Coral Vision R9 Carplay Dashcam Installation Guide
Cov lus qhia
Thank you for purchasing the CarPlay Dashcam. Before starting, please read this manual carefully to enjoy the best performance and a longer product lifetime.
Coral Vision strives to improve the quality of this product and provide a complete warranty. This product does not affect the original equipment of the car, it is a beautiful, convenient and durable multi-functional product.
Designed with the most advanced and innovative technology, this CarPlay dash cam integrates with Apple CarPlay, Android Auto, and dashcam to provide you with safe, convenient, smart, and effortless driving.
In order to continuously improve the product, Coral Vision reserves the right to update or modify the information contained in this manual.
INSERT THE TF CARD BEFORE INSTALLATION.
Fix the main unit on the rearview mirror with a rubber band, and plug the power cord into the Type-C port an the rear lens cable into the AV port.
Power and GPS (optional and Taiwan only) wiring diagram
Rear lens wiring diagram
Plug the power cord into the cigarette lighter, wait for about 15 seconds to complete the startup, and then start to operate.
Recommends you to wire and install by a professional if you are not familiar with car installation.
1. Tsos
- TYPE-C chaw nres nkoj
- Rear lens port
- TF qhov
- GPS chaw nres nkoj
- Screen 6.Power
- MIC
- Nkag
- Pem hauv ntej lens
- hais lus
- Rov qhib qhov
- Pluaj nuv
2. Ua haujlwm yooj yim
2.1 Power:
After power plug in, the machine will turn on automatically. Press the power button to switch the home screen, clock, and off the screen. Tap on the screen to light the screen if the screen is off.
2.2 Touch:
The main operations are performed on the screen through touch operations.
3. Lub tsev tshuaj ntsuam
- tsheb ua si
- Android pib
- FM
- pab
- PlayBack
- chaw
- Sau cov xwm txheej
- TF card status
- Puv npo
4. nta
4.1. CarPlay
Connect your phone and the machine (ID is CORAL_R9_xxxxxx) via Bluetooth pairing, and follow the instructions on the phone screen to connect. Please agree to turn on WiFi to
perform CarPlay if first connecting. After completion, it will automatically connect and shows the CarPlay menu on the left screen of the machine. Then you can operate
CarPlay including Siri, iTunes music player, Apple map, SMS service, etc. Manually turn off the Bluetooth and
WiFi on the phone, or move away from the machine and it will automatically disconnect.
The machine will automatically connect and launch the
CarPlay interface after the machine starts up if it has ever connected.
4.2. Android Auto
Connect your Android phone
(Android 11 or later) and the machine (ID is CORAL_R9_xxxxxx) via Bluetooth pairing, and follow the instructions on the phone screen to connect. Please agree to turn on WiFi to perform Android Auto if first connecting. After completion, it will automatically connect and shows the Android Auto on the left screen of the machine. Then you can operate Android Auto including voice control, Spotify, Google map, SMS service, etc. Manually turn off the Bluetooth and WiFi on the phone, or move away from the machine and it will automatically disconnect.
The machine will automatically connect and launch the Android Auto interface after the machine starts up if it has ever connected.
4.3. FWM
Tap the icon to enter the following screen. After the channel setting is completed, tap Home to back the home screen, and the channel and on/off settings will be automatically saved.
| 1 | Freq. Khwv | Divided by countries |
| 2 | Rau / Tawm | Transmitter on/ off |
| 3 | Freq. fine tune | Up/ down 0.1MHz per step |
| 4 | Tsev | Back to home screen |
| 5 | Freq. tune | Up/down 1MHz per step |
| 6 | Band pre-setting | Tsis kho |
4 . Help
Built in simple installation, operation, and exception instructions.
- installation
- Kev khiav hauj lwm
- Tshaj tawm
4.5. Ua si rov qab
Playback the videos and photos on the TF card.
Front Normal
- Rear Normal
- Front_Photo
- Rear_Photo
- Front Emergency
- Rear Emergency
4.6. Chaw
- Hnub / Lub Sij Hawm
- Microphone
- volume
- Screen saver
- Auot brightnedd
- G-sensor
- Reverse line
- kev daws teeb meem
- Loop txias
- lus
- timezone
- Zaus
- hom
- Rov qab qhib lub chaw
- Video stamp
- Hais txog
1. Record status 2. SD card status 3. Full screen
Swipe left or right on the Dashcam side to switch front/ rear camera videos.
Tap on Dashcam side, there are brightness/ volume control icons pup out.
Record status: Red (working) / White (standby)
Tap on “Full screen” to enter the dashcam full screen.
There are voice record, video range, and capture a photo functions on the dashcam full screen.
5. Specification
| saib | 11 inches (1920 x 462) |
| Pem hauv ntej lens | Sony Sensor 4K/ 2K, 160° |
| rear lens | FHD 1080P, 140° |
| Yees duab hom | MP4 |
| lus | Suav, Lus Askiv |
| Video coding | H.265 |
| Loop ntaub ntawv | Transport Stream by second |
| Machine on/off | Turns on when the vehicle starts, turns off when the vehicle shuts down |
| Photo
kev daws teeb meem |
5M pixel ib |
| Diam duab hom | JPEG |
| Nco daim npav | Micro SD (up to 128GB) C10 |
| Microphone | embedded |
| suab | Embedded speaker/ FM transmitter |
| AC zaus | 50Hz/ 60Hz |
| Lub zog fais fab | TYPE-C 5V/ 3A |
| Roj teeb | Khawm ntawm tes |
6. FCC WARNING
Cov cuab yeej siv no ua raws li ntu 15 ntawm FCC Cov Cai. Kev ua haujlwm yog raug rau ob qho xwm txheej nram qab no: (1) cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam tsis zoo, thiab (2) cov cuab yeej no yuav tsum lees txais txhua yam cuam tshuam uas tau txais, suav nrog kev cuam tshuam uas tuaj yeem ua rau tsis xav ua haujlwm.
Ib qho kev hloov pauv lossis kev hloov pauv uas tsis tau pom zoo los ntawm tog neeg ua haujlwm rau kev ua raws li yuav ua rau tus neeg siv muaj cai los ua haujlwm cov cuab yeej.
NCO TSEG: Cov khoom siv no tau kuaj xyuas thiab pom tau tias ua raws li qhov kev txwv rau Ib Tug Class B digital device, ua raws li Ntu 15 ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev ua kom muaj kev cuam tshuam tsis zoo hauv kev teeb tsa hauv chaw nyob. Cov khoom siv no tsim tawm, siv thiab tuaj yeem tshaj tawm cov xov tooj cua hloov lub zog thiab, yog tias tsis ntsia thiab siv ua raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam tsis zoo rau xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb.
Yog tias cov khoom siv no ua rau muaj kev cuam tshuam tsis zoo rau xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm tig cov cuab yeej tawm, thiab cov neeg siv raug txhawb kom sim kho kev cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:
- Kav thaib lossis rhais chaw lub kav hlau txais xov.
- Ua kom sib txawv ntawm cov cuab yeej thiab cov txais khoom.
- Txuas cov khoom siv rau hauv qhov hluav taws xob ntawm qhov hluav taws xob tsis zoo ib yam los ntawm kev sib txuas uas tus tau txais.
- Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV kws paub txog kev pab. Txhawm rau kom ua raws li FCC's RF Exposure cov lus qhia, Cov cuab yeej no yuav tsum tau nruab thiab ua haujlwm nrog qhov deb tsawg kawg nkaus ntawm 20cm lub tshuab hluav taws xob koj lub cev: Siv cov kav hlau txais xov xa khoom nkaus xwb.
Nyeem Ntau Txog Phau Ntawv No & Rub Ntawv PDF:
Cov ntaub ntawv / Cov ntaub ntawv
 |
Coral Vision R9 Carplay Dashcam [pdf] Installation Guide R9, 2AV8I-R9, 2AV8IR9, R9 Carplay Dashcam, Carplay Dashcam, Dashcam |
