Installation Guide for PU R models including: GFCI Replacement Plug, GFCI, Replacement Plug, Plug

701-G-0134 GFCI REPLACEMENT GUIDE PÜR (CANADA ENGLISH)

In order to change the casing of a defective GFCI plug, follow these steps

6 Make sure the small pad is placed against the panel and close the plug; 5 Add the metal plate and screw. Make sure to put it on the right side as above: Questions? For any questions, please contact our service department: 1 866 995-8646, ext 226 or 227

701-g-0134-gfci-replacement-guide-pur-canada-english

Index of /wp-content/uploads/2023/05

DOWNLOAD THE GUIDE HERE

FAQ - Pür Spas

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 3 Pages, 2.53MB

Document Document

HOW TO CHANGE THE GFCI CASING
In order to change the casing of a defective GFCI plug, follow these steps:
REQUIRED PARTS
You will need:
· New GFCI plug · A screwdriver Parts are available from your local retailer.
1 Make sure that the length of the drawn wire matches the illustration:

AB C

2 The wires have a specific position according to their color: A. The yellow screw - black/blk B. The green screw - green/grn C. The silver screw -white/wht

3 Place one wire at a time in its position, according to the color. Be careful, each wire must be insertedto the very bottom;

4 Tighten each screw;

5 Add the metal plate and screw. Make sure to put it on the right side as above:

X

6 Make sure the small pad is placed against the panel and close the plug;
Questions? For any questions, please contact our service department:
1 866 995-8646, ext 226 or 227