Party Pal 60

boAt Party Pal 60

cov neeg siv los ntawm txhais tes

Specifications

Specifications

Nyees khawm thiab tso cai

Nyees khawm thiab tso cai

Cov Lus Qhia Txog Kev Txawj Ntse

Them

Kuv tuaj yeem them cov neeg hais lus li cas?

  1. Please use the DC5V/1A or 2A current safety standards charger or above to meet safety standards charger. Insert the Micro USB cable into the speaker to begin charging.
  2. When the charging symbol flashes (6.0V – 6.6V), it needs to be charged immediately. The speaker will automatically shut down when the battery is below the protective voltage (6.0V).
  3. It will display “OFF” and then display “– –“, the device cannot enter standby mode at this stage.
  4. Please turn down power switch to protect battery life if not charged timely. When charging, the charging symbol and a Red LED charging indicatorlight will remain ON and will go OFF once the battery is fully charged.
Lub suab tsis zoo

Yuav ua li cas yog lub suab distorted / tsawg ntim / tsawg bass / qis zoo?

  1. Xyuas seb cov cuab yeej txuas nrog tsis muaj qhov sib npaug sib npaug.
  2. Xyuas seb qhov teeb meem tseem tshwm sim yog tias lub cuab yeej txav los ze dua thiab txhua qhov teeb meem hauv nruab nrab raug tshem tawm.
  3. Xyuas seb qhov distortion los yog zoo txo ​​qis ntawm tag nrho cov ntim los yog tsuas yog nyob rau hauv siab ntim.
  4. Tshawb xyuas lub suab ntawm cov xov xwm sib txawv thiab cov khoom siv sib txawv thiab yog tias qhov kev cuam tshuam tshwm sim ntawm txhua yam khoom siv lossis tsuas yog ntawm ib qho tshwj xeeb.
  5. Xyuas seb qhov teeb meem tshwm sim ntawm txhua theem ntawm kev them nqi lossis tsuas yog nyob rau theem them qis xwb.
  6. Xyuas yog hais tias tus hais lus tsis muaj cov tee dej, yog tias lawv ua, siv lub tshuab ziab khaub ncaws kom qhuav dej los ntawm qhov deb.

Yuav ua li cas yog tias tus neeg hais lus qee lub sijhawm tseem cuam tshuam tus Hais lus?

  1. Xyuas seb qhov rov pib dua tus neeg hais lus daws qhov teeb meem.
  2. Xyuas seb qhov teeb meem tib yam tshwm sim rau cov khoom siv sib txawv thiab cov xov xwm tawm.
  3. Xyuas seb puas muaj kev cuam tshuam ntawm tus neeg hais lus thiab lub cuab yeej, txav lub cuab yeej ntawm qhov ze dua rau tus hais lus thiab saib seb nws puas tseem cuam tshuam rau nws.
  4. Sim Hoobkas-rov pib dua lub cuab yeej.

Yuav ua li cas yog tias tsis muaj suab nrov ntawm tus neeg hais lus?
Xyuas kom meej tias cov qib ntim tsis tau muab tso tseg lossis kaw lossis hloov pauv mus rau lwm qhov chaw nres tsheb FM. Yog tias koj txuas nrog lwm lub cuab yeej, xyuas kom lub ntim qib ntawm lub cuab yeej hnov ​​​​thiab tias lub cuab yeej tau txuas nrog raug.

Kev sib txuas

Yuav ua li cas txuas tus hais lus ntawm Bluetooth hom?

  1. Select Bluetooth mode by short pressing the “Mode” button.
  2. Tus Hais Lus yuav nkag mus rau hauv Bluetooth pairing hom thiab tuaj yeem nrhiav tau ntawm koj lub cuab yeej ntse.
  3. The Bluetooth LED will blink rapidly to indicate pairing mode.
  4. Enter the Bluetooth device list on your smart phone and search for “boat PartyPal 60” and select to pair. The
  5. LED will be ON and not blink when the connection has been established.
  6. Once the music starts playing, the LED light will blink slowly, disconnect the current device and repeat the above process to connect another device to the boAt Party Pal 60.

What are the button functions of Bluetooth player?

Bluetooth Muaj nuj nqi

How to Force disconnect the Bluetooth device?
Nias thiab tuav tus BT Khawm to disconnect the device from the current Bluetooth device (Warning Tone: BT_DISCONNECT), the Bluetooth LED will not blink at this time and another device can be connected to the speaker.

How to connect via Aux-in Mode?

  1. Insert the AUX cable and then press the button “MODE” to switch to AUX mode and a beep will indicate this.
  2. In Aux mode, , Short press the pause button to pause the music. Press once again to exit the pause mode.
    Short press “MODE” button to switch next mode, other buttons are not workable when in AUX mode.

How to choose EQ?

  1. Press “EQ” button to switch to Treble and Bass and use the “+/-” buttons to adjust the volume, display for
  2. Treble and display for Bass will appear after completing the adjustment.
    Allow 2 seconds to the control board for the “+/-” buttons to return to their normal voluming functions.

How to connect to MP3 mode (USB/TF)?

  1. Insert USB or TF card to enter MP3 mode. It will play music from USB or TF card automatically.
  2. Short press the pause button then double click the pause button to replay the track. Press and hold the Next/Forward button to fast forward the tracks. Press and hold the Previous/Back button to rewind tracks.
  3. Switch Player Mode: Short press the BT Khawm button to switch player mode, the screen will display the various options in which the music to be played are in loop playback, repeat playback and random playback.

Yuav ua li cas yog tias lub cuab yeej tsis txuas ntawm Bluetooth?

  1. Txheeb xyuas seb lub cuab yeej puas nyob rau hauv kev sib koom ua ke, tom qab tso lub hwj chim rau ntawm qhov taw qhia LED yuav ntsais dawb.
  2. Xyuas seb tus hais lus nyob rau hauv qhov ntau ntawm Bluetooth (feem ntau yog 10m) thiab yog tias muaj kev cuam tshuam hauv nruab nrab.
  3. Xyuas seb lub cuab yeej txuas nrog txhawb kev sib txuas Bluetooth lossis tsis
  4. Xyuas seb nws puas yog qhov teeb meem passcode thiab yog tias yog li sau 0000 / 1234
  5. Xyuas seb tus neeg hais lus txuas nrog puas muaj teeb meem software lossis tsis tau - Xyuas kom tsis nco qab lub cuab yeej ntawm Bluetooth, hloov kho cov software mobile, yog tias nws tseem tsis ua haujlwm sim lub Hoobkas rov pib dua lub cuab yeej.

Yuav ua li cas yog Aux hom tsis ua haujlwm?

  1. Xyuas yog tias restarting lub cuab yeej daws qhov teeb meem thiab yog hais tias tus hais lus nyob rau hauv Aux hom los ntawm luv luv nias lub 'Hom' khawm.
  2. Xyuas seb koj puas tau txuas lub aux cable kom raug thiab nyob rau hauv qhov tseeb kev taw qhia ntawm ob qho kawg.
  3. Xyuas seb qhov teeb meem tshwm sim txawm tias tom qab siv lwm lub cable lossis lwm yam khoom siv txuas mus rau tus hais lus.
Microphone Functionality

Kuv tuaj yeem siv lub Microphone ntawm Party Pal 60 li cas?
When the speaker is in any “MODE”, simply insert the microphone into the device, the microphone volume and reverberation size can be adjusted through settings.

Yuav sau lub suab li cas hauv Party Pal 60?

  1. In any “MODE” (insert USB or TF card) as a data storageoption for the recording and it is preferable that you switch to that post.
  2. Short press “Auto scan” and the screen display will show “PAUS”. Then, simply press and hold the REC button for up to 3 seconds to go in to recording mode (The screen will display “REC” and the recording time).
  3. Once the recording is finished, short press the “REC” button to end recording.
  4. The display will show the recording file number and will automatically play the recording file.
  5. To delete a recording: Long press the “REC” button and the screen will display “DEL” upon which the “Auto Scan” button needs to be pressed to delete the selected file.

Yuav ua li cas yog tias lub microphone ntawm lub cuab yeej tsis ua haujlwm?

  1. Xyuas kom pom tias lub microphone tsis raug thaiv los ntawm cov plua plav lossis kev cuam tshuam.
  2. Txheeb xyuas seb lub microphone tau tuav ntawm qhov deb txaus rau nws tuaj yeem khaws lub suab.
  3. Xyuas seb lub microphone tsis raug puas tsuaj xws li hnub ci ncaj qha lossis hluav taws.
  4. Xyuas seb lub microphone tsis raug dej saum toj no los yog dipped rau hauv lwm yam kua los yog tsis.
  5. Lub microphone tsis ua haujlwm siv hom aux, xyuas seb lub cuab yeej tsis nyob hauv aux hom.
  6. Sim Hoobkas-rov pib dua lub cuab yeej.

Vim li cas kuv thiaj tsis hnov ​​kuv lub microphone teb?
Xyuas kom lub microphone txuas raug raug thiab hloov mus. Kuj xyuas tias chav tsev tsis nyob hauv USB lub suab kaw hom.

FM muaj nuj nqi

What are the various FM Modes?

  1. Pib Pib: Press and hold the pause button to auto scan “87.5MH – 108MHZ”, then the scanned channel can be saved from CH01 to Ch50 and the screen will display “CH01”. After auto scanning, short press either the “Previous” or “Next” button to switch the channel and short press the CH button to change the frequency. Once the channel is changed, select the frequency you wish to keep for that channel before changing to the next one.
  2. Semi-Automatic Channel Selection: After Auto scanning, in FM mode, short press the “CH” button to switch channel and frequency. Press “Previous/Next” button to switch the channel to semi-automatic channel selection. Channel and frequency display forward or backward.
  3. FM Frequency Selection: In FM mode, short press CH button to switch channel and frequency. Press and hold the “Forward” button to switch channel forward and it will stop once it has found a channel. Press and hold the “Backward” button to switch channel forward and it will stop once it has found a channel.

Yuav ua li cas yog FM suab distorted / tsis tuaj yeem ntes FM signals / FM channel tsis tshwm sim?

  1. Thov xyuas kom meej tias cov xov hlau txuas nrog FM yog nyob rau hauv ib txoj hauj lwm tsim nyog los ntes FM signals, piv txwv li, nyob ze lub sam thiaj lossis qhib qhov chaw uas lub teeb liab pom tseeb. Yog hais tias lub teeb liab tseem distorted sim kho cov hlau txoj hauj lwm los yog hais lus txoj hauj lwm thiab saib seb nws puas txhim kho.
  2. Siv lub khawm ua si / ncua ntawm tus hais lus lossis cov chaw taws teeb kom pib tshawb cov channel dua thiab pom tias lawv tshwm.
    Lub khawm qhib ntawm cov chaw taws teeb lossis lub pob tom ntej ntawm tus hais lus tuaj yeem siv los nthwv dej los ntawm cov channel muaj.
Lwm Cov Teeb Meem Ua Haujlwm

Yuav ua li cas yog tias lub cuab yeej tsis qhib / tsis ua haujlwm?

  1. Xyuas kom tseeb tias koj lub cuab yeej muaj Bluetooth hom hloov mus thiab nrhiav tau. Kuj xyuas kom meej tias koj lub cuab yeej nyob hauv 10m ntau ntawm chav tsev.
  2. Tshawb xyuas seb lub cuab yeej puas raug them ua ntej lossis tsis tau.
  3. Kos yog tias voltage ntawm lub charger yog qhov tseeb rau tus hais lus lossis tsis yog.
  4. Xyuas los ntawm kev hloov tus neeg hais lus ntawm tus kheej, nias thiab tuav lub zog ntawm lub pob kom tsawg kawg 3 vib nas this.
  5. Xyuas seb lub cuab yeej tsis raug cuam tshuam nrog kev siv tsis raug, cov xov hlau tawg lossis raug tshav ntuj ncaj qha lossis muaj kev phom sij xws li hluav taws.

Yuav ua li cas yog hais tias lub in-built tswj ntawm tus hais lus tsis ua hauj lwm?

  1. Xyuas seb cov kev tswj tsis ua haujlwm thaum txuas nrog lwm lub cuab yeej
  2. Xyuas seb lub cuab yeej puas nyob hauv aux hom vim tias cov nyees khawm yuav tsis ua haujlwm hauv aux hom
  3. Xyuas seb tus neeg siv xov xwm siv tau txhawb nqa cov kev tswj hwm li cas thiab yog tias cov kev tswj tsis ua haujlwm ntawm kev hu lossis lwm cov xov xwm tawm
  4. Xyuas seb cov kev tswj tau puas lub cev puas tsuaj los yog raug puas tsuaj xws li hluav taws.

Yuav ua li cas yog tias muaj lwm yam teeb meem ua haujlwm nrog Pob zeb hais lus?

  1. Xyuas yog tias restarting lub cuab yeej daws qhov teeb meem.
  2. Ua kom tus neeg hais lus tso tawm thiab tom qab ntawd them rov qab ua ntej siv.
  3. Sim txuas los ntawm hom kev sib txuas sib txawv lossis cov khoom siv xov xwm.

General Cov Lus Nug

technology

Does the device have RGB Light Control?
Yog

Cov neeg hais lus puas tuaj yeem siv rau kev ua si?
Yog, nws tuaj yeem ua tau. Txawm li cas los xij, nws tau qhia kom tsuas yog ua li ntawd siv kev sib txuas aux li Bluetooth hom yuav muaj teeb meem latency

Device Controls

Yuav hloov hom li cas?

  1. Press the “Mode” button to switch between “Bluetooth- > USB – > TF – Card -> FM -> Aux-in” mode. A beep will indicate that the mode has been changed.
  2. The first time the speaker is switched ON, it will automatically enter Bluetooth mode. After begining use, the speaker will enter the previous selected mode when powered ON.
  3. Re-booting the speaker will revert back to Bluetooth mode and any other saved settings.

Peb puas tuaj yeem lees txais hu rau nws?
Yog lawm, ib tus tuaj yeem txais kev hu xov tooj ntawm cov neeg hais lus.

Nws puas muaj mic hauv-ua rau kev hu xov tooj dawb?
Yog lawm, Party Pal 60 los nrog lub mic tsim uas tso cai rau kev hu xov tooj dawb.

Peb puas tuaj yeem txuas nws ntawm AUX?
Yog lawm, Party Pal 60 Bluetooth Speakers kuj tuaj yeem txuas ntawm AUX cable yog tias tsis muaj Bluetooth.

Kev them nyiaj yug ntaus ntawv

Peb puas tuaj yeem siv nws thaum muab cov neeg hais lus them nqi?
Yog lawm, Party Pal 60 Portable Speakers tuaj yeem siv tib lub sijhawm thaum them nyiaj.

Lub roj teeb lub neej ntawm lub cuab yeej yog dab tsi?
Party Pal 60 offers a battery backup of 4 hours (80% Volume) on a single charge.

Kuv puas tuaj yeem them kuv cov neeg hais lus nrog lub charger mobile?
Yog lawm, Party Pal 60 tuaj yeem them nrog lub charger mobile.

Kev tiv thaiv dej / plua plav

Tus neeg hais lus puas tuaj yeem tso rau hauv dej lossis siv tau hauv qab dej?
Tsis yog. Tus hais lus tsis muaj ntawv pov thawj tiv thaiv dej. Yog li, ib qho kev sib cuag nrog dej los yog txhua yam kua yuav ua rau cov khoom puas.

Cia ib saib

Koj email chaw nyob yuav tsis tsum luam tawm.