User Manual for DKS models including: Tony 2023-6-26 Smart Gate Controller, Tony 2023-6-26, Smart Gate Controller, Gate Controller, Controller
DKS Smart Gate Controller | Doorking - Access Control Solutions
DoorKing-User-manual-8-7-23 | Doorking - Access Control Solutions
Smart Gate Controller WI-FI:IEEE 802.11b/g/n Input:AC/DC 8-30V Output:NO TO PREVENT SERIUOS INJURY OR DEATH FROM YOUR MOVING GATE: %0/05MFUDIJMESFOVTFPSQMBZXJUIUIF4NBSU(BUFEFWJDFPS BQQ 0/-:PQFSBUFZPVS4NBSU(BUFEFWJDFXIFOZPVBSFJODMFBSWJFX PGZPVSHBUF BOEZPVIBWFWFSfiJ FEUIBUUIFSFBSFOPPCKFDUT PCTUSVDUJOHUIFPQFSBUJPOPGUIFEPPS "-8":4XBJUGPSUIFHBUFUPDPNQMFUFJUTDZDMFCFGPSFMFBWJOH UIFBSFB + - 8-30 V AC/DC Tesa Tape Gate Status Relay Output Door Magnet sensor with long cable connect to Gate Status Blue wire(optional) Set up your DKS Smart Connect account First, download DKS Smart Connect app for your iOS or Android device. Before setting up your Alarm, make sure you have the latest version of DKS Smart Connect from the app store %,44NBSU $POOFDU 3 Please refer to gate operator manual for proper input/output connections Relay contact set for N.C., relay output set to activate when gate is fully open Gate Status Output if applicable 8-30AC/DC WI-FI:IEEE 802.11b/g/n Input:AC/DC 8-30V Output:NO 4 c"Only supports 2.4 Ghz WiFi" under Check the Wi-Fi signal at the gate, where the Smart Gate Controller will be mounted. 8-30V power source (AC/DC). Smart Gate Controller by connecting it to an 5 Add Smart gate device to DKS Smart Connect app *** Turn on smart phones bluetooth and Connect smartphone to your home WIFI network before the following steps. Have your SSID WiFi name ready, with WiFi password if asked. 1. Launch the app and tap the Plus ( + ) in the top right corner to add a Cont roller devic e. 2.Press Smart Switch Button until LED flashes. Tap Go to add. 6 4. Now your DoorKing Smart Gate is succes s fully added to DKS Smart Connect app. Tap Done . 7 POWER OFF your existing gate operator -Connect the two Yellow wires of the controller to the gate operator open input terminals -Connect the Red wire to 8-30 VAC/VDC positive -Connect the Black wire to common -Connect the two Blue wires to the gate operator status output relay if applicable 8 DoorKing Smart Gate ConDtKrSolSlemrart Switch Function Description of the Operation InterfaAcppelication DKS Smart Connect App ü Main Screen: Ø Select your added device to control your gate or to edit: Ø Main control screen. Name you smart switch, along with other options. DoorKing Smart Gate Shows gate status if open or close. Only Available when gate timer is on from the operator and enabled from app settings "Is your gate timer enabled." If gate timer is off from operator, close will close it from previous "Open" command. If gate timer is on, you will use "Close" to close from a previous "Hold Open "command. If gate timer is off from operator "Open" will open select "Close" to close, If gate timer is on from operator, timer from operator will auto close. Setup: Open/Close Notifications, If gate timer is enabled, Gate run time, Voice control Open/Close Notifications, If gate timer is enabled, Gate run time, Voice control View open/close history log with date and time. Create auto open/close times by dates. 9 ü Edit name and other options: DoorKing Smart Gate Ø Select to make adjustement as described below. Rename Device, Device Info, Share Device, Add to home screen, Check device network, Device Update Name or rename your smart switch, DoorKing Smart Gate View smart switch IP address, MAC address, WiFi signal strength, Not Used Link to your smart voice assistant devices Enable notification to phone, if device stays offline for over 30 minutes, Share device to others, by SMS text or e-mail, Create a fast shortcut to desktop showing the name of the switch, Check WiFi signal to switch (Cell phone must be connected to the same network as the switch), reading should be no higher than 70 dbm 10 Ø Device can be removed from here. ü Settings: Ø Select to make adjustments as described below Select your gate operating closing settings: - If gate operator is set to time out and close- Move slider to the right enable (Yes) - If gate operator timer to close is off Move slider to left disable (No) Enable/Disable notifications to cell phone, Enable voice assistant devices (Alexa, Google) Not Used Set gate open/close limit timing so if not reached after the set time, a warning message will pop up Set for Google Assistant if used. 11 ü History: Ø Select to view log history of Open/Close/Hold Openevents with date and . ü Schedule: Ø Select to set an auto open / close . Create a beginning time with days the gate should go open 12 Create an end time with days the gate should go back to close Alexa,Google Home, Siri can't support control "Hold Open" Alexa Alexa, open the DoorKing Smart Gate. Alexa, close the DoorKing Smart Gate. Google Home Hey Google, open the DoorKng Smart Gate. Hey Google, close the DoorKing Smart Gate. Siri Hey Siri, open the DoorKing Smart Gate. Hey Siri, close the DoorKing Smart Gate. 13 14 Doorking Smart Gate 15 DKS Smart Connect DKS Smart Connect DoorKing Smart Gate 16 17 18 Set up Siri to control the Doorking Smart Gate Siri can only be used when logged as primary user 1.Log in the " DKS Smart Connect "app, select " Scene " at the bottom. 2.Tap" +", Select " Launch Tap To Run ",Select" Add Task ", Select" Run the device ". 3.Select" DoorKing Smart Gate ", then select " Action ", then select" Open " or " close ", click " Save ", clink " Next ", and clink " Save " again (please note Siri can't support control "Hold Open ") 19 4.Back to the " Scene "page, tap the " Add to Siri " icon at the right bottom. Select the tab " Dooking Smart Gate " Action: Open or Close. 5.Select " Done ". Now your can say " the magic word " control the Dooking Smart Gate. 20Adobe Illustrator CC 2014 (Windows) Adobe PDF library 11.00