User Manual for HOOKE ROAD models including: BXG.9820-S, BXG.9820-S Different Trail Rear Bumper, BXG.9820-S, Different Trail Rear Bumper, Rear Bumper, Bumper

BXG.9820-S安装说明书

Hooke Road Bumper Installation Instructions | Installation Manual – Hooke Road 4x4

PDF preview unavailable. Download the PDF instead.

BXG.9820-S ?v=1740391090
MAKE A DIFFERENCE

Roof Rack

BXG.9820-S
(INSTALLATION INSTRUCTION)

Please verify all parts are present and read instructions carefully before starting installation. Please feel free to contact your distributor if you have any kind of question about your purchase.

1 CONTENTS

C B B B

F2 D2

A: Front Faring B: Crossbars C: Rear Faring

F1 D1

B
B A

D1&D2: Side Rails E2 E1&E2: Front Mount Brackets

F1&F2: Rear Mount Brackets

E1

Qty

Part Name

Size(mm)

8

Hex Flange Bolts

M8*65

Picture

Qty

Part Name

36

Flat Washer

Size(mm) M8*16*1.5

Picture

28

Button Bolts

M8*20

16

Rubber Gasket

19*6.5*3

2 TOOLS REQUIRED

8

Flange Hex Lock Nuts

M8

To view online instruction, please scan the QR code.

Drive Ratchet Handle

13mm Wrench

5mm Hex Bit Socket

13mm Shallow Socket

3 INSTALLATION INSTRUCTION
Step 1 Remove the factory vehicle roof rack. Use a a easy door panel removal tool to remove the plastic cover, and then unscrew the factory screws.
Step 2 Install the crossbars to the side rails using the (20) M8x20mm button bolts, (20) M8x1.5x16mm flat washers. Do not tighten the hardware at this time.

Step 3
Install the front & rear farings to the side rails using the (8) M8x20mm button bolts, (8) M8x1.5x16mm flat washers, (8) M8 flange lock nuts. Tighten all bolts.













 

Step 4
Please differentiate the installation positions of the mounting brackets. The brackets are marked with D1, D2, P1, P2, corresponding to the driver's side front and rear, and the passenger's side front and rear.

Put the rubber gasket to the factory holes.

Step 5

Step 6
(Driver Side) Install the roof rack to the vehicle using the (4) M8x65mm hex flange bolts, (4) M8x1.5x16mm flat washers, (4) rubber gasket. Repeat this step for the opposite of the roof rack.
Front

 

 

Rear

The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Step 7

to find your parts.

Feel Free To Share Your Vehicle @HookeRoad4x4 With The Hashtag #hookeroad If You'd Like


Adobe PDF library 17.00 Adobe Illustrator 27.6 (Windows)