Lufeiya L-Shaped Computer Desk Assembly Instructions
Important Information and Parts List
Important Notes
- It is recommended to have two people for the installation to significantly improve efficiency.
- Before beginning, lay out all parts on a non-abrasive surface to identify the number tags in the manual and count before assembly. Use screws correctly to avoid damaging the desk panel.
- For a smooth assembly process, keep screws lightly tightened during assembly. Firmly tighten all screws once the desk is fully assembled.
Parts List
Main Components:
- A: Desktop Panel (x1)
- B: Side Panel (x1)
- C: Shelf Panel (x2)
- D: Back Support Panel (x2)
- E: Side Support Panel (x1)
- F: Long Support Bar (x2)
- G: Short Support Bar (x2)
- H: Vertical Support (x1)
- I: Vertical Support (x1)
- J: Drawer Slide Mechanism (x2)
- K: Drawer Box (x1)
Hardware:
- 1: M6x50 Screws (x2)
- 2: Specialized Desktop Lock Screws M6x35 (x4)
- 3: Specialized Desktop Lock Screws M6x30 (x4)
- 4: M6x25 Screws (x2)
- 5: M6x12 Screws (x4)
- 6: Ø8x15 Screws (x2)
- 7: Ø6x50 Screws (x8)
- 8: Ø3.5x15 Screws (x2)
- 9: M8x40 Screws (x4)
- 10: Ø25xM6x15 Connectors (x6)
- 11: Ø9 Connectors (x4)
- 12: S4 Screws (x1)
Note: The desktop can only be fixed with screws 2 and 4, which may come in different colors. Please use the correct screws for assembly.
Assembly Instruction: Option ①
Step 1
Assemble the frame with vertical supports (H, I) and back support panels (D). Ensure the 4 holes on the vertical supports face the same side. Use screws (3) and (7).
Step 2
Attach the shelf panels (C) to the assembled frame using screws (3) and (7).
Step 3
Attach the side support panel (E) and side panel (B) to the frame. Ensure the side panel (B) has holes facing inwards. Use screws (3) and (7).
Step 4
Attach the desktop panel (A) to the assembled structure. Use screws (2) and (4). Ensure a snug fit without gaps before fully tightening.
Step 5
Attach the drawer slide mechanisms (J) to the side panel (B) and the underside of the desktop (A). Push the drawer box (K) into the slides.
Step 6
Attach the long support bars (F) and short support bars (G) to the frame using the appropriate screws (5, 6, 8, 9, 10, 11, 12).
Step 7
Final assembly of the desk structure, including the drawer unit.
Step 8
Completed desk assembly for Option ①.
Assembly Instruction: Option ②
Step 1
Assemble the frame with vertical supports (H, I) and back support panels (D). Ensure the 4 holes on the vertical supports face the same side. Use screws (3) and (7).
Step 2
Attach the shelf panels (C) to the assembled frame using screws (3) and (7).
Step 3
Attach the side support panel (E) and side panel (B) to the frame. Ensure the side panel (B) has holes facing inwards. Use screws (3) and (7).
Step 4
Attach the desktop panel (A) to the assembled structure. Use screws (2) and (4). Ensure a snug fit without gaps before fully tightening.
Step 5
Attach the drawer slide mechanisms (J) to the side panel (B) and the underside of the desktop (A). Push the drawer box (K) into the slides.
Step 6
Attach the long support bars (F) and short support bars (G) to the frame using the appropriate screws (5, 6, 8, 9, 10, 11, 12).
Step 7
Final assembly of the desk structure, including the drawer unit.
Step 8
Completed desk assembly for Option ②.
Customer Support
Thank you for choosing Lufeiya. Please share your product experience. Feel free to contact Lufeiya in case of any problems regarding assembly or the product itself. Your satisfaction is our highest pursuit.
