DIGITUS-logo

DIGITUS DS-55319 Click and Present Mini Wireless Presentation System

DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-Product

Introduction

Nrog rau Wireless Presentation System, koj tuaj yeem wirelessly xa tawm HDMI video thiab lub teeb liab hauv Full HD nyob deb li ntawm 50 m nrog qhov tsis muaj kev cuam tshuam. view. Operation and installation are super simple. Real Plug & Play – Just plug in and get started. With additional transmitters (DS-55320), the set can be extended to up to 16 transmitter units (total). Switch to the desired transmitter quickly and easily at the press of a button in order to reproduce your content. You can also share content directly from your mobile device (smartphone/tablet) using your device’s OS directly, no additional app is required. The transmitter and receiver can be supplied with power via your device’s HDMI connection (0.5A required), or alternatively (additionally) with the enclosed Micro USB cable via the USB connection of your notebook, PC, etc. Thanks to the compact design of the transmitter and receiver, installation is easy, quick, and can be customized – the perfect solution for meeting and conference rooms.

Main nta

  • Wireless HDMI signal transmission up to 50 m (with an unobstructed view)
  • Supports up to 16x transmitters (sources) + 1x receiver (output device)
  • Extend this set with up to 16 transmitter units (DS-55320)
  • Hloov mus rau qhov xav tau transmitter sai thiab yooj yim ntawm kev nias ntawm lub pob kom rov tsim koj cov ntsiab lus
  • Supports sharing from a mobile device (smartphone/tablet) via the OS of the mobile device, no app is required
  • Supports Windows, iOS, iPad, Android
  • Txhawb kev daws teeb meem txog Full HD (1080p / 60 Hz)
  • Kev ua haujlwm yooj yim thiab tuav ua tsaug rau Plug & Play - Tsuas yog ntsaws thiab pib
  • The transmitter and receiver can be supplied with power via your device’s HDMI connection (> 500 mA required) To have a safe and stable operation, we recommend to use always the Micro USB cable for the power supply of TX and RX

Cov Ntsiab Lus

  • 1 x Transmitter unit
  • 1 x Receiver unit
  • 1x Wifi / Power cable (75 cm) for RX
  • 1x Micro USB cable (80 cm) for TX
  • 2 x HDMI extension cable (15 cm)
  • 1 x QIG

khoom nta

nta Hauj lwm
Ntsaws thiab ua si Tsuas txuas lub transmitter nrog lub PC HDMI chaw nres nkoj thiab txuas lub receiver nrog lub vijtsam, lub transmitter thiab receiver yuav txuas.

txiav

App Dawb The Wireless Presentation System Set doesn’t need any software or app installation, no setup, no IT

pab neeg

Tag nrho hauv ib Txhawb kuj Blu-duab tshav / DVD player, media player thiab lwm yam

ntaus ntawv nrog HDMI jack

Auto Channel xaiv The Wireless Presentation System Set will select the best Wi-Fi channel automatically after power on to ensure streaming

ntseeg nkaws

Ceev ceev nrog 5G AC MIMO Technology The Wireless Presentation System Set comes with the fast 802.11ac MIMO technology which increases Wi-Fi speeds by allowing a pair of wireless devices to simultaneously send or receive

ntau cov ntaub ntawv ntws

1080p60 High Video Zoo The Wireless Presentation System Set supports 1080p resolution,

which means much more clear

pictures, rich in details and

texture compared with 720p.

Kev tiv thaiv siab No worries about the data security, the Wireless Presentation System Set supports AES 128-bit security encryption and WPA2/WPA-PSK/WPA2-PSK

authentication protocol to protect data. HDCP is supported

to protect the content

khoom Specification

feature
Video tswv yim 1920×1080 (1080p60/50/30/25/24,

1080i60/50)

1280×720 (720p60/50)

720 × 576 hli (576p50)

720 × 480 hli (480p60)

Video tso zis Up to 1080p / 60Hz
Suab Lub tso suab, zoo 16bits 48KHz
Wireless Channel IEEE 802.11ac, 5GHz, 2T2R
Latency Nyob ib ncig ntawm 120ms latency
HDMI Version HDMI 1.4 nrog HDCP1.3
authentication

raws tu qauv

WPA2 (WPAS-PSK / WPA2-Enterprise)
Security AES 128 ntsis
Platform txhawb Windows, macOS, iOS, Android
Ze Txog 50 meters hauv txoj kab ntshiab ntawm

pom

transmitter
interface HDMI in jack x 1, Micro USB x 1, button

X XUM

LED Liab thiab Xiav
Hloov Khawm 1 x
hwj chim Mov DC5V / 0.5A
Hwj chim Siab Txog 2,5 W
dimension 83 x 32 x 13mm
Nyhav 27.1 g
receiver
interface HDMI out jack x 1, Micro USB x 1,

nub x 1

LED Liab thiab Xiav
hwj chim Mov DC5V / 0.5A
Hwj chim Siab Txog 2.5W
dimension 83 x 32 x 13mm
Nyhav 27.1 g
kub khwv
Kev khiav hauj lwm 0 ° C txog + 40 ° C (+ 32 ° F txog + 104 ° F)
cia -10 ° C txog +60 ° C ( +14 ° F txog +140 ° F)
Vaum
Kev khiav hauj lwm 10% mus rau 80% tus txheeb ze cov av noo

Nyobview

Cov Khoom Hloov Mus Los DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-1

1. HDMI hauv Connect source devices, like with a computer or other devices with HDMI, the HDMI in also supports 5V power if the source devices

has HDMI with a 5V output

2. Khawm Luv nias: pib nrum

Long press: long press up to 10

seconds for factory reset

2.Qhov LED Mus tso saib txawv pej thuam
3. Micro USB Rau lub zog

hais: if the source device has a HDMI with 5V power output, then there is no need to connect an USB cable for power.

LED qhov taw qhia ntawm lub

Cov Khoom Hloov Mus Los

Hauj lwm
Static liab Transmitter Unit system is

booting on

Cais liab Transmitter Unit is searching for

Lub Chaw Txais Cov txais

Flash xiav Tos rau kev txuas
Static xiav Connected and started to

tam sim no

Ntshav Tsis muaj HDMI hauv

Lub Chaw Txais Cov txaisDIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-2

1. HDMI out Connect with monitor or

projector

2. Khawm: Press 10 seconds for factory

pib dua

2.Qhov LED To display different status
3. Micro USB Rau lub zog
LED qhov taw qhia ntawm lub

Lub Chaw Txais Cov txais

Hauj lwm
Flash xiav Tos rau kev txuas
Static xiav Connected and started to

tam sim no

installation

Txais Kev Txhim Kho
  1. Connect with TV or projector
    • Connect the Receiver HDMI Unit with the big screen TV or projectors HDMI jack
    • Connect the Micro USB port of the Receiver to the USB port of the TV through the Wifi USB connection/power supply cable. DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-3
  2. Txuas rau Is Taws Nem 
    • Connect the Receiver SSID with your smart devices, the SSID and password are shown on the left upper corner of the screen DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-4
      DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-5
    • Open the browser with your phone, and input the IP address which shows on the left upper corner of the screen to enter to the Receivers management platform
      hais: when connect to the router, the IP address will be updated accordingly DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-6
    • Select the network and connect in the management platform, the Receiver Unit will link to the network and show the network SSID on the middle of the screen (to get a better performance, we recommend connecting with 5G router) The platform will list all your wireless router SSID, select the SSID from the wireless router and enter the password. The Receiver Unit will link to the network and show the network SSID on the middle of the receiver screen (to get a better performance, we recommend connecting with 5G router) DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-7
  3. lus 
    • User can change language in the management page DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-8
  4. Txoj hauj lwm npo 
    • If the Receiver HDMI out size is not compatible with the display, user can use Screen Position to adjust the zoom in and zoom out of the screen DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-9
  5. Streaming mode 
    • You can select to use streaming or mirror mode DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-10

Transmitter Installation

  1. Connect the Transmitters HDMI Unit to PC HDMI port Remark: If the source device HDMI has a 5V power output, then there is no need to connect a USB cable for power. If not, please connect the Transmitter with PC by USB cable for power.
  2. The LED indicator of the Transmitter will turn red when it’s booting up.
  3. Qhov taw qhia LED yuav dhau los ua xiav thiab flashing thaum nws npaj txhij rau kwj
  4. Nias lub pob kom pib casting, qhov taw qhia LED yuav dhau los ua xiav tas li

Pairing Transmitter thiab Cov Neeg Txais Txais

A set of the Wireless HDMI Extender Set includes one receiver and one transmitter, which are paired before shipment. Normally you don’t need to pair them again. However, if you buy an additional transmitter, you need to follow the instruction below to pair the new transmitter with the receiver.

  1. Fais fab ntawm receiver thiab txuas nrog zaub
  2. Fais fab ntawm lub transmitter kom txog rau thaum LED tig mus rau flash liab, ces nias lub pob mus txog 5 vib nas this kom txog thaum lub LED ua sai flashing liab, qhov no txhais tau hais tias lub transmitter unit nyob rau hauv lub Hoobkas pib dua hom.
  3. Wait around 15 seconds, the button light of the Transmitter will turn to constant blue from the red light, and the pair successful message will be displayed on the Receiver Unit screen

streaming

Tshaj tawm los ntawm Transmitter

  1. Txuas lub Transmitter HDMI Unit rau PC HDMI chaw nres nkoj
    hais: Yog tias cov khoom siv HDMI nrog 5V lub zog tso tawm, ces tsis tas yuav txuas USB cable rau lub zog, yog tias tsis yog, thov txuas lub Transmitter Unit nrog PC los ntawm USB cable rau lub zog. Txhawm rau kom muaj kev nyab xeeb thiab ruaj khov, peb xav kom siv ib txwm siv Micro USB cable rau lub zog ntawm TX thiab RX
  2. Qhov taw qhia LED ntawm Transmitter yuav tig liab thaum nws booting
  3. Qhov taw qhia LED yuav dhau los ua xiav thiab flashing thaum nws npaj txhij rau kwj
  4. Nias lub pob kom pib casting, qhov taw qhia LED yuav dhau los ua xiav tas li

Streaming from smart devices (smartphone/tablet)

hais: If a HDMI Transmitter (TX) is connected with the HDMI Receiver (RX), please unpair/disconnect the TX and the RX by press the button on TX first, start screen will be shown. Then you can connect a mobile device. Priority is HDMI Transmitter (TX) before mobile device (smartphone/tablet).  When a mobile device is connected and you want to switch to HDMI transmitter, just press the button on TX to share. You don’t need to disconnect mobile device first.
IOS Devices: 

  • Search RX (Receiver) SSID and connect in Wifi settings. (SSID: DIGITUS…, Password: 12345678), the is SSID shown on the left upper corner of the RX start screen
  • Use the screen mirroring function of the smartphone
  • Choose RX (Receiver) DIGITUS-… to start sharingDIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-11

Hauv pab kiag li lawm:  

  • Make sure the Wi-Fi of your android device is activated/available
  • Go to the Mirror/Share/Cast function of the smartphone
  • Choose RX (Receiver) DIGITUS-… to start sharing DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-12

hais: there are different names on different brands of phones or tablets: WIFI Display, WLAN Display, Wireless Display, Allshare Display, Allshare Cast, Wireless Display, MirriorShare, etc.

Zaus Zaus & Tshaj Tawm Ntau Lub Hwj Chim

  • WiFi Standard: 802.11b/g/n/ac 5G WiFi
  • Channel: 36, 40
  • Core Frequency: 5180, 5200
  • Ntau yam: 5170 ~5 210MHz
  • Bandwidth: 20 / 40MHz
  • Cov khoom hloov hluav taws xob: 13 dBm max
  • SWV version: RX: 2.69, TX: 2.3.9
  • HW version:
    • TX: S100TX-LC01-01
    • RX: S100RX-LC01-01

Cov lus qhia kev nyab xeeb tseem ceeb

Thov nyeem cov lus qhia kev nyab xeeb hauv qab no ua tib zoo ua ntej teeb tsa thiab ua haujlwm:

  1. Saib xyuas txhua qhov lus ceeb toom thiab cov lus qhia hais txog lub cuab yeej no
  2. Tsis txhob tso lub cuab yeej los nag, dej noo, vapors lossis kua
  3. Tsis txhob ntxig ib yam khoom rau hauv lub cuab yeej
  4. Tsis txhob sim kho lub tsev koj tus kheej lossis qhib lub txee. Kev pheej hmoo ntawm hluav taws xob poob siab!
  5. Xyuas kom muaj qhov tso pa tawm kom txaus kom tiv thaiv kev puas tsuaj vim qhov cua sov
  6. Tua lub hwj chim thiab xyuas kom ib puag ncig nyab xeeb ua ntej teeb tsa
  7. In the event of thunderstorms, there is a risk of lightning strikes and damage to connected electrical equipment due to overvoltage
  8. Tsis txhob teeb tsa lub cuab yeej no thaum muaj cua daj cua dub
  9. Txuas lub cuab yeej los ntawm cov khoom siv hluav taws xob txuas thaum lub sij hawm cua daj cua dub
  10. Siv lub cuab yeej sab hauv tsev xwb
  11. Xa cov cuab yeej mus rau koj tus neeg muag khoom thaum kho
  12. Dust, moisture, vapors, and strong cleaning agents or solvents can damage the device
  13. Txuas lub cuab yeej los ntawm lub hwj chim thiab cov khoom siv txuas ua ntej ntxuav
  14. Ntxuav lub cuab yeej nrog daim ntaub tsis muaj lint

Disclaimer

Cov ntsiab lus HDMI thiab HDMI High-Definition Multimedia interface, thiab HDMI Logo yog cov cim lag luam lossis cov cim kev lag luam ntawm HDMI Licensing LLC hauv Tebchaws Meskas thiab lwm lub tebchaws. Ntawm no ASSMANN Electronic GmbH tshaj tawm tias Kev Tshaj Tawm Txog Kev Ua Raws Cai yog ib feem ntawm cov ntsiab lus xa khoom. Yog tias Daim Ntawv Tshaj Tawm Txog Kev Ua Raws Li Tsis Muaj, koj tuaj yeem thov nws los ntawm kev tshaj tawm hauv qab no-hais chaw tsim khoom lag luam.  www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Lub Tebchaws Yelemees

Cov ntaub ntawv / Cov ntaub ntawv

DIGITUS DS-55319 Click and Present Mini Wireless Presentation System [pdf] Tus neeg siv phau ntawv
DS-55319, Click and Present Mini Wireless Presentation System, DS-55319 Click and Present Mini Wireless Presentation System, Mini Wireless Presentation System, Wireless Presentation System, Presentation System

Cia ib saib

Koj email chaw nyob yuav tsis tsum luam tawm.