Ermenrich Zing CT30 Auto Tester

Product Overview

The Ermenrich Zing CT30 Auto Tester is a device designed for testing automotive circuits. It allows users to measure current, check fuses, and identify circuit issues.

The device features a digital display, a plug for connecting to the vehicle's fuse socket, and a power button. It operates using a 12V 23A battery.

Diagram of Components

The tester consists of the following main components:

• 1. Plug: Connects to the vehicle's fuse socket.
• 2. Fuse jack: Houses the included blade fuse or the vehicle's fuse.
• 3. Display: Shows the measured values.
• 4. Power button: Turns the device on and off.
• 5. Battery compartment: Holds the 12V 23A battery.

Getting Started

To begin using the Ermenrich Zing CT30 Auto Tester:

1. Open the battery compartment cover.
2. Insert a 12V 23A battery.
3. Close the battery compartment cover.

Usage Instructions

1. Turn off the vehicle's ignition.
2. Remove the vehicle's fuse from its circuit and insert it into the tester's fuse jack (2). This ensures proper circuit protection.
3. Insert the tester's plug (1) into the vehicle's fuse socket.
4. If necessary, turn on the vehicle's ignition to energize the circuit.
5. Press the power button (4) to turn on the device. The measured value will be displayed on the screen.
6. Press the power button (4) again to turn off the device.
7. When the [low battery icon] appears on the screen, replace the battery.

Specifications

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and Maintenance

Use the device only within its permitted range. Do not use the device if it is not working properly. Ensure that the power supply parameters comply with the device's technical characteristics. Do not attempt to disassemble the device yourself for any reason. For repairs and cleaning, please contact a local specialized service center. Protect the device from sudden impacts and excessive mechanical force. Store the device in a dry, cool place. Use only accessories and spare parts that comply with the technical specifications. Never attempt to operate a damaged device or a device with damaged electrical parts. If any part of the device or battery is swallowed, seek medical attention immediately.

Battery Safety Instructions

Always purchase the correct size and grade of battery suitable for the intended use. Always replace the entire set of batteries at one time, and do not mix old and new batteries or batteries of different types. Clean the battery contacts and the device's contacts before installing batteries. Ensure batteries are installed correctly with regard to polarity (+ and -). Remove batteries from equipment that will not be used for an extended period. Remove used batteries promptly. Never short-circuit batteries, as this can lead to high temperatures, leakage, or explosion. Never heat batteries to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children to avoid the risk of ingestion, suffocation, or poisoning. Dispose of used batteries according to your country's laws.

Ermenrich Warranty

Ermenrich products, excluding accessories, carry a 5-year warranty against defects in materials and workmanship. Ermenrich accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to free repair or replacement of the Ermenrich product in any country where a Levenhuk office is located, provided all warranty conditions are met.

For further details, please visit: ermenrich.com

If warranty problems arise, or if you need assistance in using your product, contact your local Levenhuk branch.