm, Stereo Mini-jack] Mechanical Housing Metal Enclosure Color Black Dimensions 220mm [W] × 100mm [D] × 30mm [H] Weight 590g Power Supply Input: AC 100-240V 50/60Hz, Output: DC 12V/1A (US/EU standard, CE/FCC/UL certified) Power Consumption 5.5W (Max) Operating Temperature 32 - 104°F / 0 - 40°C Storage Temperature -4 - 140°F / -20 - 60°C Relative Humidity 20 - 90% RH (no-condensing) Video Resolution 4K60 4K24 1080P60 HDMI Cable Length (HDMI IN / OUT) 8m/26ft 10m/32ft 15m/49ft The use of "Premium High Speed HDMI" cable is highly recommended. 3 / 12 5. Operation Controls and Functions 5.1 Front Panel 1 2 345 6 7 8 9 10 NO. Name Function Description In shutdown/standby status, press this button to power on; 1 Power button in power-on status, press this button for 2~3 seconds to enter standby status. 2 Power LED The LED will light in green when the product is working normally, and red when the product is on standby. 3 HDMI LED The LED will light in green when HDMI input is selected. 4 USB-C LED The LED will light in green when USB-C input is selected. 5 AUTO LED The LED will light in green when auto switching is enabled. 6 IR window IR signal receiving window. 7 HDMI button Press this button to select the HDMI input channel. 8 USB-C button Press this button to select the USB-C input channel. 9 MODE button Press this button to switch the 8 splicing modes circularly. 10 RES button Press this button to switch the resolutions of the four HDMI outputs circularly. 4 / 12 5.2 Rear Panel INPUT AUDIO OUT HDMI 1 USB-C OPTICAL L/R HDMI 1 2 34 VIDEO WALL OUT HDMI 2 HDMI 3 5 HDMI 4 TX RX RS-232 IR EXT DC 12V 6 78 NO. Name Function Description 1 HDMI INPUT HDMI signal input port, connected to an HDMI source device. 2 USB-C INPUT USB-C signal device. input port, connected to a USB-C source 3 OPTICAL Optical audio output port, connected to an audio output AUDIO OUT device such as an audio amplifier. 4 L/R AUDIO OUT Analog audio output port, connected to an audio output device such as a speaker. VIDEO 5 WALL OUT (HDMI1~4) HDMI signal output port, connected to TVs. 6 RS-232 3-pin phoenix connector, connected to a PC or control system for serial port upgrade or RS-232 command control. 7 IR EXT IR signal receiving port, connected with 38KHz IR Receiver cable. If the IR signal receiving window of the unit is blocked or the unit is installed in a closed area out of infrared line of sight, the IR receiver cable can be inserted to the "IR EXT" port to receive the IR remote signal. 8 DC 12V Connect to 12V/1A power adapter. 5 / 12 6. IR Remote INPUT HDMI USB-C Mute AUTO OUTPUT Rotation 1 2 3 4 720P 1080P 4K XGA VIDEO WALL 1×1 2×1 3×1 4×1 1×2 1×3 1×4 2×2 H-BEZEL V-BEZEL Power on or Standby: Power on the device or set it to standby mode. Mute: Turn off/on the audio output, including HDMI, Optical and L/R audio. HDMI: Press to select HDMI input channel. USB-C: Press to select USB-C input channel. AUTO: Press to disable or enable the input auto switching. Rotation 1/2/3/4: Press to switch rotation angle between 0° and 180° for the corresponding output channel. Resolution 720P/1080P/4K/XGA: Press to switch the resolution for the 4 output channels at the same time. VIDEO WALL MODE: There are 8 splicing modes: 1x1, 2x1, 3x1, 4x1, 1x2, 1x3, 1x4, 2x2. Press to select the display mode. H/V-BEZEL : Press to adjust the bezels of the splicing images. 6 / 12 7. IR Cable Pin Assignment IR Receiver pin's definition is as below: IR RECEIVER IR Receiver 8. Video Wall Video wall supports 8 splicing modes as below: IR Signal Power Grounding 1x1 1x2 1x3 1x4 2x2 2x1 3x1 4x1 User can set display modes via front panel buttons, IR remote, and RS-232 commands. Note: In the video wall mode (except mode 1x1), only the screens which are selected to perform video wall splicing will display images and their bezels can be adjusted. 7 / 12 9. RS-232 Control Command The product also supports RS-232 command control. Connect the RS-232 port of the product to a PC with a 3-pin phoenix connector cable and an RS-232 to USB cable. The connection method is as follows. TX Ground RX 3-pin Phoenix Connector RS-232 RS-232 to USB cable PC Then, open a Serial Command tool on PC to send ASCII command to control the device. The ASCII command list is shown as below. ASCII Command Serial port protocol. Baud rate: 115200 (Default), Data bits: 8, Stop bits:1, Check bit: 0 x - Parameter 1, y - Parameter 2, ! - Delimiter Command Code Function Description Example Feedback Default Setting System Setting help! List all commands help! r status! Get device current status r status! get the unit all status: power, video wall mode, output resolution... r type! Get device model r type! 1x4 video wall controller 8 / 12 Command Code Function Description Example Feedback Default Setting System Setting r fw version! Get firmware version r fw version! mcu fw version : x.xx.xx s power z! Power on/off the device, z=0~1 (z=0 power off, z=1 power on) s power 1! power on system initializing... initialization finished! mcu fw version x.xx.xx r power! Get current power r power! state power on /power off s reboot! Reboot the device s reboot! reboot... 1x4 video wall controller system initializing... initialization finished! mcu fw version : x.xx.xx s reset! Reset to factory defaults reset to factory defaults 1x4 video wall controller 1x4 video system wall controller initializing... initialization finished! mcu fw version : x.xx.xx 1.HDMI in; 2.EDID: 4K60 4:4:4 2ch; 3.audio mute off; 4.1x1 video wall mode; 5.1080p output; 6.All HDMI out no rotation; 7.H-Bezel=0, V-Bezel=0; 9 / 12 Command Code Function Description Example Feedback Default Setting Input Setting s input x edid z! Set input x edid mode (x=0~2, z=1~6) x=0. all input x=1. input1 x=2. input2 z=1. 4k60, 2.0ch z=2. 4k60, 5.1ch z=3. 4k30, 2.0ch z=4. 4k30, 5.1ch z=5. 1080p, 2.0ch z=6. 1080p, 5.1ch s input 1 edid 1! input 1 edid: 4k60, 2.0ch r input x edid! Get input x edid mode (x=0~2) x=0. all input x=1. HDMI in x=2. USB-C in r input 1 edid! hdmi in edid: 4k60, 2.0ch s output in source x! Route input source to output ( x=1~2) x=1. HDMI in x=2. USB-C in s output in source 1! output->hdmi in r output in source! Get output y selected input source r output in source! output->hdmi in 4k60,2.0ch output->HDMI in Output Setting s tw mode x! r tw mode! s tw h bezel +! Set tv wall display mode (x=1~8) x=1. 1x1 mode x=2. 2x1 mode x=3. 3x1 mode x=4. 4x1 mode x=5. 1x2 mode x=6. 1x3 mode x=7. 1x4 mode x=8. 2x2 mode Get tv wall display mode Set tv wall horizontal bezel s tw mode 1! tv wall mode: 1x1 tv wall mode: 1x1 r tw mode! tv wall mode: 2x2 s tw h bezel +! tv wall horizontal tv wall horizontal bezel: (bezel+1) bezel: 0 10 / 12 Command Code Function Description Example Feedback Default Setting Output Setting s tw h bezel -! Set tv wall horizontal bezel s tw h bezel x! Set tv wall horizontal bezel (x=0~10) s tw h bezel -! s tw h bezel 0! tv wall horizontal bezel: (bezel-1) tv wall horizontal bezel: 0 tv wall horizontal bezel: 0 tv wall horizontal bezel: 0 r tw h bezel! s tw v bezel +! s tw v bezel -! s tw v bezel x! r tw v bezel! Get tv wall row bezel r tw h bezel! Set tv wall vertical bezel s tw v bezel +! Set tv wall vertical bezel s tw v bezel -! Set tv wall vertical bezel s tw v (x=0~10) bezel 0! Get tv wall vertical bezel r tw v bezel! tv wall horizontal bezel: 0 tv wall vertical bezel: (bezel+1) tv wall vertical bezel: (bezel-1) tv wall vertical bezel: 0 tv wall vertical bezel: 0 tv wall vertical bezel: 0 tv wall vertical bezel: 0 tv wall vertical bezel: 0 s tw res x! Set tv wall resolution (x=1~4) 1.1280x720p60, 2. 1920x1080p60, s tw res 2! 3. 3840x2160p30, 4. 1024x768@60 (XGA) tv wall resolution: 1920x1080p60 tv wall resolution: 1920x1080p60 r tw res! s output y rotate x! Get tv wall resolution Set output y mirror (y=1~4, x=0,1) y=1. output 1 y=2. output 2 y=3. output 3 y=4. output 4 x=0. 0° rotation x=1. 180° rotation r tw res! s output 1 rotate 0! tv wall resolution: 1920x1080p60 tv wall resolution: 1920x1080p60 output1: 0° rotation output1: 0° rotation output2: 0° rotation output3: 0° rotation output4: 0° rotation r output y rotation! Get output y mirror status (y=0~4) y=0. output all y=1. output 1 y=2. output 2 y=3. output 3 y=4. output 4 r output 0 rotation! output1: 0° rotation output2: 0° rotation output3: 0° rotation output4: 0° rotation 11 / 12 Command Code Function Description Example Feedback Output Setting s output audio mute x! r output audio mute! Set output audio mute on/off (x=0~1) 0. mute off 1. mute on s output output audio audio mute 0! mute: off Get output audio mute r output audio output audio on/off mute! mute: off Default Setting off 10. Application Example PC 2.0 Speakers Amplifier IR Receiver H-BEZEL V-BEZEL 1×2 1×3 1×4 2×2 1×1 2×1 3×1 4×1 VIDEO WALL 720P 1080P 4K XGA 1 2 3 4 Rotation OUTPUT HDMI USB-C INPUT AUTO Mute INPUT AUDIO OUT HDMI USB-C OPTICAL L/R HDMI 1 VIDEO WALL OUT HDMI 2 HDMI 3 HDMI 4 TX RX RS-232 IR EXT DC 12V DVD or Blu-ray Player Laptop (with USB-C port) TV 1 TV 3 TV 2 TV 4 Power Supply The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 12 / 12Adobe InDesign 17.0 (Windows) Adobe PDF Library 16.0.3