INDUCTIVE LOOP DETECTOR
FLUX SA
POCKET INSTALLATION MANUAL
Centurion Systems (Pty) Ltd 
Taw qhia
Cov FLUX SA yog ib qho channel stand-alone inductive voj ntes tsim los rau kev siv tsheb nkag.
Lub ntes yog teb, rhiab heev, thiab siv sophisticated software algorithms uas yoog kom tsis txhob muaj qhov yuam kev tshwm sim vim kev hloov ib puag ncig. Yooj yim rau siv dipswitches, nrog rau kev pom thiab hnov lus tawm tswv yim ntawm lub voj voog ua haujlwm, xyuas kom muaj kev cuam tshuam tsis muaj teeb meem.
Cov kev siv ib txwm muaj xws li lub voj voog dawb-tawm, voj voog kev nyab xeeb, kaw lub voj voog rau cov teeb meem kev tsheb, arming loops rau cov khoom siv tswj kev nkag, thiab daim ntawv thov kev paub txog tsheb dav dav.
TSEEM CEEB Cov lus qhia kev nyab xeeb
- Txhua qhov kev teeb tsa, kho, thiab kev pabcuam ua haujlwm rau cov khoom no yuav tsum tau ua los ntawm tus neeg tsim nyog tsim nyog.
- Tsis txhob nyob rau hauv txhua txoj kev hloov cov Cheebtsam ntawm lub system.
- Tsis txhob nruab cov khoom no ze rau cov khoom siv hluav taws xob (xws li DOSS sensor hauv CentSyS lub rooj vag neeg tsav tsheb vaj tse).
- Tsis txhob nruab cov khoom siv hauv qhov chaw tawg: Qhov muaj cov pa taws los yog cov pa taws ua rau muaj kev phom sij loj rau kev nyab xeeb.
- Ua ntej sim ua haujlwm ntawm qhov system, txiav hluav taws xob thiab txiav cov roj teeb.
- Tsis txhob tso cov khoom ntim khoom (yas, polystyrene, thiab lwm yam) kom ncav cuag cov menyuam yaus, vim tias cov ntaub ntawv no yog qhov muaj kev phom sij.
- Pov tseg tag nrho cov khoom pov tseg xws li cov khoom ntim, thiab lwm yam, raws li cov cai hauv zos.
- Scentsy tsis lees txais ib qho kev lav phib xej los ntawm kev siv cov khoom siv tsis raug, lossis siv lwm yam tshaj li qhov uas lub kaw lus tau npaj.
- Cov khoom no tau tsim thiab ua nruj me ntsis rau kev siv uas tau teev tseg hauv cov ntaub ntawv no. Lwm yam kev siv, tsis tau qhia meej ntawm no, tuaj yeem cuam tshuam kev pabcuam lub neej / kev ua haujlwm ntawm cov khoom thiab / lossis yog qhov txaus ntshai.
- Txhua yam uas tsis tau hais meej meej hauv cov lus qhia no tsis tso cai.
Kev txheeb xyuas cov khoom
- Cov khoom sib txuas
- FLUX SA Housing
- Bootloader header
- Pib dua khawm
- Diagnostic LEDs
- Dipswitches
- Dipswitch cover
Technical Specifications
| Muab voltage | 10V-40V DC 7V-28V AC |
| Standby tam sim no | 50 mA |
| Output relay ntsuam xyuas | 1A @ 125V AC |
| Kev kuaj xyuas lub sijhawm | 4ms @ 100kHz voj zaus |
| 10ms @ 40kHz voj zaus | |
| IndicatorsVisual
Mloog tau |
LED ntsuas qhia lub zog, Loop Fault, Loop nrhiav kom tau qib (5 LEDs), Ntes
Buzzer nrog qhov qhia txog kev ntsuas lub voj voog thiab lub voj tsis raug |
| Ntes tuning ntau | 15-1500 µH |
| Surge tiv thaiv | Kev rho tawm transformer nrog 10kA tiv thaiv xob laim |
| Cov khoom sib txuas | Tshem tau cov connectors kom yooj yim txij nkawm |
| Qhov ntev | 105mm (ntev) X 60mm (dav) X 26mm (qhov siab) |
| Pawg | 85g ua |
| Qib kev tiv thaiv | IP50 |
Standard Features ntawm lub Detector
| Pib dua khawm | Nias lub pob pib dua ua kom lub tshuab ntes tau manually rov pib dua txhua lub sijhawm. Qhov no ua rau lub detector rov kho qhov ntsuas lub voj thiab npaj txhij rau kev kuaj xyuas lub tsheb. Tsis tas li ntawd, 0.5s tso zis mem tes yuav raug generated. |
Dipswitches
| Khiav Hloov | Yog tias qhov hloov pauv no yog ON, lub ntsuas ntsuas nyob hauv Khiav hom, thiab ua haujlwm ib txwm. Yog OFF, lub ntes nres, thiab cov zis relay default mus rau lub xeev kuaj pom. Qhov no yog qhov muaj txiaj ntsig zoo thaum ua haujlwm ntawm txoj kev tsheb ciav hlau, vim nws yuav tiv thaiv kom tsis txhob muaj kev cuam tshuam. | ||
| Kev Xaiv Sijhawm Hloov |
Qhov zaus ntawm lub voj yog txiav txim siab los ntawm qhov inductance ntawm lub voj thiab qhov zaus hloov chaw. Yog tias qhov hloov pauv zaus nyob rau, qhov zaus raug txo los ntawm kwv yees li 25%. Tej zaum nws yuav tsim nyog los hloov qhov zaus los tiv thaiv crosstalk ntawm cov loops uas nyob ib sab. | ||
| Buzzer Enable Hloov | Tswj lub suab ntsuas - ib qho cuab yeej kuaj xyuas muaj txiaj ntsig thaum teeb tsa lub voj | ||
| Pulse/Presence Switch | Configures cov zis raws li lub pulsed los yog muaj | ||
| Ntes/Undetect Switch | Yog tias cov zis hluav taws xob raug xaiv, qhov hloov pauv no teeb tsa cov zis hluav taws xob kom tsim tawm thaum lub tsheb raug kuaj pom ( nkag mus rau hauv lub voj), lossis tsis pom (tawm lub voj voog). | ||
| Lim Hloov | Qhov kev hloov no ua rau ncua sij hawm ntawm ob lub vib nas this ntawm kev tshawb pom lub tsheb thiab hloov ntawm cov zis. Qhov ncua sij hawm no feem ntau yog siv los tiv thaiv kev tshawb pom tsis tseeb ntawm cov khoom txav ceev. | ||
| Automatic Sensitivity Boost (ASB) Hloov |
Qhov kev xaiv no ua rau kom qhov rhiab heev ntawm lub ntes tom qab qhov pib pom ntawm lub tsheb. Qhov no yog qhov muaj txiaj ntsig zoo txhawm rau txheeb xyuas cov tsheb thiab cov tsheb sib xyaw ua ke. rhiab heev rov qab mus rau tus nqi xaiv thaum lub tsheb tsis raug kuaj pom. | ||
| Permanent Presence Switch | Yog tias xaiv ua ke nrog Presence Output, cov zis yuav nyob twj ywm yog tias lub tsheb tseem nyob ntawm lub voj. Qhov txaus ntshai ntawm kev siv qhov teeb tsa no yog qhov hloov pauv ntawm ib puag ncig (example cov kev taw qhia ntawm cov hlau mus rau hauv ib puag ncig ntawm lub voj) yuav tsis cia li tig tawm yam tsis nias lub pob pib dua. Yog tias tsis xaiv, lub voj yuav cia li qhib qhov chaw mus tas li kuaj pom tom qab tsib feeb. |
||
| Adjustable Loop Sensitivity Switches | Plaub qhov teeb tsa rhiab heev yog muaj | ||
|
rhiab heev |
SENS 1 |
SENS 2 |
|
| Siab |
OFF |
OFF | |
| Nruab nrab-siab |
OFF |
ON |
|
| Nruab nrab-tsawg |
ON |
OFF |
|
|
Tsawg |
ON |
ON |
|
LED ntsuas
| Lub zog taw qhia LED | Lub LED liab no yog nyob rau thaum lub hwj chim tam sim no, thiab tus maub los ua haujlwm. |
| Loop Fault Indicator LED | Qhov LED liab no yog illuminated thaum muaj lub voj tsis raug. Yog hais tias lub voj yog qhib Circuit Court, Fault LED yuav flash tsis tu ncua. Yog hais tias lub voj yog luv luv, nws yuav nyob twj ywm. |
| Kev Ntsuas Qib Ntsuas LEDs | Cov tsib LEDs liab no muab qhov pom kev pom ntawm Kev Tshawb Fawb Qib. Thaum tag nrho tsib LEDs nyob rau, qhov kev tshawb pom qhov pib yuav luag txog. Qhov no yog qhov muaj txiaj ntsig zoo los txiav txim siab yog tias lub voj yuav ua tau zoo. Tsis muaj tsheb nyob ib puag ncig, tag nrho cov LEDs yuav tsum tawm. |
| Tshawb xyuas qhov taw qhia LED | Qhov taw qhia ntsuab LED no yog illuminated thaum muaj tsheb kuaj pom. Qhov LED no tseem tuaj yeem siv los txiav txim siab lub voj voog zaus. Rov pib dua lossis ua kom muaj zog, suav cov sij hawm kuaj pom LED flashes. Muab tus lej no los ntawm 10KHz. Rau example: Yog hais tias lub LED flashes yim zaus, ces lub voj zaus yog kwv yees li 80KHz |
Relay muaj nuj nqi
| Lub tsheb kuaj pom | Tsis pom lub tsheb | Loop faulty | Fais fab tuag | |
| N / o | Kaw | Qhib | Kaw | Kaw |
| N/C | Qhib | Kaw | Qhib | Qhib |
Cov lus qhia rau kev ua tiav Loop Installation
1. Lub FLUX SA yuav tsum tau muab tso rau hauv qhov chaw tsis muaj huab cua, xws li sab hauv ntawm tus neeg tsav tsheb lub rooj vag, kom ze rau lub voj voog li sai tau.
2. Lub voj thiab feeder yuav tsum tau tsim los ntawm XLPE (cross-linked polyethylene) insulated multi-stranded tooj liab hlau nrog qhov tsawg kawg nkaus cross-sectional cheeb tsam ntawm 1.5mm. Lub feeder yuav tsum tau twisted ntawm tus nqi tsawg kawg yog 20 lem ib meter los txhim kho kev ntseeg tau (Nco ntsoov tias twisting lub feeder yuav luv nws ntev, yog li xyuas kom meej ib tug ntev txaus feeder hlau siv). Cov khoom noj uas tuaj yeem khaws cov suab nrov hluav taws xob yuav tsum siv cov kab ntsuas kab, nrog lub vijtsam earthed ntawm lub ntes.
3. Cov pob qij txha hauv cov hlau tsis raug pom zoo, tab sis qhov twg yuav tsum tau soldered thiab ua kom tsis muaj dej.
Faulty pob qij txha yuav ua rau kev ua haujlwm tsis muaj kev ntseeg siab.
4. Lub voj yuav tsum yog square lossis duab plaub nyob rau hauv cov duab nrog qhov tsawg kawg nkaus ntawm 1m ntawm qhov sib txawv.
5. Ob mus rau rau lem ntawm cov hlau feem ntau yog siv nyob rau hauv lub voj - saib cov lus hauv qab no.
| Lub voj voog perimeter (meter) | Tus naj npawb ntawm lem |
| 3–4 : kuv 4–6 : kuv 6–10 : kuv 10–20 : kuv > 20 |
6 5 4 3 2 |
6. Thaum ob lub voj voog tau muab tso rau hauv qhov ze ze rau ib leeg, nws raug nquahu kom siv cov lej sib txawv ntawm txhua lub voj kom tiv thaiv kev sib tham.
7. Kev sib tham sib tham piav txog kev cuam tshuam ntawm ob lub voj voog uas nyob ib sab thiab tuaj yeem ua rau muaj teeb meem kev ntseeg siab.
Yuav kom txo qis kev sib tham, cov voj uas nyob ib sab yuav tsum sib nrug tsawg kawg yog ob metres, thiab ntawm qhov sib txawv zaus
8. Daim ntawv txhim khu kev qha tshaj plaws ntawm lub voj yog ua thiab muab ntim rau hauv cov kav dej. Qhov no tiv thaiv dej ingress thiab txo qhov cuam tshuam ntawm kev co.
9. Qhov twg lub voj voog ua ntej tsis tuaj yeem siv tau, cov qhov yuav tsum tau txiav rau hauv txoj kev uas siv cov cuab yeej siv masonry. A 45 txiav yuav tsum tau ua hla lub kaum sab xis kom tiv thaiv kev puas tsuaj rau cov hlau ntawm cov ces kaum. Lub qhov yuav tsum yog li 4 hli dav thiab 30mm mus rau 50mm tob. Nco ntsoov txuas lub qhov los ntawm ib qho ntawm cov ces kaum mus rau txoj kev kom haum rau lub feeder. Tom qab lub voj voog thiab cov xaim feeder tau muab tso rau hauv qhov, lub qhov yuav tsum tau ntim nrog epoxy compound lossis bitumen muab tub lim.
Mounting cov lus qhia
Lub vaj tsev ntawm FLUX SA tsis yog huab cua tsis zoo, thiab nws yuav tsum tsis txhob ntsia sab nraud.
Theej mount FLUX SA hauv tus neeg teb xov tooj lossis lub thawv tswj kom haum. Mounting cov ntsiab lus tau muab tso rau hauv qhov tsim ntawm lub hau ntawm FLUX SA los pab koj kom tau txais txoj haujlwm zoo.
Kev teeb tsa hluav taws xob
1. Xyuas kom meej tias tag nrho cov voltage systems (tsawg dua 42.4V) yog qhov tsim nyog tiv thaiv kev puas tsuaj, los ntawm kev tshem tawm txhua qhov chaw ntawm lub zog xws li chargers thiab roj teeb ua ntej ua haujlwm.
2. Txhua txoj haujlwm hluav taws xob yuav tsum tau ua raws li qhov yuav tsum tau ua ntawm txhua txoj cai siv hluav taws xob hauv zos.(Nws pom zoo kom tus neeg ua haujlwm hluav taws xob muaj ntawv tso cai ua haujlwm li no.)
8A. D5-Evo Free-out Loop
8B. D5-Evo Kaw Safety Loop
8 C. Daim duab kab sib txuas Generic
Commissioning qhov System
- Nrog lub voj txuas, siv lub zog rau FLUX SA.
- Lub zog hluav taws xob liab yuav teeb, thiab ntsuab Nthuav LED yuav nyem kom txog thaum lub voj voog ruaj khov, thiab tom qab ntawd tua.
- Yog tias lub buzzer tau qhib, nws yuav suab tsis tu ncua thaum lub sijhawm no.
- Thaum lub voj tau ruaj khov, tsuas yog lub zog hluav taws xob liab yuav tsum nyob rau.
- Nqa ib qho khoom siv hlau los ntawm lub voj, thiab Sense theem LEDs yuav pib teeb, qhia txog qhov kev tshawb pom ntau ntawm lub voj.
- Thaum tag nrho tsib lub teeb tau teeb, lub tsev yuav nkag mus ntes, nrog rau ntsuab Nthuav LED teeb.
- Yog tias lub buzzer tau qhib, lub suab sib txawv yuav qhia txog qib kev nkag siab thiab hloov mus rau lub suab nrov tas li thaum lub tsev tau kuaj pom.
- Configure qhov xav tau kev teeb tsa ua haujlwm siv Dipswitches (qhib qhov nkag nkag mus rau Dipswitches).
- Kuaj FLUX SA siv cov khoom siv hlau, lossis lub tsheb.
Kev kuaj mob
|
Cov tsos mob |
Ua tau |
Kev daws |
| Lub zog LED tsis nyob rau | Tsis muaj zog voltage ntawm input. | Xyuas kom paub tseeb tias cov khoom siv hluav taws xob raug xaim mus rau lub tshuab ntes. |
| Qhov kev nkag siab Level LEDs flash yuam kev |
Tej zaum yuav muaj kev sib txuas tsis zoo nyob rau hauv lub voj lossis voj feeder. | Xyuas tag nrho cov kab. Tighten ntsia hlau terminals. Tshawb xyuas cov kab tawg. |
| Lub detector tej zaum yuav ntsib crosstalk nrog lub voj ntawm ib tug uas nyob ib sab detector. | Sim hloov zaus siv qhov hloov zaus. Muab lub ntsuas ntsuas nrog lub voj loj dua mus rau qhov tsis tshua muaj zaus thiab lub ntsuas ntsuas nrog lub voj me me mus rau qhov siab. | |
| Lub detector randomly ntes, txawm tias tsis muaj tsheb tam sim no |
Faulty loop los yog voj feeder thaiv. | Txheeb xyuas cov kab hluav taws xob. Tighten ntsia hlau terminals. Tshawb xyuas cov hlua khi los yog khoov. Puas yog lub feeder hlau twisted? |
| Kev txav ntawm lub voj hauv av. | Tshawb xyuas cov kab nrib pleb hauv txoj kev ze ntawm lub voj voog. | |
| Lub Loop Fault LED yog flashing, thiab lub suab nrov tau hnov - ob lub suab luv, ib lub suab ntev | Lub voj inductance loj dhau, lossis lub voj yog qhib Circuit Court. | Txheeb xyuas tias muaj hluav taws xob txuas ntxiv ntawm lub voj. Yog hais tias lub voj inductance loj dhau lawm ces sim txo tus naj npawb ntawm lem. |
| Lub Loop Fault LED yog qhov ci ntsa iab mus tas li, thiab lub suab nrov tau hnov - ib lub suab luv, ib lub suab ntev | Lub voj inductance me dhau, lossis lub voj voog luv luv. | Xyuas kom tseeb tias tsis muaj luv luv Circuit Court ntawm lub voj feeder thaiv lossis lub voj. Yog hais tias tsis muaj luv luv Circuit Court, lub inductance me dhau lawm thiab ntau lem ntawm hlau yuav tsum tau ntxiv rau lub voj. |
facebook.com/CenturionSystems
YouTube.com/CenturionSystems
@askCentSys
Sau npe rau tsab ntawv xov xwm: www.CentSys.com.au/Subscribe
www.CentSys.com.au
Hu rau Centurion Systems (Pty) Ltd South Africa
Chaw Haujlwm: +27 11 699 2400
Hu rau Technical Support: +27 11 699 2481
ntawm 07:00 txog 18:00 (GMT+2)
www.centsys.com
E&OE Centurion Systems (Pty) Ltd reserves
txoj cai hloov ib yam khoom yam tsis tau ceeb toom ua ntej
Tag nrho cov khoom lag luam thiab cov npe khoom lag luam hauv cov ntaub ntawv no uas muaj nrog ® lub cim yog cov cim lag luam hauv South Africa thiab / lossis
Lwm lub tebchaws, hauv kev pom zoo ntawm Centurion Systems (Pty) Ltd, South Africa.
Lub CENTURION thiab CENTSYS logos, tag nrho cov khoom thiab cov npe khoom hauv Cov ntaub ntawv no nrog rau lub cim TM yog cov cim lag luam
ntawm Centurion Systems (Pty) Ltd, hauv South Africa thiab lwm thaj chaw; txhua txoj cai tau tseg.
Peb caw koj tiv tauj peb kom paub meej ntxiv.
DOC: 1184.D.01.0001_05032021
SAP: DOC 1184D01
Cov ntaub ntawv / Cov ntaub ntawv
 |
CENTURION FLUX SA Inductive Loop Detector [ua pdf] Phau ntawv qhia CENTURION, FLUX SA, Inductive, Loop, Ntes |
