FIRSTECH FTI-STK1 Wrx Std Key Mt

FTI-STK1: Kev Npaj Tsheb thiab Kev Pabcuam

Ua	Qauv	Xyoo	Nruab	YOG	IMMO	BCM	Clutch	I/O Hloov
Subaru	WRX STD KEY MT (Canada)	2022-23 : kuv	npe 5	20- Pin	B	DSD	Lt. Ntsuab	Ntsuab Dawb / Xiav

Daim ntawv tsheb
Lub tsheb npog siv BLADE-AL-SUB9 firmware thiab cov khoom siv hauv qab no: WebTxuas Hub thiab ACC-RFID1. Hloov kho thiab qhib lub maub los firmware. Ua raws li cov lus qhia rau RFID programming ua ntej sim ua lub tsheb lub BLADE module.

YOG
CAN kev sib txuas (Hom 5) yog ua rau 20-pin BCM adapter thiab yuav tsum tau txuas cov khoom sib txuas dawb rau tus cim [D] hauv qhov piv txwv.

Immobilizer
IMMO hom B yuav tsum tau txuas cov dub thiab dawb 2-pin connectors rau tus cim [C] hauv cov duab.

Teeb
Lub teeb nres tsheb yog pre-cabled hauv FTI-STK1 hlua. Hloov cov hlua khi ntsuab/dawb txuas nrog lub hlua khi dawb/xiav.

ACC-RFID1 (yuav tsum tau)
Lub SUB9 firmware tsis muab cov ntaub ntawv immobilizer, yog li yuav tsum muaj ACC-RFID1 rau cov chaw taws teeb pib.

Clutch (2nd Pib)
FTI-STK1 harness yog pre-cabled nrog 2nd START liab / dub xaim (yuav tsum tau nyob rau hauv "HOM 5"), txuas mus rau 2nd txoj hauj lwm ntawm 10-pin connector ntawm lub ignition hloov, nyob rau ntawm lub clutch pedal. Ua cov kev hloov pauv hauv qab no kom tso zis tawm. Xyuas kom tseeb tias qhov no yog qhov tsim nyog los zam kev txiav tsis tsim nyog.

I/O Hloov
CM7: Tus choj 3 tau tsiv mus rau qhov chaw pib. CMX: HCP #1, configuration [2] (2nd START).

Ceeb toom

Ceeb toom 1: Program ACC-RFID1 ua ntej sim ua qhov kev pab cuam BLADE module hauv lub tsheb.
Ceeb toom 2: Xyuas kom tag nrho cov kev sib txuas 2-pin, ob qho tib si siv thiab tsis siv, txuas nrog lub cev tseem ceeb.

FTI-STK1 - Kev teeb tsa thiab kev teeb tsa

• A: Yuav tsum tau Accessory
• B: Yuav tsum muaj Adapter
• C: Yuav tsum tau Configuration (Hom B IMMO)
• D: Tsis muaj kev sib txuas
• E: Yuav tsum muaj kev sib txuas

Muaj nuj nqi Coverage

Muaj nuj nqi	xwm txheej
Cov ntaub ntawv Immobilizer	Muaj
Arm OEM tswb	Muaj
Disarm OEM tswb	Muaj
Qhov rooj xauv	Muaj
Qhov Rooj Xauv	Muaj
Qhov tseem ceeb Unlock	Muaj
Lub cev/Hatch tso tawm	Muaj
Tach tso zis	Muaj
Qhov rooj xwm txheej	Muaj
Lub cev Status	Muaj
Nres Status	Muaj
E-Brake xwm txheej	Muaj
A / M tswb tswj los ntawm OEM chaw taws teeb	Muaj
A / M RS Tswj los ntawm OEM Chaw Taws Teeb	Muaj
Autolight Control	Muaj

Jumper Settings
FT-DAS Yuav tsum tau siv rau kev sib kis. Liab & Liab / Dawb yuav tsum tau txuas nrog ntau dua daim ntawv thov tam sim no.

CMX High Current Programmable (+) Output Channels

• HCP #1 – Chaw nres tsheb teeb
• HCP #2 – Accessory
• HCP #3 - Ignition

[2] 2ND PIB, [3] 2ND IGNITION, [4] 2ND ACCESSORY

Daim ntawv qhia kev teeb tsa

Cartridge Installation

1. Swb lub cartridge rau hauv chav tsev. Daim ntawv ceeb toom khawm hauv qab LED.
2. Npaj rau Module Programming Procedure.

Module Programming txheej txheem

1. Rau lub installation no, lub Weblink HUB yog yuav tsum tau.
2. Tshem tawm OEM yuam sij 1 ntawm keychain.
3. Muab tag nrho lwm cov keyfobs tsawg kawg yog 1 ko taw deb ntawm qhov Weblink HUB. Tsis ua raws li yuav ua rau muaj kev puas tsuaj rau lwm cov keyfobs lossis cuam tshuam nrog cov txheej txheem nyeem keyfob.
4. Flash lub module siv lub Weblink HUB. Ua raws li cov lus qhia on-screen kom ua tiav cov txheej txheem nyeem keyfob.
5. Siv OEM yuam sij 1, tig tus yuam sij rau ON txoj haujlwm.
6. Tos, LED yuav tig xim xiav rau 2 vib nas this.
7. Tig tus yuam sij rau OFF txoj haujlwm.
8. Module Programming txheej txheem ua tiav.

LED Programming yuam kev Codes

• 1x RED = Tsis tuaj yeem sib txuas lus nrog RFID lossis cov ntaub ntawv immobilizer.
• 2 x RED = Tsis muaj kev ua si. Tshawb xyuas CAN cable txuas.
• 3 x RED = Ignition tsis kuaj. Txheeb xyuas qhov hluav taws xob thiab CAN cable txuas.
• 4x RED = Yuav tsum tau ignition tso zis diode tsis pom.

FAQ

• Lub hom phiaj ntawm ACC-RFID1 yog dab tsi?
  ACC-RFID1 yuav tsum tau vim tias SUB9 firmware tsis muab cov ntaub ntawv immobilizer, uas yog qhov tsim nyog rau cov chaw taws teeb pib.
• Yog vim li cas Weblink HUB xav tau?
  Cov Webtxuas HUB yog xav tau rau flashing module thiab ua tiav cov txheej txheem nyeem keyfob.
• Kuv yuav ua li cas yog tias LED flashes liab?
  Xa mus rau ntu LED Programming Error Codes los kuaj xyuas qhov teeb meem raws li tus naj npawb ntawm cov teeb liab liab.
• Kuv yuav ua li cas kom ntseeg tau tias kev sib raug zoo ntawm lub sam thiaj?
  Xyuas kom tag nrho cov kev sib txuas 2-pin, ob qho tib si siv thiab tsis siv, txuas nrog lub cev tseem ceeb.

FTI-STK1:

• FT-DAS Yuav tsum tau siv rau kev sib kis.
• Ob leeg Liab & Liab / Dawb yuav tsum tau txuas nrog cov ntawv thov tam sim no.

FTI-STK1 – AL-SUB9 – Type 5 2022-23 Subaru WRX STD KEY MT (CA)

Ignition Switch Assembly

CAIJ NTUJ NO INSTALLATION

1. Swb lub cartridge rau hauv chav tsev. Daim ntawv ceeb toom khawm hauv qab LED.
2. Npaj rau Module Programming Procedure.

MODULE PROGRAMMING PROCEDURE

1. Rau lub installation no, lub Weblink HUB yog yuav tsum tau.
2. Tshem tawm OEM yuam sij 1 ntawm keychain.
3. Muab tag nrho lwm cov keyfobs tsawg kawg yog 1 ko taw deb ntawm qhov Weblink HUB. Tsis ua raws li yuav ua rau muaj kev puas tsuaj rau lwm cov keyfobs lossis cuam tshuam nrog cov txheej txheem nyeem keyfob.
   Flash lub module siv lub Weblink HUB. Ua raws li cov lus qhia ntawm qhov screen kom ua tiav cov txheej txheem nyeem keyfob.
4. CEEB TOOM:
   Tsis txhob nias lub module programming khawm.
   Txuas lub zog ua ntej. Txuas module rau lub tsheb.
5. Siv OEM yuam sij 1, tig tus yuam sij rau ON txoj haujlwm.
6. Tos, LED yuav tig xim xiav rau 2 thib ob.
7. Tig tus yuam sij rau OFF txoj haujlwm.
8. Module Programming txheej txheem ua tiav.

WWW.IDATALINK.COM
Automotive Data Solutions Inc. © 2020

Cov ntaub ntawv / Cov ntaub ntawv

	FIRSTECH FTI-STK1 Wrx Std Key Mt [ua pdf] Daim ntawv qhia kev teeb tsa SUB9, AL-SUB9, FTI-STK1 Wrx Std Key Mt, FTI-STK1, Wrx Std Key Mt, Std Ntsiab Mt, Key Mt, Mt
	FIRSTECH FTI-STK1 Wrx Std Key Mt [ua pdf] Daim ntawv qhia kev teeb tsa DL-SUB9, BLADE-AL-SUB9, ACC-RFID1, FTI-STK1 Wrx Std Key Mt, FTI-STK1, Wrx Std Key Mt, Std Ntsiab Mt, Mt
	FIRSTECH FTI-STK1 Wrx Std Key Mt [ua pdf] Daim ntawv qhia kev teeb tsa Hom 6, Hom 5, FTI-STK1 Wrx Std Ntsiab Mt, FTI-STK1, Wrx Std Ntsiab Mt, Std Ntsiab Mt, Ntsiab Mt, Mt

Cov ntaub ntawv

• Cov neeg siv phau ntawv