PROMETHEUS GROUP LLC BTC-DWPS-AV Hunting Camera User Manual

Introduction

This document serves as the user manual for the PROMETHEUS GROUP LLC BTC-DWPS-AV hunting camera. It provides essential information for setup, operation, and maintenance of the device.

Product Overview

The PROMETHEUS GROUP LLC BTC-DWPS-AV is designed for wildlife monitoring and surveillance. Key features include advanced motion detection, high-resolution image and video capture, and durable weather-resistant construction.

Brand: PROMETHEUS GROUP LLC

Model: BTC-DWPS-AV

Getting Started

This section covers unboxing, battery installation, and initial setup procedures.

Step 1: Unpack the camera and accessories. Ensure all components are present.

Step 2: Insert batteries (typically 8x AA batteries) and a compatible memory card (e.g., SD or SDHC, up to 32GB) into their respective slots.

Step 3: Set the date and time using the camera's interface to ensure accurate timestamping of captured media.

Operation

Details on how to operate the camera, including selecting modes, configuring settings, and understanding triggering mechanisms.

Modes: The camera supports Photo, Video, and Hybrid modes. Select the desired mode via the mode dial or menu.

Settings: Key settings include resolution (e.g., 12MP photo, 1080p video), sensitivity (Low, Medium, High), delay between captures, and time-lapse intervals.

Maintenance and Care

Instructions for keeping the camera in optimal condition.

Cleaning: Use a soft, dry, lint-free cloth to clean the lens and camera body. Avoid abrasive materials or liquids.

Battery Replacement: Replace batteries when the low battery indicator appears. Ensure correct polarity.

Storage: When not in use, store the camera in a cool, dry place, preferably in its original packaging or a protective case.

Troubleshooting

Common issues and solutions.

Issue: Camera not turning on.

Solution: Verify batteries are correctly inserted and fully charged. Ensure the power switch is in the 'ON' position.

Issue: No images/videos captured.

Solution: Check that a memory card is inserted and formatted correctly. Ensure the motion sensor is not obstructed and the camera is properly aimed.