Outline P15 Coaxial Loudspeaker

Safety Regulations

Please follow these guidelines for safe and proper use to avoid risks to personal safety or warranty issues.

• This unit is designed for sound reinforcement or audio recording systems. Use beyond the manufacturer's intended purpose is the user's responsibility.
• Do not expose the unit to rain or use in high humidity areas or near water.
• Prevent liquids or solid objects from entering the unit. If this occurs, cease use and contact an authorized service center.
• Connect the unit ONLY to the amplified output of an amplifier, powered mixer, or similar unit. Use a suitable power cable meeting current safety standards.
• Before powering on, ensure all other system components are connected and switched on to prevent potential damage from disruptive noises.
• Move the unit only when cables are disconnected.
• Use only dedicated or standard accessories designed for the system.
• Periodically inspect the mechanical operation of the product and accessories.
• This unit can produce high sound pressure levels that could damage hearing under incorrect conditions.
• Do not attempt to open or repair the unit yourself; seek help from specialized personnel.
• For technical assistance, contact OUTLINE or their authorized staff.

Disposal of Waste Materials

This product is made with high-quality, recyclable materials. The crossed-out wheeled bin symbol indicates it is covered by European Directive 2012/19/EU. Do not dispose of with other waste. Dispose of electrical and electronic equipment through an approved re-processor. Contact your local distributor for recycling information. Proper disposal helps prevent negative environmental and health consequences.

Conformity

All Outline electro-acoustic and electronic devices conform to EC/EU directives, as stated in the CE Declaration of Conformity.

CE Declaration of Conformity

OUTLINE SRL declares that its electro-acoustic and electronic audio low frequency professional products are manufactured in ITALY according to stated standards and directives. Technical files are compiled by Outline s.r.l.

• Directive 2006/42/CE "Machinery Directive"
• Legislative Decree 17 of 27/01/10
• Legislative Decree 81 of 9/04/08
• Directive 2014/35/EU, "Low Voltage"
• Directive 2014/30/EU, "Electromagnetic Compatibility"
• Directive 2003/10/CE (Legislative Decree 195/06), "Protection from noise"
• Directive 2011/65/UE (RoHS)
• Legislative Decree 195 of 10/04/06
• UNI EN ISO 12100 (2010)
• UNI EN ISO 13857 (2020)
• UNI EN ISO 13854 (2020)
• UNI EN ISO 13850 (2015)
• UNI EN 614-1 (2009)
• UNI EN 614-2 (2009)
• UNI EN 894-1 (2009)
• UNI EN 894-2 (2009)
• UNI EN 894-3 (2009)
• UNI EN ISO 14120 (2015)
• UNI EN 981 (2009)
• UNI EN ISO 13849-1 (2016)
• UNI EN ISO 13855 (2010)
• UNI EN ISO 14188 (2018)
• UNI EN ISO 13856-2 (2013)
• UNI EN ISO 4871 (2009)
• CEI EN 60204-1 (2018)
• CEI EN IEC 60947-1 (2021)
• CEI EN 60446 (2008)
• CEI EN 61310-1 (2008)
• CEI EN 61310-2 (2008)
• UNI EN 1990 (2006)
• UNI EN 1991-1-1 (2004)
• CEI EN 62368-1:2014+A11:2017
• CEI EN 61000-6-4
• CEI EN 61000-6-2
• CEI EN 55032:2015, EN 55032:2015/A11:2020
• CEI EN 55035:2017, EN 55035:2017/A11:2020
• CEI EN 61000-3-2:2014
• CEI EN 61000-3-3:2013
• EN IEC 63000:2018

Stefano Noselli - Production and Purchase Director
Release date 20 June 2025

Amplifier Connection

The P15 loudspeaker features a woofer and compression driver with a passive crossover. It has two NL4 connectors and can be used in mono-amp or bi-amp mode. To switch modes, remove the four screws securing the connection panel and reposition the Euroblock connector to the desired setting, visible through the inspection window.

An Outline amplifier is required. Refer to the preset guide on www.outline.it for amplifier settings.

Mono-amp Connection

WARNING: DO NOT ATTEMPT TO CONFIGURE FOR BI-AMP OPERATION UNLESS STRICTLY IMPLEMENTING THE INSTRUCTIONS FROM USER MANUAL.

CAUTION: WARRANTY VOID UNLESS DRIVEN BY SUITABLE SIGNALS.

Bi-amp Connection

WARNING: DO NOT ATTEMPT TO CONFIGURE FOR BI-AMP OPERATION UNLESS STRICTLY IMPLEMENTING THE INSTRUCTIONS FROM USER MANUAL.

CAUTION: WARRANTY VOID UNLESS DRIVEN BY SUITABLE SIGNALS.

Diagrams illustrating mono-amp and bi-amp connections are provided, showing wiring for HF and LF drivers.

Rigging Instructions

The system offers multiple rigging options. It features four M8 screws on the rear panel, three M8 fixing points on top, and three M8 fixing points on each side (left, right, rear) for secure installation using various rigging accessories. Outline recommends a secondary safety device for rigged systems.

The loudspeaker can be mounted on a 35 mm speaker stand using the A ADAPT36-M8 adapter or by replacing the M8 fixing point with the A STREC35-01 accessory.

Refer to the datasheet for a variety of available rigging accessories.

Diagrams showing M8 accessory sockets and fixing points are provided.

P15 Technical Specifications

*AES75-2023 max. linear sound level;

(1) RMS input level of -5 dBV (0,562 V); (2) RMS input level of -4 dBV (0,631 V); (3) RMS input level of -2 dBV (0,794 V); (4) RMS input level of -1 dBV (0,891 V); (5) RMS input level of 0 dBV (1,0 V)

Physical Specifications

Shipping Details