BUBLUE C10P Robotic Pool Cleaner User Manual
Thank you for choosing the BUBLUE C10/C10P Robotic Pool Cleaner. This manual provides a comprehensive guide to operating, maintaining, and maximizing the performance of your cleaner.
Important Safety Instructions
Please read and follow all safety instructions carefully before using the cleaner. Key safety points include:
- Do not use the cleaner outside its operating limits.
- Use only genuine or recommended accessories.
- This cleaner is not intended for unsupervised use by children or individuals with mental impairments.
- Always remove the cleaner from the pool before charging. Ensure the cleaner and charger are dry before charging.
- Use only the original charger.
- Ensure the unit is powered off before charging.
- Charge using a grounded outlet protected by a ground fault circuit interrupter.
- Do not use the charger for other devices.
- Avoid repeatedly plugging/unplugging the charger.
- Keep people out of the pool during operation.
- Never power on the cleaner when it is out of water.
- Clean the filter basket after each use.
- Store the cleaner in a cool, ventilated indoor area, away from direct sunlight.
- Only trained professionals should disassemble the cleaner.
- Recharge the cleaner before the battery is completely depleted.
- Avoid charging near fire or extreme heat.
1. Introduction
The BUBLUE C10P Robotic Pool Cleaner is an efficient device designed to keep your pool sparkling clean by capturing floating debris and sediment with its advanced filtration system. It is powered by a lithium-ion battery, ensuring safety and reliability. Please read this manual to ensure optimal performance.
2. Packing List
Your BUBLUE C10P package includes:
- Robotic Pool Cleaner X 1
- Charger X 1
- Hook X 1
- User Manual X 1
- Quick Start Guide X 1
3. Safety Guidelines
- Charging: Remove the cleaner from the pool before charging. Ensure both the cleaner and charger are indoors or in a covered area protected from rain. Ensure they are dry before charging.
- Do Not Operate While Charging: The cleaner should not be turned on while charging.
- Operating Temperature: Use the cleaner in environments with temperatures between 50°F and 95°F (10°C to 35°C).
- Charging Temperature: Charge the cleaner in environments with temperatures between 41°F and 95°F (5°C to 35°C). Allow the unit to cool if it becomes too hot during charging.
- Charge Before Battery Depletes: Stop using and charge the battery when power is low.
- Avoid Overcharging: Do not charge a full battery, as this can reduce its lifespan.
- Long-term Storage: If storing for an extended period, charge every three months to maintain battery health (around 40%-60% capacity). Failure to charge may lead to permanent damage.
4. Product Specifications
| Specification | Details |
|---|---|
| Charger's Input Voltage | 100Vac-240Vac, 50Hz/60Hz |
| Rated Output Voltage of the Charger | 21V |
| Rated Output Current of the Charger | 4A |
| Maximum Runtime | Up to 240 minutes |
| Battery Capacity | 10,400mAh |
| Charging Time | 3.4 h |
| Waterproof Rating | IPX8 |
| Maximum Coverage Area | 120 m² |
| Maximum Cleaning Depth | 3 m |
| Filtration Capacity | 180μm |
| Flow Rate | 13m³/h |
| Weight | 10.2 kg |
| Storage Temperature | 5°C to 35°C |
5. Operating Instructions
5.1 Cleaner Setup
Position the cleaner with its bottom facing the pool wall and lower it into the water using the handle. Turn on the cleaner and allow it to release trapped air. Once all air is expelled (approx. 20 seconds), the cleaner will begin operating. Ensure all air is expelled for proper functionality. Allow the cleaner to settle at the bottom of the pool.
Button Guide:
- Power Button: [Power Symbol]
- Floor Mode: Selects floor cleaning mode.
- Wall Mode: Selects wall climbing mode.
- Auto Mode (Wall and Floor) / WIFI & Bluetooth Connection: [Wi-Fi Symbol]
Indicator Light Guide:
| Operating Status | Indicator Light Display |
|---|---|
| Normal Operation | Blue light constant (40%-100%) |
| Parking Near The Wall (Lower Power) | Orange light constant (20%-40%) |
| Charging | Yellow light constant (<20%) |
| Charging Complete | Yellow light flashing |
| Fault (Refer to Section 7. Troubleshooting) | Green light flashing |
| Green light constant | |
| Red Light On |
5.2 Retrieval & Battery Charging
After completing its cycle, the cleaner will park near the pool wall. Use the provided hook to retrieve it. Ensure the cleaner is powered off. Place the cleaner and charger indoors or in a sheltered area away from water. The green light will flash during charging and remain solid green when charging is complete.
5.3 Filter Basket Cleaning & Installation
- Removing the filter basket: Place the cleaner on the pool's edge. Press the indicated position on the main cover to open it and access the filter basket.
- Remove the filter basket from the machine.
- Filter basket cleaning: Rinse the debris from the filter mesh thoroughly with clean water.
- Reinstall the filter basket: Align the filter basket with the outlet and place it inside the cleaner. Close the main cover securely.
6. App
6.1 Download & Installation
Search for the "Bublue" app in the Apple Store or Google Play and download/install it on your smartphone.
6.2 Registration & Connection
- Registration: Open the app and follow the on-screen prompts to register your account. Options include logging in, signing up with email, continuing with Google, or signing in with Apple.
- Log in: Enter your credentials or use a preferred login method.
- Bluetooth Connection: Tap "Bluetooth Connection".
- Add Device: Select your cleaner model (e.g., "Bublue-C10P") from the list of available devices.
- Set Knob to AUTO: Turn the cleaner's knob to the "Auto" mode to establish a connection.
- Confirm Connection: Check the "I have turned the knob to "Auto" mode" box and tap "Next".
- Select Bluetooth Device: Choose your cleaner from the list of available devices (e.g., "Bublue-C10P-0400004AEC24").
- Allow Location Access: Allow "Bublue" to use your location to get Wi-Fi information. This data is not collected, stored, or recorded.
- Network Configuration: Wait for the network configuration to complete.
- Enter Wi-Fi Details: Enter your Wi-Fi SSID and password. Note: This device only supports 2.4G Wi-Fi signals.
- Success: Your device is ready. Tap "Complete".
6.3 Setup
- Access Dashboard: Tap the dashboard icon.
- Select Cleaning Settings: Choose a cleaning mode, duration, and path width (e.g., "Floor" mode, "2H" duration, "Normal" path width).
- Start Cleaning: Place the cleaner into the water. It will start working automatically after 5 seconds.
6.4 OTA (Over-The-Air) Updates
- Access Settings: Tap "Settings".
- Firmware Update: Tap "Firmware Update".
- Initiate Update: Select "Update Now" to begin the update process.
- Download and Install: The update will download and install automatically. Do not turn off the cleaner during this process.
- Confirmation: Once the update is complete, you will receive a confirmation message. Tap "Got It".
7. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Abnormal Operation (Poor Coverage, Inconsistent Wall Climbing, Erratic Movement) | Temporary software glitch | Place the cleaner on a horizontal surface, charge for 1 minute to reset it. Turn the power button on again to restart. |
| Blue/Orange/Yellow Light Flashing | The Cleaner was not placed in water promptly after being powered on | Turn the power button on again to restart the cleaner. |
| Red Light Flashing | Cleaner out of control | Turn the power button again to restart the cleaner. |
| Red Light Constant | The Cleaner was lifted out of the water without being powered off | Turn off the cleaner to clear the alarm and resume normal charging. |
| Yellow Light Flashing | Charging the cleaner while powered on | Turn off the cleaner and clear the debris. |
| Cleaner Unable to Charge | Debris sucks in the impeller or treads | Clean the filter net and empty the filter basket. |
| Hardware malfunction | Contact customer support. | |
| Battery depleted | Charge the cleaner to restore normal operation. | |
| The power outlet has no voltage | Check if the power outlet has voltage or try a different power outlet. | |
| The power cord is not correctly connected to the power inlet | Ensure the power cord is securely connected to the power source. | |
| Loose connection between the charging adapter and the cleaner | Check the cable connections at both ends (adapter and cleaner). | |
| Faulty charging adapter | Disconnect the adapter from the cleaner and check if the LED light turns green. If not, replace the charger. | |
| Water in the charging port | Dry the charging port and try again. | |
| Cleaner Moves Slowly or Cleans Inefficiently | Filter basket blockage | Clean the filter net and empty the filter basket. |
If these suggested solutions do not solve your problem, please contact the BUBLUE customer support team.
8. Warranty
- This product is covered by a 24-month BUBLUE warranty (applicable to the motor, PCB, charger, and battery) from the date of purchase.
- Consumable parts (filter tray, brush, wheels, nozzles) are not covered.
- The warranty is void if the product is altered, misused, or repaired by unauthorized personnel.
- The warranty covers manufacturing defects only and does not include damage from improper handling.
- A valid order number or proof of purchase is required for all warranty claims.
